05-01-2017 09:18 PM - last edited 3 weeks ago by ROGBot
05-02-2017 11:40 AM
FuryA@ASUS wrote:
USB 2.0 Header Limitation
Y Splitter Cable , may affect the 5 vmA
or extra setup the USB 2.0 add-card
05-03-2017 07:49 AM
05-06-2017 01:40 AM
05-06-2017 01:48 AM
dAlexis wrote:
Using this one:
https://ru.aliexpress.com/item/PC-Case-Internal-9Pin-USB-2-0-1-to-2-Splitter-Chipset-Enhanced-Extend...
2 USB plugs for Corsait PSU and pump (H110i), others - for front panel connectors. USB flash works OK, high current devices are attached 2 USB3.
05-02-2017 05:41 AM
PeZzy wrote:
I have a Kraken X62 and a 2 front case USB connections. I would like to have them all connected. I have 2 USB 3.0 connectors using the 3.0 header.
I bought this - 9-Pin USB Internal Header Y Splitter Cable + Molex Powered (5cm) - to split off the single USB 2.0 header on the motherboard.
Unfortunately, there seems to be a limitation of the USB 2.0 header that prevents more than two devices functioning off of it. Is this a hardware limitation or is it a BIOS limitation? I made sure USB 15 & 16 were enabled in the BIOS. It would be nice to get the 2.0 header "opened up" for more devices. There's far too many USB connections at the back - no one uses that many. I wish they had added one more 2.0 header to the motherboard.
05-02-2017 07:33 AM
05-06-2017 08:09 PM
05-07-2017 08:26 AM
JustinThyme wrote:
You need a powered hub.
Im using the NZXT
https://www.newegg.com/Product/Product.aspx?Item=9SIA6KX5DC5917