GL553VE Automatic shutdown with Manual Fan Boost

[Bahz]

I received update form our service team that BIOS 303 has been uploaded to the support site and should appear on the list within 24 hours.

[satria_wr]

You have bios 303 file? Please send to me, thank you in advance!

BIOS 303

[satria_wr]

I received update form our service team that BIOS 303 has been uploaded to the support site and should appear on the list within 24 hours.

Dear Bahz,

Could you please ask your team to update the cpu microcode? The one in 303 is dated back in 2016. New microcode from intel is 7/2017. Thank you.

[Mubex]

short test for 303 from today's upload on support page

And yeah it resets the previous bios settings, so if you are wondering why isn't it booting into windows os,
you have to "Disable the secure boot control under security" took me a while to figure out

[Sid7886]

I received update form our service team that BIOS 303 has been uploaded to the support site and should appear on the list within 24 hours.

Thanks for clarifying Bahz. Is the BIOS 303 which the service team is going to upload same as the BIOS hotfix which was released earlier? Just want a confirmation as that was BIOS 303 as well. My system is running the 303 hotfix BIOS and i need to confirm if i have to flash the new BIOS which the team would be uploading now? If yes, is it possible to flash same BIOS again having same build number 303?

Regards,
Sid

[satria_wr]

Thanks for clarifying Bahz. Is the BIOS 303 which the service team is going to upload same as the BIOS hotfix which was released earlier? Just want a confirmation as that was BIOS 303 as well. My system is running the 303 hotfix BIOS and i need to confirm if i have to flash the new BIOS which the team would be uploading now? If yes, is it possible to flash same BIOS again having same build number 303?

Regards,
Sid

Its the same. Compare both using hex or ultracompare.

[Bahz]

Dear Bahz,

Could you please ask your team to update the cpu microcode? The one in 303 is dated back in 2016. New microcode from intel is 7/2017. Thank you.

Thanks for pointing this out, I'll let them know.

[Bahz]

Thanks for clarifying Bahz. Is the BIOS 303 which the service team is going to upload same as the BIOS hotfix which was released earlier? Just want a confirmation as that was BIOS 303 as well. My system is running the 303 hotfix BIOS and i need to confirm if i have to flash the new BIOS which the team would be uploading now? If yes, is it possible to flash same BIOS again having same build number 303?

Regards,
Sid

It should be the same so no need to reflash.

[SCTR9]

hey Guys can someone help me, I went into Bois and ever since then my laptop has been powering off when I adjust my fan speed in the gaming center as well as the cpu is now throttling back and forth between 800mhz and 3400mhz, I changed nothing in BIOS just checked the update. my CPU used to always stay at 3200 3400mhz before, now if I set my fan speed to 94% it sets the cpu to 706mhz on all 4 and then turns itself off after like 20 seconds.. what is that, if I set it to 100 % its fine, or 50 % its fine but any 80 or 90 % it just dose this crazy thing. why is the CPU now throttling so hard, and jumping around so much? Is there a turbo mode on here to enabled an over lock on the CPU?

[Simon942]

hey Guys can someone help me, I went into Bois and ever since then my laptop has been powering off when I adjust my fan speed in the gaming center as well as the cpu is now throttling back and forth between 800mhz and 3400mhz, I changed nothing in BIOS just checked the update. my CPU used to always stay at 3200 3400mhz before, now if I set my fan speed to 94% it sets the cpu to 706mhz on all 4 and then turns itself off after like 20 seconds.. what is that, if I set it to 100 % its fine, or 50 % its fine but any 80 or 90 % it just dose this crazy thing. why is the CPU now throttling so hard, and jumping around so much? Is there a turbo mode on here to enabled an over lock on the CPU?

You can fix it if you install the new BIOS update 303 . It fixed it for me ;D

Best regards Simon