Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Results OC 6700k Hero VIII

Asgar
Level 7

‎09-21-2017 02:17 PM - last edited on ‎03-05-2024 09:57 PM by Community Admin

Hi all guys,

I would ask for some help. Recently, I have finally decided to make OC to my 6700k. It is the first time I do it, I followed several guides but I'm not very sure of the final result... Let's start with my "machine":

- 6700K with EVGA CLC 280
- Maximus Hero VIII
- Trident Z 3200 CL16
- EVGA 1070 FTW2
- Enermax Revolution X´t 730 +G
- Win 10 64

My goal was to try to get 4.6 stable in less than 1.35, I started testing for 1.31, but Prime 95 it gives me an error in blend anf FTT large in first minutes. Actually, in 1.33 have a error in minute 26 of blend test. I have been reading that this is a very frequent failure with my configuration and this has made me doubt the reliability of Prime 95. I have run Aida64 for an hour without problems, and now I have decided to try with realbench. These are my results, what do you think?

67573

Thanks for the help!
Labels:
0 Kudos
2,384 Views
3 REPLIES 3

tommiboi
Level 7

‎09-22-2017 01:09 AM

Sorry for me the info you provided is not clear. Is it running at 4k now ? Also please tell us what cooler you are using because you arelady run hot.
Try more, Try harder, Try and previal
0 Kudos

Asgar
Level 7
In response to tommiboi

‎09-22-2017 02:03 AM

tommiboi wrote:
Sorry for me the info you provided is not clear. Is it running at 4k now ? Also please tell us what cooler you are using because you arelady run hot.


Thanks for answering. Mi cooler is a EVGA CLC 280 and the resolution selected is 2560x1080
0 Kudos

xPepi
Level 7

‎09-23-2017 04:08 AM

List all your bios settings, you can copy them into a document onto a usb in bios...then delete the crap we don't need to look at and we'll go from there...here's an example of mine...I deleted most of the settings, otherwise it's a huge notepad file...but I believe the ones you're going to tweak are all below...you can see I'm doing a 45x @ 1.22 vcore

[2017/06/23 11:36:43]
Ai Overclock Tuner [XMP]
XMP [XMP DDR4-3000 15-17-17-35-1.35V]
BCLK Frequency [100.0000]
ASUS MultiCore Enhancement [Disabled]
CPU Core Ratio [Per Core]
1-Core Ratio Limit [45]
2-Core Ratio Limit [45]
3-Core Ratio Limit [45]
4-Core Ratio Limit [45]
BCLK Frequency : DRAM Frequency Ratio [Auto]
DRAM Odd Ratio Mode [Enabled]
DRAM Frequency [DDR4-3000MHz]
Xtreme Tweaking [Disabled]
TPU [Keep Current Settings]
EPU Power Saving Mode [Disabled]
CPU SVID Support [Auto]
CPU Core/Cache Current Limit Max. [255.00]
Min. CPU Cache Ratio [45]
Max CPU Cache Ratio [45]
CPU Core/Cache Voltage [Adaptive Mode]
- Offset Mode Sign [+]
- Additional Turbo Mode CPU Core Voltage [1.220]
- Offset Voltage [0.010]
DRAM Voltage [1.3500]
CPU VCCIO Voltage [1.00000]
CPU System Agent Voltage [1.00000]
PCH Core Voltage [Auto]
CPU Standby Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
FCLK Frequency for Early Power On [Auto]
Initial BCLK Frequency [Auto]
BCLK Amplitude [Auto]
BCLK Slew Rate [Auto]
BCLK Spread Spectrum [Auto]
BCLK Frequency Slew Rate [Auto]
DRAM VTT Voltage [Auto]
VPPDDR Voltage [Auto]
DMI Voltage [Auto]
Core PLL Voltage [Auto]
Internal PLL Voltage [Auto]
PLL Bandwidth [Auto]
DRAM Eventual Voltage [Auto]
Eventual CPU Standby Voltage [Auto]
Eventual DMI Voltage [Auto]
Maximus Tweak [Auto]
VRM Spread Spectrum [Disabled]
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
CPU C-states [Enabled]
Enhanced C-states [Enabled]
CPU C3 Report [Enabled]
CPU C6 Report [Enabled]
CPU C7 Report [CPU C7s]
CPU C8 Report [Enabled]
Package C State Limit [Auto]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Above 4G Decoding [Disabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Enabled]
Setup Mode [Advanced Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E/PCI Expansion Devices [Legacy only]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name []
Save to Profile [1]
CPU Core Voltage [Auto]
VCCSA Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
Cache Ratio [Auto]
Bus Interface [PCIEX16/X8_1]
0 Kudos