Results 1 to 4 of 4
  1. #1
    ROG Member Array
    Join Date
    Feb 2017

    Post Warning - check your case type before buying motherboards with bluetooth

    Something to be aware of if, like me, this never even crossed your mind during a build: bluetooth signals from motherboards like the Maximus IX Code cannot penetrate steel PC cases.

    I confirmed this by first emailing the manufacturer of my BeQuiet! DarkBase case who confirmed the case's material. Next I opened the case and my earphones connected immediately to the Maximus IX Code motherboard's built-in bluetooth signal. Replacing the case disconnected the earphones. I repeated this 2 or 3 times with the same result. The earphones were no more than a foot away from the motherboard.

    There is no information anywhere that I could find which mentions bluetooth signal strength through case material.

    Just something else for builders to keep in mind if they intend on using a motherboard's built-in bluetooth. Hope it helps!

  2. #2
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013

    Did you connect the antennas on the back plate?
    Most MOBOs that come with WiFi/BT use a single device for both and they require an antenna to work as designed.
    Sometimes you can get a signal if you are right on top of it with your wireless/BT device but don't expect stellar performance and do expect frequent drop outs and issues like not working through a metal enclosure like all other RF signals.

  3. #3
    ROG Guru: Grand Master Array
    Join Date
    Oct 2012

    If your antennas are outside the case like they supposed to be, there should be no issues.

  4. #4
    ROG Member Array
    Join Date
    Feb 2017

    Thank-you! I thought that device was for router connectivity.
    I connected the antenna and the bluetooth signal from the motherboard is now coming through perfectly.

    Any day you learn something new is a good day!

    Thanks again.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts