Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 21 to 30 of 49
  1. #21
    ROG Member Array
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    17

    hmm ok... after installing this beta version Aura SW started recognized my RAM, but its stopped recognize my mother board!!! And what is worse, after downgrading to version .25 Aura sw is still no able to recognize my motherboard.... only VGA. How can I fix it??

    I tried SW aura cleaner, older version 1.05.16 etc... but my lighting on motherboard (including connected FAN and led strip) not working at all....

  2. #22
    ROG Member Array
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    17

    ok previous problem was fixed, just turn off PC and unplug power cable...

    but then I tried again instal this beta -> Asus Aura Crashing "has stopped working"->this BETA version was cleaned from PC -> installed back version 1.05.25 aaand -> Asus Aura Crashing "has stopped working"....


    so how to fix and install 1.05.25 at least in functional status as it was before this beta.

    1) uninstall Aura SW
    2) in BIOS turn off led lighting
    3) turn off your PC + unplug power cable
    4) turn on, clean rest of the Aura SW manually (C:\Program Files (x86)\ASUS\AURA) + use CCleaner to clean registry
    5) reboot
    6) install version 1.05.25... now Aura should be working like before

    resume
    BETA version works strange for me... worked only first time RAM: CMR16GX4M2C3000C15 was detected , but motherboard was not detected by Aura SW. After reinstalling BETA Aura SW stopped worked at all, even version 1.05.25 ("has stopped working") and way how bring Aura SW 1.05.25 into original functional status was very difficult.

    RAM: CMR16GX4M2C3000C15
    MB: 90MB0UJ0-M0EAY0
    VGA: 90YV09N2-M0NA00

    but yeah... we have a progress with RAM: CMR16GX4M2C3000C15...
    Last edited by NeoPlex; 10-25-2017 at 07:46 PM.

  3. #23
    ROG Guru: Green Belt Array AkaNe0 PC Specs
    AkaNe0 PC Specs
    MotherboardMaximus X Formula
    Processori7-8700K
    Memory (part number)G.skill Trident-Z RGB
    Graphics Card #1Strix GTX 1080 Ti
    CaseOpenBenchtable
    Power SupplySeasonic PRIME Platinum 1000W
    Keyboard ROG Claymore
    Mouse ROG Pugio
    AkaNe0's Avatar
    Join Date
    Jun 2014
    Reputation
    19
    Posts
    566

    Quote Originally Posted by Ingvarr100th View Post
    Now my modules reacting to AURA, but animation is very choppy on rainbow, wave, comet, starry night.
    This is how it works on rainbow:

    Breathing and Color Cycle doesn't activate them, they have the last used color.
    Flash and dash works fine when VGA is last in sequence, but then VGA is not "flashing"
    Yoyo make only one module flashing.
    I see that you have 4 memory sticks. Can you tell me your system specs in detail?
    Motherboard:
    BIOS:
    OS:
    Memory:

    Quote Originally Posted by NeoPlex View Post
    ok previous problem was fixed, just turn off PC and unplug power cable...

    but then I tried again instal this beta -> Asus Aura Crashing "has stopped working"->this BETA version was cleaned from PC -> installed back version 1.05.25 aaand -> Asus Aura Crashing "has stopped working"....


    so how to fix and install 1.05.25 at least in functional status as it was before this beta.

    1) uninstall Aura SW
    2) in BIOS turn off led lighting
    3) turn off your PC + unplug power cable
    4) turn on, clean rest of the Aura SW manually (C:\Program Files (x86)\ASUS\AURA) + use CCleaner to clean registry
    5) reboot
    6) install version 1.05.25... now Aura should be working like before

    resume
    BETA version works strange for me... worked only first time RAM: CMR16GX4M2C3000C15 was detected , but motherboard was not detected by Aura SW. After reinstalling BETA Aura SW stopped worked at all, even version 1.05.25 ("has stopped working") and way how bring Aura SW 1.05.25 into original functional status was very difficult.

    RAM: CMR16GX4M2C3000C15
    MB: 90MB0UJ0-M0EAY0
    VGA: 90YV09N2-M0NA00

    but yeah... we have a progress with RAM: CMR16GX4M2C3000C15...
    Firstly thanks for trying this beta version.

    1. Once the 1.05.26 was installed, the LED of your motherboard wasn't working, but does in AURA the motherboard was appearing?
    2. Were you able to reinstalled and launched the 1.05.25 version? Please try to redo a clean install again.
    And don't forget, Keep pushing it !

  4. #24
    ROG Member Array
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    17

    Firstly thanks for trying this beta version.

    1. Once the 1.05.26 was installed, the LED of your motherboard wasn't working, but does in AURA the motherboard was appearing?
    2. Were you able to reinstalled and launched the 1.05.25 version? Please try to redo a clean install again.
    No problem, I'm SW tester in real life

    1)

    1) clean install of 1.05.26, during restarting of system every leds was synchronized (RAM, MB + connected fan and led strip, VGA)
    2) after restart I started the Aura SW, for few moments I saw all compononents detected in Aura SW (RAM, MB and VGA), but then MB stopped lighting and also MB disappeared from Aura SW (also menu/ tabs for Shut off and Synchronized disappeared. I just had only one tab is SW aura - so we can say that disappeared everything what is connected with MB setting). Until this time, after reinstallation... I was not able to launch this version 1.05.26 at all every time I got "has stopped working"


    2)
    YES... I was able to install 1.05.25 but not so easily. , see my process of installation above (previous post)

  5. #25
    ROG Guru: Green Belt Array AkaNe0 PC Specs
    AkaNe0 PC Specs
    MotherboardMaximus X Formula
    Processori7-8700K
    Memory (part number)G.skill Trident-Z RGB
    Graphics Card #1Strix GTX 1080 Ti
    CaseOpenBenchtable
    Power SupplySeasonic PRIME Platinum 1000W
    Keyboard ROG Claymore
    Mouse ROG Pugio
    AkaNe0's Avatar
    Join Date
    Jun 2014
    Reputation
    19
    Posts
    566

    Quote Originally Posted by NeoPlex View Post
    No problem, I'm SW tester in real life

    1)

    1) clean install of 1.05.26, during restarting of system every leds was synchronized (RAM, MB + connected fan and led strip, VGA)
    2) after restart I started the Aura SW, for few moments I saw all compononents detected in Aura SW (RAM, MB and VGA), but then MB stopped lighting and also MB disappeared from Aura SW (also menu/ tabs for Shut off and Synchronized disappeared. I just had only one tab is SW aura - so we can say that disappeared everything what is connected with MB setting). Until this time, after reinstallation... I was not able to launch this version 1.05.26 at all every time I got "has stopped working"


    2)
    YES... I was able to install 1.05.25 but not so easily. , see my process of installation above (previous post)
    Alright, that's very helpful. Can you provide the full specs of your system:
    MB: Strix B350-F 90MB0UJ0-M0EAY0
    BIOS:
    OS:
    VGA: Strix GTX 1070 90YV09N2-M0NA00
    Memory: Corsair 2x8GB CMR16GX4M2C3000C15
    KB:
    Mouse:
    And don't forget, Keep pushing it !

  6. #26
    ROG Member Array
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    17

    Quote Originally Posted by AkaNe@Asus View Post
    Alright, that's very helpful. Can you provide the full specs of your system:
    no problem

    MB: Strix B350-F 90MB0UJ0-M0EAY0
    BIOS: 0811
    OS: Windows 10 (64) Home
    VGA: Strix GTX 1070 90YV09N2-M0NA00
    Memory: Corsair 2x8GB CMR16GX4M2C3000C15
    KB: TESORO LOBERA TS-G5NL
    Mouse: Logitech G502 Proteus Core - MG137a6d

  7. #27
    ROG Enthusiast Array
    Join Date
    Aug 2017
    Reputation
    10
    Posts
    35

    Quote Originally Posted by AkaNe@Asus View Post
    I see that you have 4 memory sticks. Can you tell me your system specs in detail?
    Firstly thanks for trying this beta version.
    Motherboard: Asus ROG STRIX Z270-F
    BIOS: 1009
    OS: Windows 10 1709 (Fall Creators Update)
    Memory: 2xCMR16GX4M2C3466C16 (4 sticks - 32 GB)
    ME ver.: 11.7.0.3290
    MEI driver ver.: 11.7.0.1032
    Click image for larger version. 

Name:	uefi2.jpg 
Views:	3 
Size:	141.2 KB 
ID:	68411

    When RAM is detached in AURA, animation is smooth on MB and GPU. Once attached it doesn't work well.
    Last edited by Ingvarr100th; 10-26-2017 at 01:27 PM.

  8. #28
    New ROGer Array
    Join Date
    Oct 2017
    Reputation
    10
    Posts
    3

    Im lagging here on some effects. I will send a video to explain


    1 or 2 effects is working good, without those lag. Well, this is the way.
    Just need to fix the lagg and it will be perfect.

    System Specs:

    Motherboard: ROG STRIX H270F GAMING
    BIOS: Latest version 0809
    OS: Windows 10 64 LTSB
    Memory: CMR16GX4M2A2666C16 -> 2666MHz 16GB (2x8GB)
    VGA: STRIX GTX 1080ti Non OC Edition
    KB: Motospeed CK108
    Mouse: Motospeed V30
    Last edited by msvinifk; 10-28-2017 at 12:57 PM.

  9. #29
    New ROGer Array
    Join Date
    Oct 2017
    Reputation
    10
    Posts
    2

    Strix ROG Z270E motherboard not being detected by Aura

    I have a Strix Z270E motherboard, corsair vengeance RGB, and a Strix 1060 6gb gpu. The ram and gpu are detected by aura and work fine, but my mobois not detected by the software. I am using the beta version to allow aura to work with my ram but when i was using the current main release it was not detecting it either. if anyone knows a fix it would be greatly appreciated!

  10. #30
    ROG Guru: Green Belt Array AkaNe0 PC Specs
    AkaNe0 PC Specs
    MotherboardMaximus X Formula
    Processori7-8700K
    Memory (part number)G.skill Trident-Z RGB
    Graphics Card #1Strix GTX 1080 Ti
    CaseOpenBenchtable
    Power SupplySeasonic PRIME Platinum 1000W
    Keyboard ROG Claymore
    Mouse ROG Pugio
    AkaNe0's Avatar
    Join Date
    Jun 2014
    Reputation
    19
    Posts
    566

    Quote Originally Posted by NeoPlex View Post
    no problem

    MB: Strix B350-F 90MB0UJ0-M0EAY0
    BIOS: 0811
    OS: Windows 10 (64) Home
    VGA: Strix GTX 1070 90YV09N2-M0NA00
    Memory: Corsair 2x8GB CMR16GX4M2C3000C15
    KB: TESORO LOBERA TS-G5NL
    Mouse: Logitech G502 Proteus Core - MG137a6d
    Thanks, spec detail added.


    Quote Originally Posted by Ingvarr100th View Post
    Motherboard: Asus ROG STRIX Z270-F
    BIOS: 1009
    OS: Windows 10 1709 (Fall Creators Update)
    Memory: 2xCMR16GX4M2C3466C16 (4 sticks - 32 GB)
    ME ver.: 11.7.0.3290
    MEI driver ver.: 11.7.0.1032

    When RAM is detached in AURA, animation is smooth on MB and GPU. Once attached it doesn't work well.
    For Color Cycle and Breathing effect, it's "normal" those effect do not work on the Corsair memory. This is due to the technology they use that is not compatible.

    However I have reported the issue for flash and dash and that unsync the memory makes the effect smoother.

    Quote Originally Posted by msvinifk View Post
    Im lagging here on some effects. I will send a video to explain

    1 or 2 effects is working good, without those lag. Well, this is the way.
    Just need to fix the lagg and it will be perfect.

    System Specs:

    Motherboard: ROG STRIX H270F GAMING
    BIOS: Latest version 0809
    OS: Windows 10 64 LTSB
    Memory: CMR16GX4M2A2666C16 -> 2666MHz 16GB (2x8GB)
    VGA: STRIX GTX 1080ti Non OC Edition
    KB: Motospeed CK108
    Mouse: Motospeed V30
    Thanks for the video. Can you tell me exactly which effects have the lags? We've already noted that the wave effect need to be adjusted.
    And don't forget, Keep pushing it !

Page 3 of 5 FirstFirst 1 2 3 4 5 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •