Page 186 of 193 FirstFirst ... 86 136 176 184 185 186 187 188 ... LastLast
Results 1,851 to 1,860 of 1925
  1. #1851
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,855

    I had the drive installed on the ram side, DIMM.2_1
    The drive will not show up in the boot menu unitl it has a boot partition on it. I have one resident in DIMM.2_1 as data only with no boot partition and its transparent in boot menu, see image below. Even the 900Ps in raid o are not seen. Simply says Windows boot manager. The two 850 EVOs in raid0 are also not seen as.....They do not have a boot partition.
    You do not need a driver, NVME drivers are native in Win 10. You only need to use an F6 driver at OS set up if you are doing a raid and the IRST drivers are abundant ane easily found if you are going that route.
    For Samsung drives they are picky and you may need to have CSM disabled and UEFI boot enabled and boot to UEFI. Sometime it will work with CSM enabled and set to other OS but it will work 100% of the time, with all other things not in the equation, with CSM disabled and boot to UEFI.
    This is what I see with 2x 900P Intel drives in VROC raid0, 2X 1TB 850 EVOs in raid0, 1 X 1TB 960 pro

    Click image for larger version. 

Name:	boot manager.png 
Views:	2 
Size:	170.1 KB 
ID:	69873


    Click image for larger version. 

Name:	900P boot DM.png 
Views:	3 
Size:	63.8 KB 
ID:	69874

  2. #1852
    ROG Guru: Brown Belt Array tistou77 PC Specs
    tistou77 PC Specs
    MotherboardRampage VI Extreme Encore
    Processor10980XE @4.6Ghz
    Memory (part number)G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    Graphics Card #1EVGA RTX 2080ti XC Ultra
    Sound CardXonar Phoebus
    MonitorDell U2721DE
    Storage #1Intel Optane 905P PCIe
    Storage #2Samsung 980 Pro
    CPU CoolerWatercooling
    CaseLian Li A77F
    Power SupplySeasonic Prime Ultra Titanium 1000W
    Keyboard Logitech LIK
    Mouse Logitech MX revolution
    OS Windows 10 Pro x64
    tistou77's Avatar
    Join Date
    Apr 2012
    Reputation
    109
    Posts
    1,643

    About Adaptive Mode, VID and Offset Negative, it's Offset Negative for Adaptive Mode or Offset Mode ?
    Thanks
    Sorry for my english


    Case: Lian Li A77F
    MB: Rampage VI Extreme Encore
    CPU: i9 10980XE
    RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    GPU: EVGA RTX 2080ti XC Ultra
    PSU: Seasonic Prime Ultra Titanium 1000W
    OS: Intel Optane 905P PCIe
    DATA: Samsung 980 Pro
    SOUND: Asus Xonar Phoebus

  3. #1853
    ROG Guru: Brown Belt Array Brighttail PC Specs
    Brighttail PC Specs
    Laptop (Model)Asus G751JT
    MotherboardAsus x299 Rampage VI Extreme
    ProcessorIntel i9-7900x
    Memory (part number)Corsair Dominator Platinum SE 3200Mhz 4x8
    Graphics Card #1MSI GTX 1080TI
    MonitorAcer XB321HK (4k,IPS,G-sync)
    Storage #1Intel 900p (Boot) 2xSM961 (RAID 0) Games
    Storage #2Samsung 850 Pro 512GB - WD Black 4TB
    CPU CoolerCustom Water Cool
    CasePhanteks Enthoo Elite
    Power SupplyCorsair AX 1200i
    Keyboard Corsair Platinum 95
    Mouse Asus SPATHA
    Mouse Pad Corsair MM800
    Headset/Speakers Kanyo Y5
    OS Windows 10 64 bit
    Accessory #1 2 x Alphacool Full Copper Radiator 420mm/280mm
    Accessory #2 Monsoon MMRS reservoir w/ 2 x D5 Vario Pump
    Accessory #3 Monsoon Free Center Compression Fittings

    Join Date
    Sep 2014
    Reputation
    33
    Posts
    1,336

    I'm just wondering if anyone with the EK monoblock for this board is having issues of airbubbles refusing to go away in the block? I have basically one bubble that keeps coming back in the upper left corner of the block, just above the outlet port. I keep tilting the machine to get rid of it, that is easy enough but wow it keeps coming back.

    It's a little annoying.
    Panteks Enthoo Elite / Asus x299 Rampage VI Extreme / Intel I9-7900X / Corsair Dominator RGB 3200MHz
    MSI GTX 1080 TI / 2x Intel 900p / Samsung 970 Pro 512GB
    Samsung 850 PRO 512GB / Western Digital Gold 8TB HD
    Corsair AX 1200i / Corsair Platinum K95 / Asus Chakram
    Acer XB321HK 4k, IPS, G-sync Monitor / Water Cooled / Asus G571JT Laptop

  4. #1854
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,855

    If the air bubble keeps returning its coming from somewhere else and just getting lodged there. I had the same occurance when I first set it up but once I got rid of the air pocket there it never came back.

  5. #1855
    ROG Guru: Orange Belt Array DooRules's Avatar
    Join Date
    Nov 2011
    Reputation
    20
    Posts
    416

    Quote Originally Posted by Brighttail View Post
    I'm just wondering if anyone with the EK monoblock for this board is having issues of airbubbles refusing to go away in the block? I have basically one bubble that keeps coming back in the upper left corner of the block, just above the outlet port. I keep tilting the machine to get rid of it, that is easy enough but wow it keeps coming back.

    It's a little annoying.
    That same bubble was very persistent in my block as well.

    I had to take the block off while still connected to the hoses. Run power to pump only and move the block around in my hand. Very easy to get rid of any air bubbles then. Of course only will work if you have enough slack in your lines to remove block and move it around. Basically as soon as I laid it flat out went the bubble.
    7980XE on Asus ApexVI
    Zotac 2080Ti
    Intel 900P
    2 x Samsung 950 Pro
    EVGA 1600W
    Alienware 34"
    Samsung 28" 4K

  6. #1856
    ROG Member Array zoobzone PC Specs
    zoobzone PC Specs
    Laptop (Model)MacBook Pro 15" Touchbar 2017
    MotherboardASUS ROG Rampage VI Apex
    ProcessorIntel Core i9 7900X
    Memory (part number)GSKILL F4-3200C14-8GTZR
    Graphics Card #1GTX1080
    Graphics Card #2GTX1080
    MonitorAcer Predator X34
    Storage #1Samsung 960 EVO
    Storage #2Western Digital 2TB Green
    CPU CoolerEKWB Customloop with EKWB RVIE Monoblock
    CaseEVGA DG-87
    Power SupplyEVGA P2 1200W
    Keyboard ASUS ROG Claymore RGB Cherry-MX Blue
    Mouse Mionix Naos 7000
    OS Windows 10 Pro x64
    zoobzone's Avatar
    Join Date
    Oct 2017
    Reputation
    10
    Posts
    21

    I also had bubbles in my monoblock. I didn't have it in my first install, however when I open up the loop and added 2 GPU, a big air bubble appeared. It took a while and eventually it all disappeared in a week.

  7. #1857
    ROG Guru: Brown Belt Array tistou77 PC Specs
    tistou77 PC Specs
    MotherboardRampage VI Extreme Encore
    Processor10980XE @4.6Ghz
    Memory (part number)G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    Graphics Card #1EVGA RTX 2080ti XC Ultra
    Sound CardXonar Phoebus
    MonitorDell U2721DE
    Storage #1Intel Optane 905P PCIe
    Storage #2Samsung 980 Pro
    CPU CoolerWatercooling
    CaseLian Li A77F
    Power SupplySeasonic Prime Ultra Titanium 1000W
    Keyboard Logitech LIK
    Mouse Logitech MX revolution
    OS Windows 10 Pro x64
    tistou77's Avatar
    Join Date
    Apr 2012
    Reputation
    109
    Posts
    1,643

    I have a problem with the leds "Power" and "Use HDD" of the case
    The one for the HDD does not work, and the Power one lights up very weakly

    Works great on my old configuration

    An idea ?
    Sorry for my english


    Case: Lian Li A77F
    MB: Rampage VI Extreme Encore
    CPU: i9 10980XE
    RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    GPU: EVGA RTX 2080ti XC Ultra
    PSU: Seasonic Prime Ultra Titanium 1000W
    OS: Intel Optane 905P PCIe
    DATA: Samsung 980 Pro
    SOUND: Asus Xonar Phoebus

  8. #1858
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,855

    Quote Originally Posted by tistou77 View Post
    I have a problem with the leds "Power" and "Use HDD" of the case
    The one for the HDD does not work, and the Power one lights up very weakly

    Works great on my old configuration

    An idea ?
    Firstly this is the X299 Section
    Secondly try making a post in the X99 area and listing what your current configuration is as well as what the old configuration was where it all worked.
    If Im wrong then please update your signature and specs in profile to reflect your current rig.
    Last edited by JustinThyme; 12-29-2017 at 03:35 PM.

  9. #1859
    ROG Guru: Brown Belt Array tistou77 PC Specs
    tistou77 PC Specs
    MotherboardRampage VI Extreme Encore
    Processor10980XE @4.6Ghz
    Memory (part number)G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    Graphics Card #1EVGA RTX 2080ti XC Ultra
    Sound CardXonar Phoebus
    MonitorDell U2721DE
    Storage #1Intel Optane 905P PCIe
    Storage #2Samsung 980 Pro
    CPU CoolerWatercooling
    CaseLian Li A77F
    Power SupplySeasonic Prime Ultra Titanium 1000W
    Keyboard Logitech LIK
    Mouse Logitech MX revolution
    OS Windows 10 Pro x64
    tistou77's Avatar
    Join Date
    Apr 2012
    Reputation
    109
    Posts
    1,643

    indeed, I have not updated my profile
    But I know where to post

    With the R6E, it's different leds (voltage) that I have to use?
    I have a pretty old Lian Li case (A77F)
    Last edited by tistou77; 12-29-2017 at 04:39 PM.
    Sorry for my english


    Case: Lian Li A77F
    MB: Rampage VI Extreme Encore
    CPU: i9 10980XE
    RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
    GPU: EVGA RTX 2080ti XC Ultra
    PSU: Seasonic Prime Ultra Titanium 1000W
    OS: Intel Optane 905P PCIe
    DATA: Samsung 980 Pro
    SOUND: Asus Xonar Phoebus

  10. #1860
    ROG Guru: Green Belt Array FireRx PC Specs
    FireRx PC Specs
    MotherboardRampage VI Extreme
    ProcessorIntel 10900 X
    Memory (part number)Corsair CMD32GX4MA2800c16
    Graphics Card #1Nvidia RTX 3090 FE
    Sound Cardonboard
    MonitorLG 34" curved
    Storage #1Samsung 960 M2 SSD 1 terabyte
    Storage #2Samsumg 860 EVO SSD 2Tb
    CPU CoolerCorsair H80i
    CaseLian Li VS2000
    Power SupplyThermaltake 1200 modular
    Keyboard Logitech K800
    Mouse Logitech
    Headset Powerbeats Pro
    Mouse Pad Xtrac Ripper XL
    Headset/Speakers logitech
    OS Windows 10 Pro 21277
    Network RouterNetGear
    Accessory #1 Logitech G940 FLight gear
    FireRx's Avatar
    Join Date
    Apr 2013
    Reputation
    33
    Posts
    713

    Tistou77,
    I'm still in my Lian Li VS 2000 case and the LED's are fine. is your Newer than mine??

    Intel Core i9 10900X @4.7ghz @1.182v
    Asus Rampage VI Extreme [bios 3105]
    LG (34U97-s) Monitor 3440 x1440
    Nvidia RTX 30909 FE
    Windows 10 Pro
    32gbz Memory

Page 186 of 193 FirstFirst ... 86 136 176 184 185 186 187 188 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •