09-30-2017 05:03 AM - last edited on 03-06-2024 08:00 PM by ROGBot
10-01-2017 02:54 AM
elmor wrote:
It's for factory BIOS flashing.
10-14-2017 09:04 PM
10-14-2017 10:50 PM
lightknightrr wrote:
Now, someone figure out how it works. Probably better than using a test clip.
10-15-2017 04:32 AM
lightknightrr wrote:
Now, someone figure out how it works. Probably better than using a test clip.
10-15-2017 08:57 AM
elmor wrote:
Pin#1 - NC
Pin#2 - WP#
Pin#3 - VCC
Pin#4 - GND
Pin#5 - CS#
Pin#6 - CLK
Pin#7 - MISO
Pin#8 - MOSI
Pin#9 - HOLD#
Pin pitch 2.00mm. Note that VCC is 1.8V on AM4. Make sure standby power is off before applying external VCC. I strongly recommend using USB BIOS Flashback over external tools if available.
10-15-2017 01:49 PM
elmor wrote:
Pin#1 - NC
Pin#2 - WP#
Pin#3 - VCC
Pin#4 - GND
Pin#5 - CS#
Pin#6 - CLK
Pin#7 - MISO
Pin#8 - MOSI
Pin#9 - HOLD#
Pin pitch 2.00mm. Note that VCC is 1.8V on AM4. Make sure standby power is off before applying external VCC. I strongly recommend using USB BIOS Flashback over external tools if available.
10-26-2017 11:11 AM
elmor wrote:
Pin#1 - NC
Pin#2 - WP#
Pin#3 - VCC
Pin#4 - GND
Pin#5 - CS#
Pin#6 - CLK
Pin#7 - MISO
Pin#8 - MOSI
Pin#9 - HOLD#
Pin pitch 2.00mm. Note that VCC is 1.8V on AM4. Make sure standby power is off before applying external VCC. I strongly recommend using USB BIOS Flashback over external tools if available.