Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    TridentZ F4-3200C16-8GTZB memory OC

    Hi guys, I'm new here. Nice to meet you. I'm from Brazil and I'm sorry for bad English (my native language is Portuguese).

    So let's talk about memory.

    I tested some BIOS with my C6h and R7 1700, and the best of all bios for me is 9945 (9943 is also good)
    My chip is Hynix H5AN8G8NMFR-TFC, I used thaiphoon's Burner to find out (the link is here: http://www.softnology.biz/files.html
    So I've seen, my chip is developed to work at 2666 max freq., But the Gskill can run at 3200 CL16-18-18-38

    I can run at 3333mhz with 16-17-17-37 68ohm ram voltage1,475v and soc 1,175

    If you have the same chip, the best bios and configuration that I can perform are up.
    I hope I contributed.

    Waiting for a oficial bios with agesa 1.0.0.6.
    Last edited by CanalPC; 06-04-2017 at 06:24 PM.

  2. #2
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    Ainda 64 mem test
    Click image for larger version. 

Name:	02.jpg 
Views:	26 
Size:	292.9 KB 
ID:	65116

    The Thaiphoon burner info.
    Last edited by CanalPC; 06-04-2017 at 07:29 PM.

  3. #3
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    Talking *update

    I Discovered some problems with 3333mhz configuration and 9945 bios.
    After some time, i had some stutterings and drop frames. I tryed up to 80ohm and nothing change.
    I flash back the 9943 bios and 3200mhz and runs well.
    I`m still testing.

    The memory stick is TridentZ F4-3200C16-8GTZB. The Gskill sale these in Kit of 2 or 4 sticks
    Code name is TridentZ F4-3200C16D-16GTZB and TridentZ F4-3200C16Q-32GTZB.
    For now, the best bios for these memory is 9943.

    I hope to help

  4. #4
    ROG Guru: Orange Belt Array
    Join Date
    Apr 2017
    Reputation
    14
    Posts
    261

    Good information. I'm not using your memory but I've had to do a bit of work to get to full speed using the same basic method as you. My experience is here: https://rog.asus.com/forum/showthrea...16-Up-to-Speed

    With the new parameters in the 994x BIOS and something like Thaiphoon Burner or similar program to read the Intel XMP data, you can really tune up your memory for most memory brands now. Ultimately, the mobo should read those profiles and do that for you, but I'm sure that's coming.
    Tired of trolls and mods that act like this platform has no problems and it's the users fault. Later.

  5. #5
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    Nice! What`s your chip manufacture, i think is Hynix too, because the timings is very similar.
    Yes, i`m using the timings parametres showed in Thaiphoon Burner.
    The easy way to test the memory is running Battlefirld 1 or 4 multiplayer (64 players map). The memory alocated high volume data in those games and show instability when is not OK. (freezing, stuttering and fps drop)
    PS the best value for resistence is 68ohm for me.
    Last edited by CanalPC; 06-09-2017 at 05:55 PM.

  6. #6
    ROG Guru: Orange Belt Array
    Join Date
    Apr 2017
    Reputation
    14
    Posts
    261

    No, mine shows as Samsung, ?-die. I kid you not, it actually shows a question mark.

    I went to Samsungs website for chip technical data and ran the rest of the chip part number through and there are two versions that match mine and that's "D-die" and "E-die". The only difference is in the final character (either D or E) which is missing from my chips!!!

    And by the way, I also just changed to 68.6 ohms and was able to drop my memory voltage down to about 1.47 or so. I had to run it at 1.5 to make the memory work at 1T and "Gear Down" otherwise.

    Sometimes, it's "baby steps" isn't it? lol.
    Tired of trolls and mods that act like this platform has no problems and it's the users fault. Later.

  7. #7
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    Right. Yes, is a forense work to find the better way to run perfecly hahahaha.
    1.48v is a bit of high voltage... Try to change to 1.125 or 1.15v SOC voltage and reduce the dram voltage.

    Yes, Sammy have b-die, c, d, e and others...

  8. #8
    ROG Guru: Orange Belt Array
    Join Date
    Apr 2017
    Reputation
    14
    Posts
    261

    I will look at the SOC and see if it helps, thanks!

    I've tried to be careful with that voltage -- I know that's the one that has fried boards in the past.
    Tired of trolls and mods that act like this platform has no problems and it's the users fault. Later.

  9. #9
    ROG Guru: Orange Belt Array
    Join Date
    Apr 2017
    Reputation
    14
    Posts
    261

    Quote Originally Posted by CanalPC View Post
    Right. Yes, is a forense work to find the better way to run perfecly hahahaha.
    1.48v is a bit of high voltage... Try to change to 1.125 or 1.15v SOC voltage and reduce the dram voltage.

    Yes, Sammy have b-die, c, d, e and others...
    Thanks for the input but I was at 1.15 and I messed around but couldn't get the RAM voltage down.

    Finally realized part of the reason for my high voltages was the extremely high RAM boot voltage of 1.45 I was using. That set me up to need even more voltage apparently. I talk about it in more detail in another post I just wrote.

    Thanks again, though.
    Tired of trolls and mods that act like this platform has no problems and it's the users fault. Later.

  10. #10
    ROG Enthusiast Array CanalPC PC Specs
    CanalPC PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700
    Memory (part number)Gskill Tridentz F4-3200C16-8GTZB
    Graphics Card #1RX 480
    CPU CoolerWraith Spire
    CaseNZXT S340
    Power SupplySeventeam Hurricane 1200W
    OS Windows 10

    Join Date
    Jun 2017
    Reputation
    10
    Posts
    34

    hhuummm, it did not work, but let's continue testing.

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •