Can Aura configure the lighting of Corsair products?

[NeoPlex]

hmm ok... after installing this beta version Aura SW started recognized my RAM, but its stopped recognize my mother board!!! And what is worse, after downgrading to version .25 Aura sw is still no able to recognize my motherboard.... only VGA. How can I fix it??

I tried SW aura cleaner, older version 1.05.16 etc... but my lighting on motherboard (including connected FAN and led strip) not working at all....

[NeoPlex]

ok previous problem was fixed, just turn off PC and unplug power cable...

but then I tried again instal this beta -> Asus Aura Crashing "has stopped working"->this BETA version was cleaned from PC -> installed back version 1.05.25 aaand -> Asus Aura Crashing "has stopped working"....


so how to fix and install 1.05.25 at least in functional status as it was before this beta.

1) uninstall Aura SW
2) in BIOS turn off led lighting
3) turn off your PC + unplug power cable
4) turn on, clean rest of the Aura SW manually (C:\Program Files (x86)\ASUS\AURA) + use CCleaner to clean registry
5) reboot
6) install version 1.05.25... now Aura should be working like before

resume
BETA version works strange for me... worked only first time RAM: CMR16GX4M2C3000C15 was detected , but motherboard was not detected by Aura SW. After reinstalling BETA Aura SW stopped worked at all, even version 1.05.25 ("has stopped working") and way how bring Aura SW 1.05.25 into original functional status was very difficult.

RAM: CMR16GX4M2C3000C15
MB: 90MB0UJ0-M0EAY0
VGA: 90YV09N2-M0NA00

but yeah... we have a progress with RAM: CMR16GX4M2C3000C15...

[AkaNe0]

Now my modules reacting to AURA, but animation is very choppy on rainbow, wave, comet, starry night.
This is how it works on rainbow:

Breathing and Color Cycle doesn't activate them, they have the last used color.
Flash and dash works fine when VGA is last in sequence, but then VGA is not "flashing"
Yoyo make only one module flashing.

I see that you have 4 memory sticks. Can you tell me your system specs in detail?
Motherboard:
BIOS:
OS:
Memory:

ok previous problem was fixed, just turn off PC and unplug power cable...

but then I tried again instal this beta -> Asus Aura Crashing "has stopped working"->this BETA version was cleaned from PC -> installed back version 1.05.25 aaand -> Asus Aura Crashing "has stopped working"....


so how to fix and install 1.05.25 at least in functional status as it was before this beta.

1) uninstall Aura SW
2) in BIOS turn off led lighting
3) turn off your PC + unplug power cable
4) turn on, clean rest of the Aura SW manually (C:\Program Files (x86)\ASUS\AURA) + use CCleaner to clean registry
5) reboot
6) install version 1.05.25... now Aura should be working like before

resume
BETA version works strange for me... worked only first time RAM: CMR16GX4M2C3000C15 was detected , but motherboard was not detected by Aura SW. After reinstalling BETA Aura SW stopped worked at all, even version 1.05.25 ("has stopped working") and way how bring Aura SW 1.05.25 into original functional status was very difficult.

RAM: CMR16GX4M2C3000C15
MB: 90MB0UJ0-M0EAY0
VGA: 90YV09N2-M0NA00

but yeah... we have a progress with RAM: CMR16GX4M2C3000C15...

Firstly thanks for trying this beta version.

1. Once the 1.05.26 was installed, the LED of your motherboard wasn't working, but does in AURA the motherboard was appearing?
2. Were you able to reinstalled and launched the 1.05.25 version? Please try to redo a clean install again.

[NeoPlex]

Firstly thanks for trying this beta version.

1. Once the 1.05.26 was installed, the LED of your motherboard wasn't working, but does in AURA the motherboard was appearing?
2. Were you able to reinstalled and launched the 1.05.25 version? Please try to redo a clean install again.

No problem, I'm SW tester in real life

1)

1) clean install of 1.05.26, during restarting of system every leds was synchronized (RAM, MB + connected fan and led strip, VGA)
2) after restart I started the Aura SW, for few moments I saw all compononents detected in Aura SW (RAM, MB and VGA), but then MB stopped lighting and also MB disappeared from Aura SW (also menu/ tabs for Shut off and Synchronized disappeared. I just had only one tab is SW aura - so we can say that disappeared everything what is connected with MB setting). Until this time, after reinstallation... I was not able to launch this version 1.05.26 at all every time I got "has stopped working"


2)
YES... I was able to install 1.05.25 but not so easily. , see my process of installation above (previous post)

[AkaNe0]

No problem, I'm SW tester in real life

1)

1) clean install of 1.05.26, during restarting of system every leds was synchronized (RAM, MB + connected fan and led strip, VGA)
2) after restart I started the Aura SW, for few moments I saw all compononents detected in Aura SW (RAM, MB and VGA), but then MB stopped lighting and also MB disappeared from Aura SW (also menu/ tabs for Shut off and Synchronized disappeared. I just had only one tab is SW aura - so we can say that disappeared everything what is connected with MB setting). Until this time, after reinstallation... I was not able to launch this version 1.05.26 at all every time I got "has stopped working"


2)
YES... I was able to install 1.05.25 but not so easily. , see my process of installation above (previous post)

Alright, that's very helpful. Can you provide the full specs of your system:
MB: Strix B350-F 90MB0UJ0-M0EAY0
BIOS:
OS:
VGA: Strix GTX 1070 90YV09N2-M0NA00
Memory: Corsair 2x8GB CMR16GX4M2C3000C15
KB:
Mouse:

[NeoPlex]

Alright, that's very helpful. Can you provide the full specs of your system:

no problem

MB: Strix B350-F 90MB0UJ0-M0EAY0
BIOS: 0811
OS: Windows 10 (64) Home
VGA: Strix GTX 1070 90YV09N2-M0NA00
Memory: Corsair 2x8GB CMR16GX4M2C3000C15
KB: TESORO LOBERA TS-G5NL
Mouse: Logitech G502 Proteus Core - MG137a6d

[Ingvarr100th]

I see that you have 4 memory sticks. Can you tell me your system specs in detail?
Firstly thanks for trying this beta version.

Motherboard: Asus ROG STRIX Z270-F
BIOS: 1009
OS: Windows 10 1709 (Fall Creators Update)
Memory: 2xCMR16GX4M2C3466C16 (4 sticks - 32 GB)
ME ver.: 11.7.0.3290
MEI driver ver.: 11.7.0.1032


When RAM is detached in AURA, animation is smooth on MB and GPU. Once attached it doesn't work well.

[msvinifk]

Im lagging here on some effects. I will send a video to explain


1 or 2 effects is working good, without those lag. Well, this is the way.
Just need to fix the lagg and it will be perfect.

System Specs:

Motherboard: ROG STRIX H270F GAMING
BIOS: Latest version 0809
OS: Windows 10 64 LTSB
Memory: CMR16GX4M2A2666C16 -> 2666MHz 16GB (2x8GB)
VGA: STRIX GTX 1080ti Non OC Edition
KB: Motospeed CK108
Mouse: Motospeed V30

[ckulzer360]

I have a Strix Z270E motherboard, corsair vengeance RGB, and a Strix 1060 6gb gpu. The ram and gpu are detected by aura and work fine, but my mobois not detected by the software. I am using the beta version to allow aura to work with my ram but when i was using the current main release it was not detecting it either. if anyone knows a fix it would be greatly appreciated!

[AkaNe0]

no problem

MB: Strix B350-F 90MB0UJ0-M0EAY0
BIOS: 0811
OS: Windows 10 (64) Home
VGA: Strix GTX 1070 90YV09N2-M0NA00
Memory: Corsair 2x8GB CMR16GX4M2C3000C15
KB: TESORO LOBERA TS-G5NL
Mouse: Logitech G502 Proteus Core - MG137a6d

Thanks, spec detail added.

Motherboard: Asus ROG STRIX Z270-F
BIOS: 1009
OS: Windows 10 1709 (Fall Creators Update)
Memory: 2xCMR16GX4M2C3466C16 (4 sticks - 32 GB)
ME ver.: 11.7.0.3290
MEI driver ver.: 11.7.0.1032

When RAM is detached in AURA, animation is smooth on MB and GPU. Once attached it doesn't work well.

For Color Cycle and Breathing effect, it's "normal" those effect do not work on the Corsair memory. This is due to the technology they use that is not compatible.

However I have reported the issue for flash and dash and that unsync the memory makes the effect smoother.

Im lagging here on some effects. I will send a video to explain

1 or 2 effects is working good, without those lag. Well, this is the way.
Just need to fix the lagg and it will be perfect.

System Specs:

Motherboard: ROG STRIX H270F GAMING
BIOS: Latest version 0809
OS: Windows 10 64 LTSB
Memory: CMR16GX4M2A2666C16 -> 2666MHz 16GB (2x8GB)
VGA: STRIX GTX 1080ti Non OC Edition
KB: Motospeed CK108
Mouse: Motospeed V30

Thanks for the video. Can you tell me exactly which effects have the lags? We've already noted that the wave effect need to be adjusted.