10-08-2017 03:34 PM - last edited on 03-05-2024 09:50 PM by ROGBot
10-09-2017 09:16 AM
Alexandre_ma wrote:
So after installing the 0801 update my idle temps are 28C and load temp 50C. This is with fans set at their lowest speed. At full speed it can go to 16C. My room temp is about 24, how is this happening? I have a 4ghz OC at 1.35V and my cooler is a Enermax TR4 360.
Anyone has any idea of what can be done? Im afraid of ruining my 1950x 😕
Rolling back to different bios still has the same issue if i overclock.
Thanks
10-09-2017 09:30 AM
10-09-2017 02:42 PM
leyabe wrote:
I think the question is more along the lines of "how can the CPU temperature be lower than room temperature"?.
I wouldn't expect the CPU temp to be lower than room temperature. It that were the case I would suspect something wrong.
You're cooling the CPU with air aspirated from the room, it cannot magically give temperatures significantly cooler than what the air you're cooling with is at (maybe by a few degrees due to the fooling factor of moving air, but not by ~10°C, at least I wouldn't think so.
That said, I'm using the Enermax Liqtech TR4 360 AIO water cooler too, a high performance cooling solution, stock CPU speed (no CPU overclocking), and get idle temps of 30 to 32°C with room temperature of 25°C, which makes sense and is the best temps I ever had with any previous build.
I'm on BIOS 0801 myself too, so this may not be a BIOS issue, as my temps appear normal to me.
10-10-2017 05:17 PM
10-09-2017 01:31 PM
10-11-2017 08:44 AM
Alexandre_ma wrote:
So after installing the 0801 update my idle temps are 28C and load temp 50C. This is with fans set at their lowest speed. At full speed it can go to 16C. My room temp is about 24, how is this happening? I have a 4ghz OC at 1.35V and my cooler is a Enermax TR4 360.
Anyone has any idea of what can be done? Im afraid of ruining my 1950x 😕
Rolling back to different bios still has the same issue if i overclock.
Thanks
10-17-2017 05:11 AM
vpkb1998 wrote:
I get the same result with idle/load, and have the same setup. Although, my voltage is 1.395/1.4 using the 4Ghz profile.
10-17-2017 11:48 PM
Alexandre_ma wrote:
So after installing the 0801 update my idle temps are 28C and load temp 50C. This is with fans set at their lowest speed. At full speed it can go to 16C. My room temp is about 24, how is this happening? I have a 4ghz OC at 1.35V and my cooler is a Enermax TR4 360.
Anyone has any idea of what can be done? Im afraid of ruining my 1950x 😕
Rolling back to different bios still has the same issue if i overclock.
Thanks
10-18-2017 05:28 AM
gupsterg wrote:
Are you using latest OLED FW? (links in here)