Results 1 to 2 of 2
  1. #1
    ROG Member Array bbaxter18 PC Specs
    bbaxter18 PC Specs
    MotherboardASUS Maximus IX Formula
    ProcessorIntel 7700K
    Memory (part number)32GB Trident Z RGB 3200Mhz
    Graphics Card #1ASUS Strix 1080TI ROG Poseidon Platinum Edition
    Storage #12x Samsung NVME 250 GB
    Storage #25TB Toshiba x300
    CPU CoolerXSPC Intel Raystorm Copper Edition
    CaseCoolermaster C700P
    Power SupplyEVGA Supernova P2 1200W
    Headset/Speakers Kingston HyperX Cloud Revolver
    OS Win 10
    Network RouterAsus RT-AC87U
    Accessory #1 Custom made RGB HD120
    Accessory #2 MCP355 with XSPC Top

    Join Date
    Aug 2014

    Angry GTX 1080TI Poseidon vga RGB Header not working correctly

    So, when i plug an RGB strip into the header on the GPU, Green stays on and Red turns off. Ive double checked my RGB strip on the motherboard and ops check good. This is definitely related to the RGB header on the Poseidon. If i cut (disconnect) specifically the green wire from the RGB strip, i get my red back. With Green connected Green and Blue seem to work just fine, no red. With Green cut, Reds and blues work just fine.

    I would think that there is a short from red to green on the male header side, but when i tell aura (VGA software not full sync suite) to turn off, the Strip only illuminates green, so this could very well be a software issue, I have also tried full aura sync and it seems like via the VGA header with the same outcome. I guarantee my LED's as working correctly so does anybody have any idea on how to get this working properly.

    GPU tweak shows "ASUS LED Control" version

  2. #2
    Ex-employee Array
    Join Date
    Jun 2020

    This issue is probably due to defective wire, I experienced the same issue on one of the boards I was testing on with the GTX 1080 Ti. After changing the cable, the software was able properly calibrate. You can also try uninstalling software and then cleaning registry, we did however have a beta version of AURA during Computex when this happened. So far it seems no one else is having this issue so it could be just something wrong with the cable or some other conflict with the software.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts