Results 1 to 5 of 5

Thread: AURA is lagging

  1. #1
    ROG Member Array Findolin PC Specs
    Findolin PC Specs
    MotherboardAsus Maximus IX Hero
    ProcessorIntel i7-7700K
    Memory (part number)G.Skill Trident Z RGB 16GB DDR4-3600
    Graphics Card #1Asus Strix GTX 1070 OC
    MonitorAsus PG278QR
    Storage #1Samsung 960 Evo 500GB NVMe SSD
    Storage #2Seagate Barracuda 3TB HDD
    CPU CoolerNZXT Kraken X62
    CasePhanteks Eclipse P400S TG
    Power Supplybe quiet! Straight Power 10-CM 700W
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G600
    Headset SteelSeries Arctis 7
    OS Windows 10 Pro x64

    Join Date
    Mar 2017
    Reputation
    10
    Posts
    15

    AURA is lagging

    Hey, i have an issue with AURA on my Maximus IX Hero.
    If i set the lighting settings in the software to something dynamic, it will always lag for some seconds.
    Example: If i set the settings to "comet", the cycle will stop at some point (RAM or LED strip most of the time) and stay there for like 1-2 second. after that it goes on. that happens in almost every sequence. Same behavior for "flash and dash", "strobing".

    The following parts are involved:
    Maximus IX Hero
    GTX 1070 Strix
    G.Skill Trident Z RGB
    Phanteks P400S TG + RGB Strip (connected to RGB_header 1)

    The LED control of the case is turned off (of course)

    Any ideas on this issue?

  2. #2
    ROG Member Array Findolin PC Specs
    Findolin PC Specs
    MotherboardAsus Maximus IX Hero
    ProcessorIntel i7-7700K
    Memory (part number)G.Skill Trident Z RGB 16GB DDR4-3600
    Graphics Card #1Asus Strix GTX 1070 OC
    MonitorAsus PG278QR
    Storage #1Samsung 960 Evo 500GB NVMe SSD
    Storage #2Seagate Barracuda 3TB HDD
    CPU CoolerNZXT Kraken X62
    CasePhanteks Eclipse P400S TG
    Power Supplybe quiet! Straight Power 10-CM 700W
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G600
    Headset SteelSeries Arctis 7
    OS Windows 10 Pro x64

    Join Date
    Mar 2017
    Reputation
    10
    Posts
    15

    No ideas on this issue?

  3. #3

  4. #4
    ROG Member Array We Gone PC Specs
    We Gone PC Specs
    MotherboardASUS Hero Alpha
    ProcessorI7 6700K @ 4.5 @1.312v
    Memory (part number)Corsair 3200 4x8 @ 3300
    Graphics Card #1GTX1070
    MonitorPG279Q & 226BW
    Storage #1Sansung 850 500gb SSD
    Storage #22TB Seagate
    CPU CoolerApogee Drive II
    CaseCM Stryker
    Power SupplyEVGA P2-o750-X1
    Keyboard Logitech G810
    Mouse Logitech G502
    Headset/Speakers Logitech 5.1 X-540
    OS W10

    Join Date
    Aug 2016
    Reputation
    13
    Posts
    9

    Good Luck, I can't get it to save setting, every time I reboot I have to reset the colors I had chosen......Can't count how many times I have un-install and re-installed.. Unfortunately I just turn it off now!!
    I go back to the 8088 days.... Asus MB's, P5N32-E SLI Q6600, Rampage Formula X48 still running @ 3.5, Maximus VIII Hero Alpha.

  5. #5
    ROG Member Array Findolin PC Specs
    Findolin PC Specs
    MotherboardAsus Maximus IX Hero
    ProcessorIntel i7-7700K
    Memory (part number)G.Skill Trident Z RGB 16GB DDR4-3600
    Graphics Card #1Asus Strix GTX 1070 OC
    MonitorAsus PG278QR
    Storage #1Samsung 960 Evo 500GB NVMe SSD
    Storage #2Seagate Barracuda 3TB HDD
    CPU CoolerNZXT Kraken X62
    CasePhanteks Eclipse P400S TG
    Power Supplybe quiet! Straight Power 10-CM 700W
    Keyboard Logitech G910 Orion Spark
    Mouse Logitech G600
    Headset SteelSeries Arctis 7
    OS Windows 10 Pro x64

    Join Date
    Mar 2017
    Reputation
    10
    Posts
    15

    Thanks for your answer!

    Turned out it's the CAM software (v 3.3.1) i am using with my NZXT Kraken X62 causing this problem.

    If the program is completely closed from the taskbar, everything works fine.

    I should have suspected that earlier, since there a so much more problems with CAM. This software is a piece of trash.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •