Results 1 to 3 of 3
  1. #1
    New ROGer Array MaFikSS PC Specs
    MaFikSS PC Specs
    MotherboardAsus Maximus VIII Extreme
    ProcessorIntel i7-7700К @4500Mhz
    Memory (part number)Samsung M378A1K43CB2-CRC 16 ГБ DDR4-2400 DDR4 SDRAM
    Graphics Card #1Zotac GeForce GTX 680 AMP! Edition 1202Mhz 6608Mhz
    MonitorLG 29UM69G-B
    CPU CoolerThermalright SA SB-E Extreme.
    CaseCooler Master CM 690 II
    Power SupplyOCZ Silencer Silencer Mk III 850W
    Keyboard CM Mech
    Mouse G 600, G700s, Tyon.
    Headset G230
    Mouse Pad Goliafus
    Headset/Speakers G230
    OS Windows 10 x64
    Network RouterTL-WR841N

    Join Date
    Apr 2017
    Reputation
    10
    Posts
    7

    How correctly to overclock the RAM on the boards of the series RoG?

    Hello friends!
    Would you like to know how to properly overclock the RAM on my board Maximus VIII Extreme
    I've never done this before.
    If there is a detailed instruction with screenshots or video here or where?
    Share your experience. I will be very grateful.
    Model of my RAM memory
    Samsung M378A1K43CB2-CRC 2x 8Gb DDR4-2400 DDR4 SDRAM

  2. #2
    ASUS HQ Service Rep Array
    Join Date
    May 2016
    Reputation
    12
    Posts
    417

    hi, MaFikSS You can adjust the memory freq at Ai Overclock Tuner (manual)
    but Memory clocking depends on the module quality and chip capability

  3. #3
    New ROGer Array MaFikSS PC Specs
    MaFikSS PC Specs
    MotherboardAsus Maximus VIII Extreme
    ProcessorIntel i7-7700К @4500Mhz
    Memory (part number)Samsung M378A1K43CB2-CRC 16 ГБ DDR4-2400 DDR4 SDRAM
    Graphics Card #1Zotac GeForce GTX 680 AMP! Edition 1202Mhz 6608Mhz
    MonitorLG 29UM69G-B
    CPU CoolerThermalright SA SB-E Extreme.
    CaseCooler Master CM 690 II
    Power SupplyOCZ Silencer Silencer Mk III 850W
    Keyboard CM Mech
    Mouse G 600, G700s, Tyon.
    Headset G230
    Mouse Pad Goliafus
    Headset/Speakers G230
    OS Windows 10 x64
    Network RouterTL-WR841N

    Join Date
    Apr 2017
    Reputation
    10
    Posts
    7

    So you need to select everything in a manual mode and test, set the voltage?
    How difficult it all is.
    With the overclocking of the processor everything is much easier.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •