Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Rampage Edition 10 | Motherboard won't allow 64GB RAM on 3200mhz speed

Amani9
Level 7

‎08-03-2017 01:25 AM - last edited on ‎03-05-2024 10:08 PM by Community Admin

Hello,

I'm trying to install new ram kits i got (64GB on 3200mhz speed).. all ram slots are working, i've updated all drivers.. and the motherboard will only take 16GB 3200mhz speed, or 48GB on 2400mhz speed (max)

those are the rams and they are compatible with the motherboard: https://www.newegg.com/Product/Product.aspx?Item=N82E16820232482&cm_re=RGB_ram-_-20-232-482-_-Produc...

my pc specs are:

OS: W10
CPU: Intel Core i7-6900K
GPU: ZOTAC GeForce GTX 1080Ti AMP Extreme Core Edition
MB: ASUS Rampage V Edition 10
Solid State: Samsung 950 PRO 512GB M.2 & Samsung 850 Pro Series 1TB
Hard Drive: HDD WD Black 4TB
PSU: Corsair AX1500i 1500W
Case: Corsair 760T White



Thanks,
0 Kudos
3,048 Views
4 REPLIES 4

Chino
Level 15

‎08-04-2017 11:49 AM

Combining memory kits will give you headaches. Swap those kits for a single kit of the capacity that you want.

Also Running 64GB at 3200MHz on this platform will require manual tweaking. Make sure you're using the latest BIOS for the motherboard since later revisiones help with DRAM overclocking. If your system fails to post, check which QCODE is being displayd on the DEBUG LED.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

davemon50
Level 11

‎08-04-2017 04:59 PM

I got my 3333 chips to run on RVE10 at 3000 MHz with no manual adjustments and XMP only. Have you tried a little lower than 3200 ? Give it a go and see maybe if that's enough for you.
Davemon50
0 Kudos

Godofmosquitoes
Level 7

‎08-07-2017 06:54 AM

I'm using the F4-3200C14Q-64GVK kit from G.Skill at 3200MHz with no problems. I can even use the T1 setting instead of T2, without any instability, with VCCSA at 1.25V.
0 Kudos