Zenith Extreme Beta UEFI 0901

[fr3ak_pl]

obv something will happen, most likely they will release new Zenith Extreme V2 motherboard, which will fix previous issues and add few new. At the time they fix all of them there will be new generation of CPUs and MB...

[Cory29]

9/26 801 was released
its still not pushed as a public release
something is giving them trouble or they moved on

[8ball1986]

i triyed the 0801 Bios because i have Problems with my RAM (G Skill TridentZ RGB F4-3600C17-8GTZR)Still i run on frequenzy 2133MHz.
if i use xmp and the full 3600MHz my Computer will hang after some time while gaming. Only one 3600MHz ram is at the Support list. i tryed every Beta Bios.
Is there a new Bios Rev comming soon?

[CaptainFist]

i triyed the 0801 Bios because i have Problems with my RAM (G Skill TridentZ RGB F4-3600C17-8GTZR)Still i run on frequenzy 2133MHz.
if i use xmp and the full 3600MHz my Computer will hang after some time while gaming. Only one 3600MHz ram is at the Support list. i tryed every Beta Bios.
Is there a new Bios Rev comming soon?

Your Ram is Stable @ 3200 with the Stilts safe setting for 3200 in the memory profiles...

[IvoSilva]

New bios folks. Elmor shared it on overclock.net board;

Here's a test bios which improves DRAM margins when using Hynix-based DIMMs in 2DPC configuration. http://www.mediafire.com/file/nxscgm...-ASUS-0007.zip

And

Here's also a new version of LiveDash which reports correct dynamic CPU Frequency: https://www.mediafire.com/file/in7do...sh_1.01.07.rar

[CaptainFist]

New bios folks. Elmor shared it on overclock.net board;


And

Any other changes?

[IvoSilva]

Any other changes?

None that where mentioned by Elmor, but looking at the BIOS size differences from 0801, I would say more code changed had to be done/added than what was mentioned... I suspect.

[spadizzle]

So far, so good! like really good!

I can now run at 3600 mem speed with the recommended timings. Before it was 3333. Ran Memtest for a bit also. no errors.

If any issues come up ill post back.

Edit: So the board is handling the memory way better now, but still no 100% at 3600 for me. So I set it back to 3333 for the time being.

[MikeMK]

Hey guys... quick question.

Is the Zenith Extreme Beta bios working on the X399 Strix too, or is it only for the Zenith?

Thanks!

[xxBOOSTYxx]

So far, so good! like really good!

I can now run at 3600 mem speed with the recommended timings. Before it was 3333. Ran Memtest for a bit also. no errors.

If any issues come up ill post back.

Edit: So the board is handling the memory way better now, but still no 100% at 3600 for me. So I set it back to 3333 for the time being.

May i ask what ram you are using?