- last edited on by
ROGBot
i did all the prep for my RE2 today and posted to check mount. heres some pics
more to come...:cool:
more to come...:cool:
Really cool, looking back for some resukt! Carry on 😉
Martin_metal_88
Colenzo :Coolermaster ATCS 840 | Gigabyte's EP55-UD5 | Intel Core I7 860 @ 3.8Ghz | 4GB G.skill Trident 1600 | MSI GTX460 1GB HAWK Twin frozr | WD 640 black + WD 1TB green + WD 1TB Blue | Pionner DVR-216 | Silverstone Strider Plus 850W | Coolermaster Hyper 212 plus in push pull fan config |
Ask for more!
Colenzo :Coolermaster ATCS 840 | Gigabyte's EP55-UD5 | Intel Core I7 860 @ 3.8Ghz | 4GB G.skill Trident 1600 | MSI GTX460 1GB HAWK Twin frozr | WD 640 black + WD 1TB green + WD 1TB Blue | Pionner DVR-216 | Silverstone Strider Plus 850W | Coolermaster Hyper 212 plus in push pull fan config |
Ask for more!
Hey PCJ, I just noticed your insulation pics.
You need to fill all the gaps around the CPU IHS to keep condensation out of the socket.
Here is a pic of my board insulated.
Also, if your board fails to post with the pot mounted, you may have it screwed down too tight.
When I first mount the pot, I boot dry and warm the pot to about 60C.
This will warm the TIM and allow it to even out somewhat under the pot.
You need to fill all the gaps around the CPU IHS to keep condensation out of the socket.
Here is a pic of my board insulated.
Also, if your board fails to post with the pot mounted, you may have it screwed down too tight.
When I first mount the pot, I boot dry and warm the pot to about 60C.
This will warm the TIM and allow it to even out somewhat under the pot.
