ROG STRIX B350-F GAMING issues

[AniChatt]

I had the same problems with my flarex 3200 Kit, if you choose D.O.C.P it will run just fine and will pass every test but games wil still crash randomly.
I have it on default right now at 2400 MHZ and everything works so I would suggest you try to run your RAM at default too and see if it helps.

The 2933 or 3066 Mhz DOCP should work just fine upto 3803 bios flarex kits. I was running defualt docp of 3133 in last 3803 bios just fine however making it 3200 crashes games randomly. Now with this latest bios 3805 defualt 3200 docp and voltage of 1.370 works with out any issue. But it again crashes if I reduce voltage from 1.365 or below.

[Azyrion]

I've tried with both 2133Mhz(standard config) und 2400Mhz Memory clock but it's still the same issue. Doesn't matter whether it's 37 or 39 multiplier it still goes down to 22 multiplier outside the bios. It's like I'm missing/forgetting something. Is there any option I have to deactivate or activate before OC?

EDIT: Saw the things I did worng after seeing this vid ASUS B350 & X370 Ryzen Overclocking Walkthrough. Now my system works fine at 3.9Ghz CPU clock and 3066Mhz Memory clock

EDIT2:On another note: How to stabilize system at higher memory clock? 3200Mhz is good for everyday applications but games a gonna crash my system at random intervalls

[BtheNewB]

I've tried with both 2133Mhz(standard config) und 2400Mhz Memory clock but it's still the same issue. Doesn't matter whether it's 37 or 39 multiplier it still goes down to 22 multiplier outside the bios. It's like I'm missing/forgetting something. Is there any option I have to deactivate or activate before OC?

EDIT: Saw the things I did worng after seeing this vid ASUS B350 & X370 Ryzen Overclocking Walkthrough. Now my system works fine at 3.9Ghz CPU clock and 3066Mhz Memory clock

EDIT2:On another note: How to stabilize system at higher memory clock? 3200Mhz is good for everyday applications but games a gonna crash my system at random intervalls

So what was it that you did differently?
Have you tried higher mem frequency and loosening the timings by a or 2 notches? Maybe that will do the trick.

[Ryzen94511]

Don't go with ASUS. Go with ASROCK.
StriX B350-F is not good board.

[Azyrion]

So what was it that you did differently?
Have you tried higher mem frequency and loosening the timings by a or 2 notches? Maybe that will do the trick.

I deactivated all the power saving options und changed the offset mode and it worked

[AniChatt]

I deactivated all the power saving options und changed the offset mode and it worked

Pls do your homework first before ocing.

[MaxxDamage]

The 2933 or 3066 Mhz DOCP should work just fine upto 3803 bios flarex kits. I was running defualt docp of 3133 in last 3803 bios just fine however making it 3200 crashes games randomly. Now with this latest bios 3805 defualt 3200 docp and voltage of 1.370 works with out any issue. But it again crashes if I reduce voltage from 1.365 or below.

At me next BIOS the stable one (3803) and you are not divorcing again, because this turning up was so plain.

1600X CPU , G.SKILL RipjawsV 16GB (2x8GB) DDR4 3400Mhz F4-3400C16D-16GVK RAM

CPU @ 3.975GHz (x39.75)
RAM @ 3000MHz / CL14

I may declare that there was a G.SKILL FlareX 16GB (2x8GB) DDR4 3200MHz F4-3200C14D-16GFX at me that 3000MHz was not going! B-die Samsung was chip ... how this is then? Present RipjawsV more stable than separate Ryzen produced / sleigh Flare-X (I gave up next and RipjawsV was left over and with this the 3000/CL14 atom stable)

[pobutproud]

Thanks go out to those who provided the good advice. Set RAM voltage to 1.25, turned off that boost feature, applied 3805 BIOS. And it worked.

Ran a a few hours of stress tests and nothing bad happened. It's not a gaming setup (no overclocking, etc.) and RAM speed is 2400 MHz. And now I can run a bunch of VM's.

[Kostas7]

mb : asus b350 strix
cpu: ryzen 2400g
memory: corsair 2x4gb 3000mhz
psu: corsair cx550m
latest bios updated
latest win 10 updates done
latest chipset update done
latest driver been installed
keep jetting video tdr failure: atikmpag.sys ever at underclocked cpu/igpu
Have installed fresh win10 pro 2 time already
No menory issies
mb overvolts cpu 1.4 at stock
under 1.37v no post at all
at gfx auto igpu work at 400hz
I can't make it stable no matter what, any help is appreciated

any ideas ?

[celab]

beware, latest audio drivers from today ruined my fc5 game with usb speakers. i have a very loud background noise that makes playing and working on the desktop not possible. i hope this will be gone after the todays win10 update 1803, otherwise i have to go back to 6.0.1.8339. also the new version is not whql.

asus what is wrong with you? QT your stuff before releasing. if you need a tester, let me know.

also my flarex 3200 are now stucked at 2666. this is a joke compared to my msi b350 mate.
lan drivers do notget an update either. they are not to shabby, but could be better.

overclocking is also a no go with my 1600 on this board/bios. or do they need to update occt test mark to suite this product? running 4.5.1. will freeze the pc when going over 3.4ghz. on water. something really went wrong with this product. first time after 15 years i bought asus. now i wish i had sticked with gb or msi, like in the years before.

in my humble opinion, that asus hype turns out to be fake news for me ^^