Results 1 to 10 of 39

Threaded View

  1. #17
    Administrator Array Silent Scone@ASUS's Avatar
    Join Date
    Mar 2016
    Reputation
    124
    Posts
    1,832

    Quote Originally Posted by Jsunn View Post
    So you are saying that the fan curves in the BIOS are NOT based on CPU temp? This doesn't seem accurate to me. All of my fans will ramp up and down based on CPU temp.

    What do you mean by Tcase?
    Sorry for the basic question.

    Thanks,
    Jason

    See here for more information on Tcase. Given the fact this reading can be 10-15 Celsius lower than DTS as stated in my previous post, the CPU is likely running quite hot. Therefore, there is little reason to need a higher limit on the curve control.

    Tcase: Temperature measurement using a thermocouple embedded in the center of the heat spreader. This initial measurement is done at the factory. Post-manufacturing, the BIOS calibrates Tcase. A diode between and below the cores delivers a reading.
    https://www.intel.co.uk/content/www/...rocessors.html
    Last edited by Silent Scone@ASUS; 02-02-2018 at 05:20 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •