Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    May 2015
    Reputation
    10
    Posts
    3

    ROG Theme M-ITX lan/VR honest opinions please

    This is my first amateur build with liquid cooling I learned a lot and enjoyed it, now I am looking for some feed back on how it looks. Please keep in mind this is an M-ITX case from lian li with minimal space

    SPECS
    Cpu= i7-6700k
    Gpu= Asus Strix GTX-1080 Advanced edition
    Motherboard= Asus Maximus VIII Impact m-ITX
    Ram= ddr4 2666 Avexir Impact 2x4gb Asus certified
    Psu= Silerstone modular 600w SFX
    Case= Lian Li Asus certified m-ITX
    Optical Drive= slot load Panasonic uj265 BD-R DL 6x blue-ray writer
    Storage= PNY 1Tb SSD

    Liquid Cooling
    4x corsair red led ML-120mm fans
    xspc Raystorm Cpu block
    ekwb strix 1080 waterblock
    swiftech 240mm Radiator
    monsoon MMRS 100mm reservoir
    ekwb pump mount/cap and D5 pump
    primochill revolver fittings
    monsoon 3/8"x1/2" PETG Hardline
    Click image for larger version. 

Name:	20170118_121206.jpg 
Views:	4 
Size:	134.1 KB 
ID:	63361
    Click image for larger version. 

Name:	20170118_121218.jpg 
Views:	2 
Size:	146.7 KB 
ID:	63362
    Click image for larger version. 

Name:	20170118_121043.jpg 
Views:	0 
Size:	55.8 KB 
ID:	63363
    Click image for larger version. 

Name:	20170118_121330.jpg 
Views:	0 
Size:	88.4 KB 
ID:	63364

  2. #2
    ROG Guru: Diamond Belt Array Zka17's Avatar
    Join Date
    Mar 2012
    Reputation
    199
    Posts
    8,358

    As much as I can see inside, I like it! Outside, however, not so much... too much tubing on the exterior...
    I am wondering if you would have turned the radiator around... you know, with the fittings looking backward... maybe even down-side...
    Same thing for the reservoir... turn it with the fittings toward the case...

  3. #3
    New ROGer Array
    Join Date
    May 2015
    Reputation
    10
    Posts
    3

    thanks for the input. the swiftech radiator I used would have blocked the upper inlets if I turned it around (that was how I first saw going together), and the case is so small if I turned the reservoir around the loop would be smack dab in the motherboard. my goal was not to use any 90s or 45s so even if I turned the reservoir 1/4 turn the tube would bend outside the width of the case. I will edit the original post with a front view of the case open.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •