Can Aura configure the lighting of Corsair products?

[AkaNe0]

Can't say I hoped we would get a beta version and certaintly not this fast. Im happy .
Did some quick testing, most of it seems to work fine.

2 problems I found are:
when on "breating" RAM LED's are tuned off and don't work.
when on "color cycle" RAM stays in it's last color and doesn't cycle.

Due to some technical specifications of the Corsair memory kit, the breathing and color cycle do not work in AURA.

Hey guys, sorry to bother but, at what speed are you running your CMR16GX4M2C3000C15 on the Mobo ROG B350-F ? As this memory is not listed on the QVL im worried it will not run at full speed. At least I would like it to run at 2933Mhz

For Memory compatibility issues you might want to create a topic directly in the Motherboards Z370 sub-section.

Using Corsair CMR16GX4M2C3600C18 and it appears to work fine with this software. Haven’t been able to fully test it yet as there is compatibility issues with my ASUS mboards and software.

Thanks for trying out the beta version. The issue will be fix in the new release of AURA.

[Fred7010]

I've been keeping my eye on this thread for a while and have also been trying out the beta build. Thank you for pushing this build for us!

The main issue I have found is that the corsair memory LEDs do not turn off when my PC enters sleep mode when "OFF" in the shut down settings is selected.
The LEDs on my Asus Z720-E MB and Strix GTX 1080 GPU both turn off as expected, but the RAM unfortunately stays lit.
My RAM Is the CMR16GX4M2C3000C15 kit.

Most of the other effects seem to work fine apart from breathing and colour cycle thanks to a hardware limitation, as mentioned.
However, shouldn't colour cycle be possible to implement?
The colour cycle mode in the Rainbow tab works as expected and is visually quite similar in that it cycles between the colours.

It'd also be great to have the option to control two or more sticks of RAM as one item in the rainbow sequence rather than have each stick act individually, but that's not really an issue with the AURA software itself.

[GEEKCPA]

It would be nice if Aura would allow you to exclude detected items from its control. I'm just starting my build so not even close to starting it up, but I have the Corsair Vengeance 64GB kit CMR64GX4M8X3600C18 and have (so far) 4 LL140 and 3 LL120 Corsair fans. I also have the Corsair Commander and was planning on controlling at least the fans with that. If Aura can control the RAM reliably I'll be happy to let the MB control it. My RGB water pump/reservoir (Enermax) supposedly can have its RGB controlled by Aura, but the Thermaltake RGB hard tube fittings are only 256 colors and require their own controller. I may be in for an interesting process...

[AlexGS]

Hey guys,

I spent several hours of installing and uninstalling and cleaning Aura versions but finally, using the Beta mentioned above, I was able to have the color cycle effect... Kind of.

After my third or fourth attempt of reinstalling the beta version, once the installation finished, instead of restarting the PC, I selected to restart later, then everything blinked and all of a sudden, everything was on a color cycle, even my Corsair RAM (CMR16GX4M2C3000C15). Later on I decided to restart the system to see if the color cycle was there ... and it was!. It's worth to mention that at this point, I didn't open Aura SW at all, it was like the default option.

Then I decided to test it on Aura, and as soon as I hit Color Cycle, the RAM stopped working :P ...

Anyway, just wanted to share this with you, maybe for someone that is looking exactly for the color cycle, this may be helpful ... Also I could recommend the Raindow effect, which using it with the fastest speed, it looks 99% as the color cycle effect :P

[AkaNe0]

Hey guys,

I spent several hours of installing and uninstalling and cleaning Aura versions but finally, using the Beta mentioned above, I was able to have the color cycle effect... Kind of.

After my third or fourth attempt of reinstalling the beta version, once the installation finished, instead of restarting the PC, I selected to restart later, then everything blinked and all of a sudden, everything was on a color cycle, even my Corsair RAM (CMR16GX4M2C3000C15). Later on I decided to restart the system to see if the color cycle was there ... and it was!. It's worth to mention that at this point, I didn't open Aura SW at all, it was like the default option.

Then I decided to test it on Aura, and as soon as I hit Color Cycle, the RAM stopped working :P ...

Anyway, just wanted to share this with you, maybe for someone that is looking exactly for the color cycle, this may be helpful ... Also I could recommend the Raindow effect, which using it with the fastest speed, it looks 99% as the color cycle effect :P

Thanks for your experience sharing. I confirm that the Corsair memory kit 2x8GB will be working in the upcoming AURA software version and will be a more stable version than the BETA.

However, due to DRAM EC specifications, the Corsair Vengeance RGB DRAM LED’s will turn off during Breathing and Color Cycle effects. I have requested to add the option to control the DRAM by areas in static mode during those effects.

[Zougoku]

Hello to all,

I try to keep up with the updates regarding the compatibility and from 12/12 i notice that some people have solved their issues with aura version (1.05.28).
Can someone confirm that CMR16GX4M2C3000C15 is from now on compatible with aura sync and asus strix z270e motherboard ?

Thank you

[AkaNe0]

Hello to all,

I try to keep up with the updates regarding the compatibility and from 12/12 i notice that some people have solved their issues with aura version (1.05.28).
Can someone confirm that CMR16GX4M2C3000C15 is from now on compatible with aura sync and asus strix z270e motherboard ?

Thank you

The Corsair Vengeance memory kits 16GB are now compatible with AURA sync and can be controlled with AURA software.

Please note that Color Cycle and Breathing effect do not work due to Corsair EC limitation.

[Zougoku]

The Corsair Vengeance memory kits 16GB are now compatible with AURA sync and can be controlled with AURA software.

Please note that Color Cycle and Breathing effect do not work due to Corsair EC limitation.

Thank you for the update. That's unfortunate though because Color Cycle is what i was going for. Is there going to be further development to add those or is this the best we can get from it ?

[AkaNe0]

Thank you for the update. That's unfortunate though because Color Cycle is what i was going for. Is there going to be further development to add those or is this the best we can get from it ?

All will depends on Corsair for their future memory kits.