Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

G.Skill Trident Z DIMM Kit 2x16GB (F4-3200C14D-32GTZ)

harrysun
Level 7

‎04-05-2017 09:58 AM - last edited on ‎03-05-2024 10:31 PM by Community Admin

I'm using this DDR4 kit G.Skill Trident Z DIMM Kit 2x16GB (F4-3200C14D-32GTZ)
64158
(Created with Thaiphoon Burner Freeware Version Download)
63736

HCI Design MemTest pending: @DDR4-3200 CL14-14-14-32-63-2T 1.350V

AMD Ryzen R7 1800X no-OC/Stock, Stepping 1 Revision ZP-B1
ASUS ROG CROSSHAIR VI HERO, BIOS 0083 04/07/2017
Motherboard Slots: DIMM_A2, DIMM_B2
Download ASUS BIOS 0083 configuration file: harrysun_02_RAM3200CL14_CPU3600_settings.txt

  • Advanced \ AMD CBS \ UMC Common Options \ DDR4 Common Opitions > ProcODT = 96 Ohm (Standard Auto/53.3 Ohm)
  • Extreme Tweaker > BCLK Frequency = 120.0000 (Standard Auto/100.0000)
  • Extreme Tweaker > DRAM Timing Control = 14-14-14-14-34
  • Extreme Tweaker > DRAM Voltages = 1.350V (Standard 1.350V)
  • Extreme Tweaker \ External Digi+ Power Control > DRAM VBoot Voltage = Auto


CPU-Z validation: http://valid.x86.fr/6hjcyp
64159641606416164166

Archive:[/HR]

harrysun on 5th of April 2017 wrote:

Prime95 stable 1.5h: @DDR4-2666 CL14-13-13-32-63-1T 1.350V

AMD Ryzen R7 1800X @3975MHz, Stepping 1 Revision ZP-B1
ASUS ROG CROSSHAIR VI HERO, BIOS 1002 03/24/2017
DDR4-3200, CL14-14-14-34-48 1.350V Ranks:2 (2R)
Motherboard Slots: DIMM_A2, DIMM_B2

637336373463735
0 Kudos
7,394 Views
6 REPLIES 6

Saikamaldoss
Level 7

‎04-16-2017 06:38 PM

harrysun wrote:
I'm using this DDR4 kit G.Skill Trident Z DIMM Kit 2x16GB (F4-3200C14D-32GTZ) successfully with following configuration

AMD Ryzen R7 1800X @3975MHz, Stepping 1 Revision ZP-B1
ASUS ROG CROSSHAIR VI HERO, BIOS 1002 03/24/2017
DDR4-3200, CL14-14-14-34-48 1.350V Ranks:2 (2R)
Motherboard Slots: DIMM_A2, DIMM_B2
Prime95 stable 1.5h: @DDR4-2666 CL14-13-13-32-63-1T 1.350V


I have the same ram and same processor... I can get up to 1399 with 16... did you bench yours with stock ? Any luck with higher speeds ? I am on 082 bios **
SKD007 https://valid.x86.fr/jhqk36
0 Kudos

poisson21
Level 7
In response to Saikamaldoss

‎04-18-2017 02:40 AM

I have 2 kit of this RAM, at the moment i can run them at 3200 Mhz with my 1800x, bios 083.
101*40.25 bclk.
1.375 dram and dram boot.
Soc 1.0v
cpu v 1.45 +llc3.
strap 3200 Mhz.
But i can't lower my timming, atm 18-16-16-16-36.
If you want to train your ram , start with 2666 strap, with loose timing (18-16-16-16-36) once, restart, choose 3200 strap , restart, see if there is any effect,
if yes, you can try after that to lower your timing, one at a time.
0 Kudos

Saikamaldoss
Level 7
In response to poisson21

‎04-18-2017 01:36 PM

poisson21 wrote:
I have 2 kit of this RAM, at the moment i can run them at 3200 Mhz with my 1800x, bios 083.
101*40.25 bclk.
1.375 dram and dram boot.
Soc 1.0v
cpu v 1.45 +llc3.
strap 3200 Mhz.
But i can't lower my timming, atm 18-16-16-16-36.
If you want to train your ram , start with 2666 strap, with loose timing (18-16-16-16-36) once, restart, choose 3200 strap , restart, see if there is any effect,
if yes, you can try after that to lower your timing, one at a time.


thanks a lot man. Will try that today.*
SKD007 https://valid.x86.fr/jhqk36
0 Kudos

Saikamaldoss
Level 7
In response to poisson21

‎04-18-2017 07:35 PM

poisson21 wrote:
I have 2 kit of this RAM, at the moment i can run them at 3200 Mhz with my 1800x, bios 083.
101*40.25 bclk.
1.375 dram and dram boot.
Soc 1.0v
cpu v 1.45 +llc3.
strap 3200 Mhz.
But i can't lower my timming, atm 18-16-16-16-36.
If you want to train your ram , start with 2666 strap, with loose timing (18-16-16-16-36) once, restart, choose 3200 strap , restart, see if there is any effect,
if yes, you can try after that to lower your timing, one at a time.


No luck ... didn't work. Can you save the profile using USB option and share it ? May be some other setting needs to be tweaked **
SKD007 https://valid.x86.fr/jhqk36
0 Kudos

harrysun
Level 7
In response to Saikamaldoss

‎04-23-2017 01:45 AM

I've updated the initial post with my latests findings. For me ProcODT = 96 Ohm was the key to succeed. I'm now at @3200CL14 as described. The next night a HCI Design MemTest Extended Edition will be run. First load tests with 3DMark working fine.
0 Kudos

BaneSilvermoon
Level 7
In response to harrysun

‎04-23-2017 10:53 AM

harrysun wrote:
For me ProcODT = 96 Ohm was the key to succeed.


Third or fourth time I've heard this in a couple weeks. Not a setting I had ever heard of before then, and I've been completely unable to find this in the BIOS. Where is it located?

::edit::
Just saw where you pointed it out in the first post. Guess that setting doesn't exist yet in the officially released versions.
0 Kudos