Page 14 of 31 FirstFirst ... 4 12 13 14 15 16 24 ... LastLast
Results 131 to 140 of 310
  1. #131
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,858

    Quote Originally Posted by Brighttail View Post
    As I said before I put mine on the CPU header and my PWM d5 vario has full control over the speed from 40-100%, and I don't have to choose ignore. I like it on the CPU header cause i'll get a huge BEEEEEEEEEEEEEEEEEEEEEEEP if it stops.
    Just a little contradictory bro. There is no D5 Vario PWM. Vario is voltage controlled with the pot in the back where you can adjust RPMs unless you have a high current voltage only fan controller. PWM has 12V all the time and you Vary the duty cycle.

    You can use the fan headers to do it anyway you want.

    Ive never been happy with the fan expert and its erratic behavior. I use the Aquaero 6 pro

    With this I have 4 PWM outputs.
    1) to 8 way spliter for bottom rad fans
    2) to 8 way spliter for top rad fans
    3) to 4 way spliter for front case fans and rear fan
    4) to 4 way spliter for D5 pumps

    Both sets of rad fans are on a controller that uses a temp probe that is on the loop measuring liquid temp
    Pumps are on a different controller that also uses liquid temp. Different controller its a different profile. The pumps are 5000RPM max where the fans top out at 2200. Pumps I have set for min of 40% where the fans are at 15%. They both have different ramps as well.

    The front case fans controller runs off of a probe in the front of the case near the mobo

    The Aquaero controller has a tach output to feed to the CPU header.

    I never use the CPU as a source because the diode temps are all over the place. ramps up and down non stop.

    Click image for larger version. 

Name:	controllers.jpg 
Views:	8 
Size:	284.4 KB 
ID:	68225


    Click image for larger version. 

Name:	aqua gadget.png 
Views:	4 
Size:	300.9 KB 
ID:	68226

    Click image for larger version. 

Name:	IMG_3510.jpg 
Views:	4 
Size:	147.4 KB 
ID:	68227


    Click image for larger version. 

Name:	IMG_3509.jpg 
Views:	4 
Size:	129.1 KB 
ID:	68228

    Click image for larger version. 

Name:	IMG_3511.jpg 
Views:	3 
Size:	122.8 KB 
ID:	68229


    Click image for larger version. 

Name:	IMG_3512.jpg 
Views:	3 
Size:	167.4 KB 
ID:	68230

    Click image for larger version. 

Name:	IMG_3513.jpg 
Views:	2 
Size:	173.9 KB 
ID:	68231


    In the end a controller that lets me set it exactly how I want and use whatever I want as a reference. It even has an LED output that lights up orange if my CPU passes 75C Then red at 90C.

    Yeah the flowrate is showing zero. Waiting on an extension to get from the flowmeter to the controller.That totally customizable and buildable gadget I made from scratch is part of the software and it resides on the top right of my desktop
    Last edited by JustinThyme; 10-21-2017 at 02:24 AM.

  2. #132
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,858

    Did some more cable management and removed one of the RGB strips to tone it down a bit. Looking much better. Think Im going to replace the fan at the rear with a plain no lights fan, The red is taking away from the RGB on the I/O shield.

    Click image for larger version. 

Name:	IMG_3507.jpg 
Views:	15 
Size:	349.1 KB 
ID:	68233
    Last edited by JustinThyme; 10-21-2017 at 03:25 AM.

  3. #133
    ROG Guru: Brown Belt Array Brighttail PC Specs
    Brighttail PC Specs
    Laptop (Model)Asus G751JT
    MotherboardAsus x299 Rampage VI Extreme
    ProcessorIntel i9-7900x
    Memory (part number)Corsair Dominator Platinum SE 3200Mhz 4x8
    Graphics Card #1MSI GTX 1080TI
    MonitorAcer XB321HK (4k,IPS,G-sync)
    Storage #1Intel 900p (Boot) 2xSM961 (RAID 0) Games
    Storage #2Samsung 850 Pro 512GB - WD Black 4TB
    CPU CoolerCustom Water Cool
    CasePhanteks Enthoo Elite
    Power SupplyCorsair AX 1200i
    Keyboard Corsair Platinum 95
    Mouse Asus SPATHA
    Mouse Pad Corsair MM800
    Headset/Speakers Kanyo Y5
    OS Windows 10 64 bit
    Accessory #1 2 x Alphacool Full Copper Radiator 420mm/280mm
    Accessory #2 Monsoon MMRS reservoir w/ 2 x D5 Vario Pump
    Accessory #3 Monsoon Free Center Compression Fittings

    Join Date
    Sep 2014
    Reputation
    33
    Posts
    1,332

    I don't know what to say about my pump then. It maxes at 4700 and as long as the temps are below 55C it doesn't move. At 50% my fan will start to ramp up, but on the x99 5930k i RARELY go over 60C on the CPU. Like you I like having more fans to run them all at a lower RPM for less noise. In the end I'll probably have 10 or so fans bringing intake air in an 6-7 fans taking it out. Speaking of which i gotta go down stairs and do some tests on my fans to make sure they are working fine. I think between the two phanteks fan hubs which will take fans for both 420mm fans and the Asus Fan extender taking control of the 280mm fan, that just leaves a few strays I need to find a spot for. I test out the Waterppump header and of cousre the CPU header as well. Personally I like running my pump for idle stuff at 60%.
    Panteks Enthoo Elite / Asus x299 Rampage VI Extreme / Intel I9-7900X / Corsair Dominator Platinum SE 4x8 3200MHz
    MSI GTX 1080 TI / 2x Intel 900p in a bootable VROC RAID 0 / Samsung 960 Pro 512GB
    Samsung 850 PRO 512GB / Western Digital Gold 8TB HD
    Corsair AX 1200i / Corsair Platinum K95 / Asus Spatha
    Acer XB321HK 4k, IPS, G-sync Monitor / Water Cooled / Asus G571JT Laptop

  4. #134
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,858

    If your pump has a molex power lead and an additional PWM lead then its a PWM pump. If it has only the molex lead it could be a D5 vario or D5 Standard. The Vario has a red pot on the back of the pump where you can manually adjust the speed, the standard does not.

    I run my pumps for idle/minimal workloads where they are the quietest about 65%. Anything lower they actually get louder and higher they slowly get a high pitched whine. For whatever reasson they are nice and quiet in this case. I didn't screw them down. The feet for the mount is sitting on 3/8" high density foam with sticky on both sides.

  5. #135
    ROG Guru: White Belt Array Darren Stevens PC Specs
    Darren Stevens PC Specs
    MotherboardASUS ROG Rampage VI Extreme
    ProcessorIntel Core i9 7980XE
    Memory (part number)G.Skill Trident Z RGB F4-3200C16Q-32GTZR 32GB (4x8GB) DDR4
    Graphics Card #1ASUS ROG Poseidon GeForce GTX 1080 Ti Platinum 11GB
    Graphics Card #2ASUS ROG Poseidon GeForce GTX 1080 Ti Platinum 11GB
    MonitorASUS PG348Q ROG Swift 34in 100Hz G-Sync IPS Gaming Monitor
    Storage #1Samsung 960 Pro 512GB NVMe M.2 SSD
    Storage #2Samsung 960 Pro 512GB NVMe M.2 SSD
    CPU CoolerEK-FB ASUS ROG R6E RGB Monoblock - Nickel
    CasePhanteks Enthoo Elite Satin Black
    Power SupplyCorsair AX1500i Digital ATX Modular
    Keyboard ASUS ROG GK2000 Horus RGB Mechanical Gaming Keyboard
    Mouse ASUS ROG Spatha Wireless Laser Gaming Mouse
    Headset ASUS ROG Cerberus Gaming Headset
    Mouse Pad ASUS ROG Sheath Gaming Surface
    Headset/Speakers ASUS ROG Centurion True 7.1 Gaming Headset
    OS Windows 10 Pro 64 bit UEFI Install
    Network RouterASUS ROG Rapture GT-AC5300 Wireless Triband Router
    Accessory #1 Samsung 960 Pro 512GB NVMe M.2 SSD
    Accessory #2 ASUS ROG SLI HB Bridge - 4 Slot
    Darren Stevens's Avatar
    Join Date
    Sep 2015
    Reputation
    13
    Posts
    109

    Quote Originally Posted by JustinThyme View Post
    Did some more cable management and removed one of the RGB strips to tone it down a bit. Looking much better. Think Im going to replace the fan at the rear with a plain no lights fan, The red is taking away from the RGB on the I/O shield.

    Click image for larger version. 

Name:	IMG_3507.jpg 
Views:	15 
Size:	349.1 KB 
ID:	68233
    Looks awesome **

  6. #136
    ROG Guru: White Belt Array smithkid PC Specs
    smithkid PC Specs
    Laptop (Model)Surface Pro 3
    MotherboardROG Rampage VI Extreme
    Processor7900X
    Memory (part number)F4-3200C16Q-32GTZR
    Graphics Card #1Asus ROG GTX 1080 STRIX O8G
    Graphics Card #2Asus ROG GTX 1080 STRIX O8G
    Monitor7 various
    Storage #1Samsung 960 Pro 1TB
    Storage #2WD 1TB Blue M.2 SSD
    CPU CoolerAquacomputer NEXT cuplex kryos vision cu/cu
    CaseLianli PC-T70FX includes T70-1
    Power SupplyCorsair HX1200i
    Keyboard FILCO Majestouch Convertible 2 BT/USB 104 Key - Cherry Brown
    Mouse Logitech MX Master
    Headset/Speakers Mackie
    OS W10
    Network RouterTP-Link ER-5120
    smithkid's Avatar
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    97

    LianLI PC-T70FX with water block & 2 GPU's

    Best case I have ever owned and I have had a few, over 20 I guess.

    Click image for larger version. 

Name:	20171021_183541.jpg 
Views:	11 
Size:	493.3 KB 
ID:	68241

    Click image for larger version. 

Name:	20171021_183600.jpg 
Views:	6 
Size:	554.4 KB 
ID:	68243
    Last edited by smithkid; 10-21-2017 at 08:54 AM.

  7. #137
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,858

    Always liked most LL rigs just for the modular concept, just not the cost for that concept. Last one I did (shell is still sitting in my basement as I cant bring myself to toss out that much $$) was a cube. 100 different things to put in drive bays, 200 things to put in the rest. Problem was mostly cost. $100 to add a HDD module with a single fan that takes up 3 drive bays. To put a 360 rad in the front it took buying 3 of those then hacking them up to get the rad in.

  8. #138
    ROG Guru: Brown Belt Array Brighttail PC Specs
    Brighttail PC Specs
    Laptop (Model)Asus G751JT
    MotherboardAsus x299 Rampage VI Extreme
    ProcessorIntel i9-7900x
    Memory (part number)Corsair Dominator Platinum SE 3200Mhz 4x8
    Graphics Card #1MSI GTX 1080TI
    MonitorAcer XB321HK (4k,IPS,G-sync)
    Storage #1Intel 900p (Boot) 2xSM961 (RAID 0) Games
    Storage #2Samsung 850 Pro 512GB - WD Black 4TB
    CPU CoolerCustom Water Cool
    CasePhanteks Enthoo Elite
    Power SupplyCorsair AX 1200i
    Keyboard Corsair Platinum 95
    Mouse Asus SPATHA
    Mouse Pad Corsair MM800
    Headset/Speakers Kanyo Y5
    OS Windows 10 64 bit
    Accessory #1 2 x Alphacool Full Copper Radiator 420mm/280mm
    Accessory #2 Monsoon MMRS reservoir w/ 2 x D5 Vario Pump
    Accessory #3 Monsoon Free Center Compression Fittings

    Join Date
    Sep 2014
    Reputation
    33
    Posts
    1,332

    So a big WHEW out of the way. I was having some issues on how I was going to mount my reservoirs and so I made some purchases of mounting adapters for my monsoon reservoir and the EK reservoir. I was able to put the mounts side by side so at least the reservoirs will fit. They will not be of the same size/colour but that is by design. I want to see which looks better in my build and when I put it all together I will see that and then get another reservoir of the type that I like best. Swapping them out is actually very easy, just unhook the tubing and pull out the backside bracket, put on the new one, re-insert the tubing. I might have to make slight tubing changes but it is all good. I know it can work. BTW i had to take the case out of the flight case to get to the accessory boxes and DAMN is it heavy and HUGE!

    Right off the bat I can say that I'm a little weary of how the EK reservoir/pump is not secured on the top end and only the bottom. The design looks like it will muffle the pump a bit more and cut down on vibrations over the Monsoon MMRS. They both have different looks. The EK is more slender and less busy while the Monsoon has the flashy rods and pump cover that can be appealing.

    I have to say I really like the ease of how I can swap out a reservoir/pump, radiator, ect in this case by just sliding in and out a bracket.

    I also went through my box of static pressure fans. It looks like I'm going to need another 5-7 fans so I cleaned them up and plugged them in to test that they are in working conditions and have no vibrations, odd wobbles or sound.

    I know it seems like very slow going but I'm determined to take this build slow, enjoy it and get it done right. So when it comes time to do things like a reservoir swap it is simple, easy and my down time is VERY limited.
    Panteks Enthoo Elite / Asus x299 Rampage VI Extreme / Intel I9-7900X / Corsair Dominator Platinum SE 4x8 3200MHz
    MSI GTX 1080 TI / 2x Intel 900p in a bootable VROC RAID 0 / Samsung 960 Pro 512GB
    Samsung 850 PRO 512GB / Western Digital Gold 8TB HD
    Corsair AX 1200i / Corsair Platinum K95 / Asus Spatha
    Acer XB321HK 4k, IPS, G-sync Monitor / Water Cooled / Asus G571JT Laptop

  9. #139
    ROG Guru: Brown Belt Array Brighttail PC Specs
    Brighttail PC Specs
    Laptop (Model)Asus G751JT
    MotherboardAsus x299 Rampage VI Extreme
    ProcessorIntel i9-7900x
    Memory (part number)Corsair Dominator Platinum SE 3200Mhz 4x8
    Graphics Card #1MSI GTX 1080TI
    MonitorAcer XB321HK (4k,IPS,G-sync)
    Storage #1Intel 900p (Boot) 2xSM961 (RAID 0) Games
    Storage #2Samsung 850 Pro 512GB - WD Black 4TB
    CPU CoolerCustom Water Cool
    CasePhanteks Enthoo Elite
    Power SupplyCorsair AX 1200i
    Keyboard Corsair Platinum 95
    Mouse Asus SPATHA
    Mouse Pad Corsair MM800
    Headset/Speakers Kanyo Y5
    OS Windows 10 64 bit
    Accessory #1 2 x Alphacool Full Copper Radiator 420mm/280mm
    Accessory #2 Monsoon MMRS reservoir w/ 2 x D5 Vario Pump
    Accessory #3 Monsoon Free Center Compression Fittings

    Join Date
    Sep 2014
    Reputation
    33
    Posts
    1,332

    ******EDIT***** I bit the bullet and purchased most of my parts for the Monsoon MMRS reservoir off of Performance PC and the other 3 parts off of Amazon.com. It sucks but I have waasted enough time.

    Click image for larger version. 

Name:	dominator 5.jpg 
Views:	4 
Size:	166.6 KB 
ID:	68272

    The problem, of course is if I decide I want to change the colour of the build. Getting extenders for cables is not a big deal, nor is changing the fluid. The fans tho can get costly. The little kid in me is really liking those new Corsair double RGB LED fans, capable of changing colours at will or even turning them off. The adult in me is saying they are like $45 each, would require Corsair Link which doesn't get along with other Asus programs and are completely unnecessary as if I want to change lighting in the case I can do so with LED strips. So they are pretty much out.

    Overall the five fans that come with the Phanteks elite are very nice fans with no LEDs and I have 5 others from my Enthoo primo. While not the elite fans they are still designed for static pressure but aren't PWM. I figure with these I could put four of them on my 280mm radiator and control it through the included fan hub. Sigh so many decisions.

    The good news is the radiator brackets slide in and out very easily and even if I have all the tubing up and filled, changing the fans isn't a huge deal except for the fans on the bottom of the bottom radiator, but then those would be non-led so not an issue. The premium Phanteks fans have a 1.62 static pressure rating and while my Corsair ML fans can go up to 3.0 at full ramp up but at 700-1000RPM would be about the same. So all these fans are fairly interchangeable when it comes to noise and static pressure. I think between the Corsair ML fans and the Phantek's elite fans, I have enough fans to cover the case, it will be a matter of whether I want the LEDS showing or not.

    I seriously have forgotten all the stuff that goes into building a new computer. I wish I had more faith in the Aura program, then I would just some of the Phanteks RGB strips but looking at the latest Aura threads in the forums there are just too many issues once you start adding more and more things. The Motherboard and single RGB strip for the monoblock SHOULD be easily doable but the moment you start adding more LED strips, DRAM and other items. Boom.

    Sorry for the ramble, just working out some things while I wait for Performance PC to get more stock!
    Last edited by Brighttail; 10-23-2017 at 02:55 AM.
    Panteks Enthoo Elite / Asus x299 Rampage VI Extreme / Intel I9-7900X / Corsair Dominator Platinum SE 4x8 3200MHz
    MSI GTX 1080 TI / 2x Intel 900p in a bootable VROC RAID 0 / Samsung 960 Pro 512GB
    Samsung 850 PRO 512GB / Western Digital Gold 8TB HD
    Corsair AX 1200i / Corsair Platinum K95 / Asus Spatha
    Acer XB321HK 4k, IPS, G-sync Monitor / Water Cooled / Asus G571JT Laptop

  10. #140
    ROG Guru: Brown Belt Array Brighttail PC Specs
    Brighttail PC Specs
    Laptop (Model)Asus G751JT
    MotherboardAsus x299 Rampage VI Extreme
    ProcessorIntel i9-7900x
    Memory (part number)Corsair Dominator Platinum SE 3200Mhz 4x8
    Graphics Card #1MSI GTX 1080TI
    MonitorAcer XB321HK (4k,IPS,G-sync)
    Storage #1Intel 900p (Boot) 2xSM961 (RAID 0) Games
    Storage #2Samsung 850 Pro 512GB - WD Black 4TB
    CPU CoolerCustom Water Cool
    CasePhanteks Enthoo Elite
    Power SupplyCorsair AX 1200i
    Keyboard Corsair Platinum 95
    Mouse Asus SPATHA
    Mouse Pad Corsair MM800
    Headset/Speakers Kanyo Y5
    OS Windows 10 64 bit
    Accessory #1 2 x Alphacool Full Copper Radiator 420mm/280mm
    Accessory #2 Monsoon MMRS reservoir w/ 2 x D5 Vario Pump
    Accessory #3 Monsoon Free Center Compression Fittings

    Join Date
    Sep 2014
    Reputation
    33
    Posts
    1,332

    Quote Originally Posted by JustinThyme View Post
    Just a little contradictory bro. There is no D5 Vario PWM. Vario is voltage controlled with the pot in the back where you can adjust RPMs unless you have a high current voltage only fan controller. PWM has 12V all the time and you Vary the duty cycle.

    You can use the fan headers to do it anyway you want.
    You are right i got the
    EK-D5 PWM Motor (12V DC) Pump which was on sale for 20% off. So a Laing D5 PWM. I need to figure out what headers to put them on as i don't want them running at 100% all the time.


    BTW: anyone using the Fan extender card? Last time even if you put PWM fans on it, you still had to set it DC in the BIOS or it didn't work properly.

    Question for Justin... how do you KNOW you are running your m.2s using VROC? You got a RAID card or Hyper x16? or just using the Intel drives? My Hyper x16 is on the way and i will be getting two more sm961s to fill the card out. Then we'll see what i can do!
    Last edited by Brighttail; 10-23-2017 at 03:03 AM.
    Panteks Enthoo Elite / Asus x299 Rampage VI Extreme / Intel I9-7900X / Corsair Dominator Platinum SE 4x8 3200MHz
    MSI GTX 1080 TI / 2x Intel 900p in a bootable VROC RAID 0 / Samsung 960 Pro 512GB
    Samsung 850 PRO 512GB / Western Digital Gold 8TB HD
    Corsair AX 1200i / Corsair Platinum K95 / Asus Spatha
    Acer XB321HK 4k, IPS, G-sync Monitor / Water Cooled / Asus G571JT Laptop

Page 14 of 31 FirstFirst ... 4 12 13 14 15 16 24 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •