cancel
Showing results for 
Search instead for 
Did you mean: 

Random hang on Boot Qcode 40 the mancine boots to check disk

jd63636
Level 7
Randomly when I boot I get the first ROG screen then a hang (30 seconds) with qcode 40. Then I get the Rog screens and the machine boots and I get a check disc which I let run and then Win 10 boots normally. If the machine boots with no hang I do not get the check disc at startup.

I have run AS-SSD and Crystal Disk Mark as well as Magician and the SSD's all report 100% health. The only odd occurance i have seen is after I switched to the corsair ram due to the D15 if I try to run XMP instead of automatic in the Bios the Corsair ram does not like it and I got BSOD's which I tracked down to memory. I have done a fresh reinstall of windows and all drivers as well. Other than that I am running AI Suite 3 V1.01.56 for the Xpert fan control, EVGA Precision X 6.1.6 for the GPU and Aura V1.04.29

I am looking for possible causes and things to try before buying ram to swap since I have to pull the MoBo to swap it due to the D15 cooler. Specs below

Bios ver: 0906
GeForce Driver: 384.76

Thanks

Corsair Carbide 400c - 2 Noctua NF-A14PWM front intake - Noctua NF-F12PWM rear exhaust - Asus Maximus IX Hero - Core i7 6700k – Noctua D15 - EVGA GTX 1080 Ti FTW 3 – 16GB Corsair Vengence LPX DDR4 3200 - 500GB Samsung 850 Evo M.2 - 1TB Samsung 850 EVO - Evga SuperNova 750 G3 - Logitech G900 Chaos Spectrum - Logitech G213 Prodigy - Dell S2716DG
1,337 Views
2 REPLIES 2

kkn
Level 14
that memmory, is it one kit or more then one kit?

Chino
Level 15
DDR4 3200 might require some manual tweaking on certain CPUs. Here are some guidelines:



























DDR4 frequency rangeRequired CPU VCCIO Voltage rangeRequired CPU System Agent Voltage range
DDR4-2133 ~ DDR4-28001.05V ~ 1.15V1.05V ~ 1.15V
DDR4-2800 ~ DDR4-36001.10V ~ 1.25V1.10V ~ 1.30V
DDR4-3600 ~ DDR4-42661.15V ~ 1.30V1.20V ~ 1.35V