Page 10 of 12 FirstFirst ... 8 9 10 11 12 LastLast
Results 91 to 100 of 119
  1. #91
    ROG Enthusiast Array
    Join Date
    Mar 2017
    Reputation
    10
    Posts
    35

    Have you tried clearing CMOS?

  2. #92
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    Just done one run so far with current settings
    This time I did not have core performance boost on lol.
    Thank you everyone that is working hard to make this
    a amazing motherboard.
    32041 Fire Strike physics score (#10 at the moment) ^^
    https://www.3dmark.com/fs/13535858
    Last edited by Mikan02; 09-04-2017 at 02:06 AM.

  3. #93
    New ROGer Array erland82 PC Specs
    erland82 PC Specs
    Laptop (Model)Dell 6530
    MotherboardROG ZENITH EXTREME
    Processor1950X @4
    Memory (part number)G.skill F4-3600C15D-16GTZ @ 3466 14-13-13-33
    Graphics Card #11080ti EKWB
    MonitorAsus rog swift pg348q
    Storage #1SAMSUNG 960 PRO 512GB
    Storage #22x 240 ssd raid & 2x Predator 240GB m.2
    CPU CoolerEK-Supremacy EVO Threadripper Edition
    CaseCore P5 Tempered Glass Snow Edition
    Power SupplyCorsair HX 1000w
    Keyboard Corsair K95
    Mouse Logitech G900
    Headset Astro A50 gen3
    Headset/Speakers Cerwin Vega 5.1 XLS
    OS W10
    Network RouterAsus RT-AC68U
    Accessory #1 Denon AVR-X2300W
    Accessory #2 Acer Projector P1525
    Accessory #3 fanatec csw v2 complete
    erland82's Avatar
    Join Date
    May 2017
    Reputation
    10
    Posts
    9

    Throttle during load

    Anyone else getting something that looks like cpu throttle during p95 testing?
    After 3 min running, my cpu is starting to downclock then go back up... and it slowly gets worse and worse.
    I have set cusom pstates in the bios.
    My temps are fine (max 60c, ryzen master), i have the new EKWB and an extra fan blowing over the vrms.
    Im at 4ghz 1,415 vcore now, i can get 4,050 but after that i cant pas p95. 1 core seems to constantly crash when i pas 4,050.
    0601bios 1950x ddr4 at 3466mhz cl 14
    Click image for larger version. 

Name:	full load.jpg 
Views:	13 
Size:	213.3 KB 
ID:	67117
    Last edited by erland82; 09-04-2017 at 11:35 AM.

  4. #94
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    @erland82
    I had similar thing happen on 2nd Fire Strike benchmark CPU clock going from max to 2.2 and up again.
    Not sure it works for you but I think I got it to vanish now cause I raised voltage to memory a bit.

    Here is the thought I had.
    Most memory is made after Intel spec.
    Some functions on X399 / X399 chipset makes voltage on memory drop,
    not found what it is yet thou.

    At default 1.2 it gets 1.1 something and when I set 1.35 it shows 1.308.
    Most memory following Intel spec is used to getting 1.35 all the time when
    XMP is enabled and 1.2 all the time when it is a default.

    So maybe
    -Some kits handles this fine.
    -Some kits does not like this at all.
    -And some kits is a mix between the two.

    My memory seems to accept most settings and post even with low voltage (knock on wood).
    But to get memory to stay at 1.35 minimum and be very similar to my Intel PC´s,
    I have set it to 1.38 and now it stays at 1.351.

    This is also something to try if anyone is having trouble with kits I guess.

  5. #95
    New ROGer Array erland82 PC Specs
    erland82 PC Specs
    Laptop (Model)Dell 6530
    MotherboardROG ZENITH EXTREME
    Processor1950X @4
    Memory (part number)G.skill F4-3600C15D-16GTZ @ 3466 14-13-13-33
    Graphics Card #11080ti EKWB
    MonitorAsus rog swift pg348q
    Storage #1SAMSUNG 960 PRO 512GB
    Storage #22x 240 ssd raid & 2x Predator 240GB m.2
    CPU CoolerEK-Supremacy EVO Threadripper Edition
    CaseCore P5 Tempered Glass Snow Edition
    Power SupplyCorsair HX 1000w
    Keyboard Corsair K95
    Mouse Logitech G900
    Headset Astro A50 gen3
    Headset/Speakers Cerwin Vega 5.1 XLS
    OS W10
    Network RouterAsus RT-AC68U
    Accessory #1 Denon AVR-X2300W
    Accessory #2 Acer Projector P1525
    Accessory #3 fanatec csw v2 complete
    erland82's Avatar
    Join Date
    May 2017
    Reputation
    10
    Posts
    9

    Throttle during load

    It was my high vrm temps that was cause of the cpu throttle.
    I set the digi power+ control in bios to standard settings, put heatsinks and a fan on the "back heatsink" of the vrms.
    Still my vrm is at 78c full load,but now i can run p95 without throttle.
    Monoblock next.

  6. #96
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    That is really good to know and glad you solved it.
    But is your IO cover fan running (COV FAN) It has a profile at end of q-fan settings.
    I think it does not start until 60C by default cause fan stops. But it can go really high rpm if wanted.
    Maybe if it started slightly earlier at lower speed. Mine is actually kinda silent until
    very high speeds, but I guess depends how silent system is. Maybe it helps a little.

  7. #97
    New ROGer Array erland82 PC Specs
    erland82 PC Specs
    Laptop (Model)Dell 6530
    MotherboardROG ZENITH EXTREME
    Processor1950X @4
    Memory (part number)G.skill F4-3600C15D-16GTZ @ 3466 14-13-13-33
    Graphics Card #11080ti EKWB
    MonitorAsus rog swift pg348q
    Storage #1SAMSUNG 960 PRO 512GB
    Storage #22x 240 ssd raid & 2x Predator 240GB m.2
    CPU CoolerEK-Supremacy EVO Threadripper Edition
    CaseCore P5 Tempered Glass Snow Edition
    Power SupplyCorsair HX 1000w
    Keyboard Corsair K95
    Mouse Logitech G900
    Headset Astro A50 gen3
    Headset/Speakers Cerwin Vega 5.1 XLS
    OS W10
    Network RouterAsus RT-AC68U
    Accessory #1 Denon AVR-X2300W
    Accessory #2 Acer Projector P1525
    Accessory #3 fanatec csw v2 complete
    erland82's Avatar
    Join Date
    May 2017
    Reputation
    10
    Posts
    9

    Yes it was running full speed. :P

  8. #98
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    Noticed AMD updated their installer for X399 chipset, still same version thou.
    http://support.amd.com/en-us/downloa...%2010%20-%2064

  9. #99
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    Fire Strike Physics Score 32128, proud of this one and
    I do not care if it gets beaten so it drops down on list.
    https://www.3dmark.com/fs/13543917
    Fire Strike Ultra 1 GPU 8166
    https://www.3dmark.com/fs/13548892
    Fire Strike Ultra 2 GPU 15151
    https://www.3dmark.com/fs/13573281
    Fire Strike Extreme 1 GPU 15525
    https://www.3dmark.com/fs/13490907
    Fire Strike Extreme 2 GPU 25523
    https://www.3dmark.com/fs/13574329
    Time Spy 1 GPU 11268
    https://www.3dmark.com/spy/2356926
    Time Spy 2 GPU 18852
    https://www.3dmark.com/spy/2357048

    All benchmarks GPU +150 Core +600 Mem
    1x GPU --> CPU @4225
    2x GPU --> CPU @4100

    ---

    First run Geekbench ,is this ok? CPU @4100
    Single-Core Score 5023 and Multi-Core Score 33834
    https://browser.geekbench.com/v4/cpu/3939542
    Last edited by Mikan02; 09-09-2017 at 02:10 PM.

  10. #100
    ROG Guru: Yellow Belt Array
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    140

    Updated on Zenith support page. ^^
    Intel LAN driver (9/11/2017)
    X399 Chipset driver (9/11/2017) (Chipset version is same as the one on AMD support page)
    ROGGameFirst (9/5/2107)

    https://www.asus.com/Motherboards/RO...Desk_Download/

    ---

    Hope to get a Enermax Liqtech TR4 360 AIO with 100% IHS Coverage in 1-2 weeks^^
    They starting to get available in EU now. A bit more expensive where I live than a NZXT X62 but not much.
    Looks like the AIO pump and the fans is controlled by motherboard like normal,
    so no silly software or USB connection to mess things up.
    http://www.enermax.com/home.php?fn=e...v1=118&no=370#

Page 10 of 12 FirstFirst ... 8 9 10 11 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •