04-12-2017 06:26 AM - last edited on 03-05-2024 10:33 PM by ROGBot
04-12-2017 06:31 AM
lsh01123 wrote:
1700@3.75 (100*37.5)
llc 3, stable 1.308@hwmonitor
gskill trident Z rgb 3000mhz 8g * 2
2933mhz 14-14-14-14-34 1.35v
prime 95 small 10hours passed.
no problem with warm or cold boot.
but only problem with boot after ac loss (or Erp enable setting).
q-code f9, then 2133 default setting boot.
setting ram timing auto never make such problems.
I've tried
14-auto-auto-au..
soc up to 1.1v
dram vboot up to 1.5v
dram voltage up to 1.47v
all bios version
boot with retry button
etc.. but no clue.
once boot successfully, it never makes any problem!
what should I try more?
04-12-2017 07:52 AM
MrPhil17 wrote:
Try with just one DIMM on B1 after a BIOS reset.
04-12-2017 09:01 AM
MNMadman wrote:
Why B1? With one stick, it should be placed in A2.
04-12-2017 07:58 AM
lsh01123 wrote:
1700@3.75 (100*37.5)
llc 3, stable 1.308@hwmonitor
gskill trident Z rgb 3000mhz 8g * 2
2933mhz 14-14-14-14-34 1.35v
prime 95 small 10hours passed.
no problem with warm or cold boot.
but only problem with boot after ac loss (or Erp enable setting).
q-code f9, then 2133 default setting boot.
setting ram timing auto never make such problems.
I've tried
14-auto-auto-au..
soc up to 1.1v
dram vboot up to 1.5v
dram voltage up to 1.47v
all bios version
boot with retry button
etc.. but no clue.
once boot successfully, it never makes any problem!
what should I try more?
04-15-2017 05:34 AM