ROG STRIX B350-F GAMING issues

[gaspar.lobo]

Have you by any chance over clocked your CPU also? Just wondering as my 3000 ram will only run stable when the CPU is at stock settings, so if your CPU is over clocked perhaps try setting this back to stock and then see if the ram is stable at the 3200.

No, im running CPU at stock

Is that by any chance the F4-3200C16D-8GVKB kit? I have the same kit and can't get past 3066 either.

Yes, it is indeed

[Nico23ru]

Again If you are having issues with getting your ram to run at the speed you want are you also OCing your CPU if so disable this and you might find it will now run the higher speed ram stably

Im running CPU at stock
Ryzen 5 1600X

[Fredy M]

Im running CPU at stock
Ryzen 5 1600X

you could try to set docp profile not docp standard...my lpx 3000 is oc`d @3200 with docp profile but with docp standard it isn`t stable...

[CornFlakes]

you could try to set docp profile not docp standard...my lpx 3000 is oc`d @3200 with docp profile but with docp standard it isn`t stable...

Which settings are you using? Or did you just load the docp and set it to 3200MHz?

[Miizoo]

Hi guys , i´m new to the forum. I´d like to explain my lack of judgement when "upgrading" from BIOS 3401 to 4024, which wasn't a smart move since i had zero issues with 3401.
Now i cant get my ram to work properly at 3000 Mhz, and any game crashes in 5 minutes of less.
I managed to downgrade to 3803 but that´s the lowest the board let´s me go and i can only use the ram at 2866 Mhz.
I tried installing the 3401 but it tells me "not a proper BIOS file".
But i have seen a few here on this thread claiming to revert back to 3401, can it be done on an Asus motherboard!?
Read somewhere you can only downgrade to 3805.
I already found online shops selling the BIOS chip for 15 to 20 bucks, but i really didn't want to go around messing with the motherboard unless it´s the only way.
Thanks in advance.

Specs:

Asus B350 F Strix ROG Motherboard
Ryzen 1600 Processor
16 Gb of G.Skill Ripjaws V CL15 Ram
RX 580 Sapphire Nitro+ 8 gb (the blue one)
650 Silver rated LC-Power PSU.
And a standard Seagate 1Tb Hard drive.

Just logged in to the site to confirm that I had the same issues as you. Fine with 3401, G Skill Flare X running 3200mhz CL14 with DOCP. Updated all the way to 3803 a while ago, was a mess! BSOD after BSOD.

Used the guide posted here for Rolling back to 3401. Worked like a charm. Back to 3200mhz on the ram and Ryzen 1700 @ 4.00ghz with 1.34v, medium LLC. Average voltage 1.356 during gaming, max v just sometimes as a spark to 1.395v, guess to maintain stability. Happy Days. Still thinking of switching to x470...

[Fredy M]

Which settings are you using? Or did you just load the docp and set it to 3200MHz?

yes, I just set it to docp and manually set the freq to 3200 Mhz, hit F10 and that`s it, everything else is on auto

[haze.1986]

In the latest bios update I could no longer get wake-on-lan to work anymore. Did anyone manage to get it working?

[Fredy M]

In the latest bios update I could no longer get wake-on-lan to work anymore. Did anyone manage to get it working?

...for lolz I tried to see if it`ll work and it did, though it was quite a pain because of all the power management settings enabled by default...
I used this as guide https://www.youtube.com/watch?v=VG6sCC4afRI and after that I googled a bit because it would work once but after shutdown I couldn`t start it up again unless I drained the mobo (flip the psu switch to off then hold the power button) so in order to work...open device manager, right click on the intel nic, properties, hit advanced and disable energy efficient ethernet, enable PME and wake on magic packet if its disabled...and it should work...best of luck

[haze.1986]

Thanks a lot Fredy. I had most config correct and was having the same thing, works once and doesn't work after.

Followed your settings on disabling energy efficient ethernet and enabling PME. Now it works everytime. Appreciate this!

[Fredy M]

Thanks a lot Fredy. I had most config correct and was having the same thing, works once and doesn't work after.

Followed your settings on disabling energy efficient ethernet and enabling PME. Now it works everytime. Appreciate this!

cheers mate, happy to help