06-04-2017 05:50 PM - last edited on 03-05-2024 10:21 PM by ROGBot
06-04-2017 11:45 PM
06-05-2017 03:18 AM
FlanK3r wrote:
Set not DOCP, but manualy memory clock. Thats mean overclocking change to "manual" and after your choice will be memory frequency (not timings!). Set 3600 MHz. DRAM voltage 1.45V (dont worry, for Samsung chips is it very safe). VCSOC voltage 1.15V (manually). Save+reboot. You can get few cycles of posts, watch your post codes. If frozed it in post code for long time, try button reset and waiting again.
If you will be OK to post and boot, go back to the BIOS and now you can set manually timings at 16-16-16-others keep at auto.
Sometimes this memory divider could not work with high clocks and this BIOS, after is better to set BCLK combination with 2400 or 2666 memory divider. Dont forget change in ADVANCED settings PCIe lines to GEN2- in this case.
06-09-2017 05:27 PM