06-22-2017 09:43 AM - last edited on 03-05-2024 10:18 PM by ROGBot
06-22-2017 10:09 AM
06-22-2017 10:52 AM
panzlock wrote:
What's your ambient temperature?
VGA fans operating as they should?
I'd also mount the radiator/fans on top and have them blow air out. Front of case sucking clean air into case, thus always maintaining clean airflow from front to back without disruption toward the rear fan which blows the warm air out. This should also help dissipate the heat rising from the VGA. With your setup the air being sucked in by radiator fans is warmed as it passes over the radiator and the air being sucked in from the top disrupts front to back airflow.
06-22-2017 11:11 AM
marcelmaria wrote:
The problem in my Lian Li PC-O8 is that fans can not be mounted in the front of my case.
See youtubelink.
https://www.youtube.com/watch?v=QC0QAIflBZY
06-22-2017 11:27 AM
06-22-2017 11:48 AM
06-22-2017 12:01 PM
06-22-2017 01:16 PM
06-22-2017 01:28 PM
panzlock wrote:
Questions raised by techreport about that particular case: http://techreport.com/news/28387/dont-throw-stones-inside-lian-li-pc-o8
As soon as I saw pictures of that case I saw the red flags. Your VGA is dumping excess heat directly into that MB chamber. So is the MB itself. The case would be fine if you had a water loop cooling all components but I guarantee the heat generated by existing components is being trapped in that chamber due to poor airflow.
If the exhaust fan is not blowing out hot air, would you say it's warm air at least? Or does it feel cool?
06-22-2017 01:56 PM
marcelmaria wrote:
Air just feels cold. Is it perhaps useful to change the 2 intake fans on the top to outake and the back fan on the back as an intake?