Page 3 of 3 FirstFirst 1 2 3
Results 21 to 24 of 24
  1. #21
    ROG Junior Member Array
    Join Date
    Mar 2017
    Reputation
    10
    Posts
    2

    Quote Originally Posted by AdayaB View Post
    replacement motherboard finally got here, order different ram this time (corsair vengeance 32gb white led) and a backup heatsink for testing, notcua.
    Attachment 67844ATTACH=CONFIG]67845[/ATTACH]Attachment 67846
    it seems without any bios update, the motherboard is completely unstable temperature wise. after updating to 0701, temperature dropped to 36c~ on air right now. currently doing a full memtest/stress test to ensure durability. going to attempt to reinstall the water loop system, someone told me the pump simply may not be strong enough to circulate the water well, which could be causing problems. the loop is a standard in>out>in>out>in>out configuration.

    only other problem, I'm guessing due to the PCI-E riser, the TDP of the Radeon RX Vega 64 is too much, causing the monitor to dim out when under load. this does not happen with the monitor connected to my other system running a GTX 980.

    [edit] FYI, Memory is Corsair Vengeance LED 32GB (4x8GB) DDR4 3200 (PC4-25600) C16 for DDR4 Systems - White LED PC Memory (CMU32GX4M4C3200C16) clocked @3200Mhz, Bios DIMM AB/VB Set to 1.375 to get 1.350v with 16-18-18-36 timings
    First thing I noticed looking at the first picture of this thread is your IN and OUT are reversed. That alone is your temperature problem.

  2. #22
    New ROGer Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    8

    Hrm, the instructions state that the IN is nearest to the center of the CPU and the OUT is furthest, and it actually has an IN/OUT near their holes. so doubt those are wrong. anyways still have not gotten back around to assembling the liquid cooling, i'm stilling with random shut offs. assuming it's the memory. but this is becoming a bit aggravating.

  3. #23
    New ROGer Array Xultun PC Specs
    Xultun PC Specs
    MotherboardASUS Zenith Extreme X399
    ProcessorAMD Threadripper X1950
    Memory (part number)G Skill TridentZ RGB F4-3600C17-16GTZR (64Gb)
    Graphics Card #1Nvidia Titan Xp
    Graphics Card #2Nvidia 980Ti (PCIe Disabled - Backup / Physx pig)
    Sound CardOn Board, ALO Continental Dual Mono (Tube amp/DAC)
    MonitorAcer Predator x34
    Storage #1Intel Optane 900p PCIe 480
    Storage #2Samsung SSD 850 PRO 512GB, Samsung SSD 850 PRO 128GB, 2x 2Tb WD Black
    CPU CoolerEK-Supremacy EVO Threadripper Edition - Full Nickel
    CaseCorsair 900D
    Power SupplyCorsair 1500AXi
    Keyboard Corsair LUX K70
    Mouse Corsair M65 Pro
    Headset Custom Blue mic - Mo-Fi + AntLion ModMic / Campfire Audio Vega (Music Mostly)
    OS WinDoz 10
    Network RouterASUS DSL-AC88U
    Accessory #1 EKWB 360XE 6x Vardar_ER Push-Pull, EKWB 480XE 8x Vardar_ER Push-Pull
    Accessory #2 Aquaero Pro, EK-XTOP Dual D5 PWM, 1/2" ID Tubing, XSCP Photon 270 Reservoir
    Accessory #3 EKWB TitanXp Waterblock

    Join Date
    Aug 2017
    Reputation
    10
    Posts
    2

    Quote Originally Posted by ramin_rostami View Post


    important = 2 single channel ram NOT dual ,,,, 4*dual channel ram NOT quad so you must use real 4 quad channel ram(4 ram in 1 box writen quadchannel on it ) , not 4* dual channell*
    in ryzen you must use only *dual channel , never never use 1*single channel ram , your system cant start , even start will give you tiny freeze

    example true ram for threadripper
    gskill ripjaws4 2800 4*4*

    example true ram for ryzen and all other amd
    geil evo x 3200 2*8
    or
    gskill RGB trident z 3200 2*8

    NOTE=true slot ??? in AMD you must put ram in exact slot , according your motherboard user manual , so before put ram on ramslot see your mobo true ram slot (wrong slot can make system cant start or crash )


    in amd ram is very very very sensetive ,but if you use no1 best ram, you never see even 1 freeze,bluescreen or freeze hang in 1 year !!
    Nothing wrong with using 2x dual kits just make sure S/N are sequential if your going to do that and Trident Z just require the user to set the timings correctly for Ryzen manually. Zero memcheck errors running 64Gb 3200 16-16-16-38 from day 1 of build.

  4. #24
    New ROGer Array
    Join Date
    May 2016
    Reputation
    10
    Posts
    6

    my x1950x struggles to get 70 fps anywhere, runs hot ek360 kit, 1080gpu

    Quote Originally Posted by AdayaB View Post
    Firstly, after almost 7 years, decided to go head in on a full blown new build to replace my

    Core-I7-950
    EVGA X58 Classified 3
    EVGA NVIDIA GeForce GTX 980
    G.Skill 24GB DDR3-1833MHz
    12TB of HDD Space
    Dual 28" ASUS 3D 144Hz, 4K Monitors
    1000W Thermaltake PSU Gold Rated

    for

    AMD ThreadRipper 1950X
    ASUS ROG Zenith Extreme X399
    MSI AMD Radeon RX Vega 64
    G.Skill 32GB DDR4-3200Mhz
    2x1TB Samsung 960 PRO NVMe
    Single 49" Samsung CHG90 144Hz QLED
    Seasonic 1000W Titanium PSU

    and this new AMD has been a complete f!@#ing disaster, a disappointment and money not well spent. So from the start, originally had order a Corsair H115I AIO Cooler for the CPU and G.Skill TridentZ RGB Memory, the memory would not post under any configuration, and i do mean any, from single slot tries in every slot to different dimms placed in various MB spec orders. So sent the TridentZ back (ruined my RGB theme) for G.Skill HyperX memory which was suppose to be compatible with Ryzen chips. well yeh, got it to post after reversing how the slot was configured, but not to the MB Specifications.

    Before I get into the wealth of issues with the HyperX memory, when the system post, the tempature was insane on the CPU 63-71C, did everything trying to see if maybe the CPU install was bad, nope everything looks proper, than thought maybe the H115I was bad, so sent that back for a refund, and went with an EKWB Water Cooling solution. Hrm...Nope, system still booting with 63C~ Okay, so run through the OS install process, thinking maybe the cpu-monitor is just wonky etc, install steam with some games, launch 3dmark, BAM! system shutdowns with the LED on the MB stating CPU Temp etc. Okay

    Booted back in, downloaded the latest bios 0503, oh hey the CPU temp dropped to something reasonable 32C~-43C, but notice the s#$! sparaticuly jumps around in all types of temparture ranges...weird, but more stable before, attempt to set the memory to correct timing from auto etc, 14-14-14-34-3200Mhz DOCP, boot back into OS, seems okay, input devices are wonky. crank into my favorite game (Dota 2), within 5m, my system shutdowns, repeat this everytime.

    Now mind you, this buld is in the $6500~ range, and I am beyond mad and pissed off with this. Right now, every indication of problems point to this motherboard. I am in complete utter disgust, that paying $549 for an ASUS ROG Zenith Extreme has been my bane for this entire project. right now I have a $6500~ unusable piece of crap because my tempartures are wonky and memory is just not function properly.

    Is this just a one off extreme issue with power capacitors or is this even more wide spread?
    7th day into my 1950x build- so disappointing. struggles to get 70fps in gtV, witcher3, pubg, battlefront with msi gaming x 1080. Your connection to radiator looks badly twisted- you need to redo it. I put temperature connections to measure temp on water in & out of rad- get 43 to 48 C degrees with an ek360 kit. Had a lot of difficult getting all 3 screws to tighten down w click sound until I watched a video here with 1/4 turn trick. I get 70fps, Pauls harware gets 120ish in gtV using my same zenith,1950x,gskill 14 14 14 34 32GB memory with 801 bios- no clue why. CPU fan keeps runing slow/ fast pattern( pump has its own connector.) have to stop corsair RGB ($200 dollars wasted on commander pro& required added stuffyou must buy) al suite from running in task manager which causes stutter, lag. Last straw is to spend $769 on msi 1080ti since Ive aldreay spent so much on this amd 1950x mess. Too bad 8700 intel stuff was not out when I started this build weeks ago. Intel lowered the 7900 to $1000 7 days afyer I bought 1950x. jay & linus did x1950 build but did not so far give bios setting & no game fps. EK kit $400 cpu/zenith mobo $1550, 32GB mem $416, seasonic titanium psupply $140, Corsair crap comander pro $200ish(should have got aquaero), corsair rgb fans 5 fans $140. My 5820 build puts this 1950x build to shame. no amd for me ever again, should have known better from my fx8350 days vs my intel 3820 & 5820 runs everything days. buyer beware. Maybe some day 1950x will run ok- I suspect bad bios problems( too new), & software / equipment problems that dont run well with 1950x cpu & zenith mobo.

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •