AURA v1.05.25 [Report all issues in this thread]

[AkaNe0]

A new version of AURA software is available here. Before reporting, make sure to:
-> Uninstall previous version of AURA through the Control Panel and reboot your system.
-> Run "setup" as Administrator (Right click on "Setup" and "Run as Administrator")
-> Reboot your computer before starting the new AURA
-> If you are still having problem with installing AURA, please run the AURACleaner once you've uninstall and reboot your computer and before launching the "Setup" file.

Changelog v1.05.25

• Update CPU-Z 1.79.1 or later version to avoid conflict with Aura
• Features new UI with RGB value direct key-in
• Fix Aura reset to default when booting and waking up from sleep

Note
For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not work.

Known issues

• Corsair 16GB kits (2x8GB) not detecting in AURA software -> Try out the BETA version that fix the issue
• Issues with the wave effect not working properly
• Install problem with Windows Fall Creators Update => Temporary solution available here
• CPU loading issue with system freezing
  

[drgabber]

I copied this from another thread:

Aura version 1.05.25 isn't detecting my motherboard or RGB strip lighting, just my G.Skill RGB RAM. The motherboard and RGB strips are flashing a lighting scheme I haven't used in months and the only way I can get it to stop is by turning off RGB lighting in the BIOS. I tried BIOS versions 1601 and 1701. Interestingly, Aura version 1.04.29 works fine and most of the versions between 1.04.29 and 1.05.25 crash when I try to open them.

To be clear, 1.05.25 does not crash like some of the previous versions. The problem now is that it does not detect motherboard or RGB strip lighting on my Crosshair VI motherboard. RGB control of my G.Skill RAM is working.

Any suggestions?

[takitoes]

Working really nicely for me, even with 6 x newly acquired inwin Polaris fans.

Aura still not detecting my Corsair CMR16GX4M2C3000C15 kit (ill post in the other thread too).

Hoping for a fix soon but pretty happy so far

[Gofran]

well i have still issue with mouse gladius II and this mine second keyboard from this batch H9 when on breathing mode on red dont know if it change if choose another collor but it has some flicker moments then returns to normal only the keyboard flickers nothing else

second vidoe with this issue keyboard is unplugging going back to sync also tried it with armoury thought was going to work but same issue clean install windows 10 only motherboard drivers where installed and aura sync and armoury starting to think if all usb ports are bad or if this an software issue https://drive.google.com/open?id=0B1...FZ6dXI0blJsWXM 2

[crazymanash]

There still doesn't seem to be any options for my horus gk2000 rgb keyboard in the aura software.

Can you tell me if this happpening soon?

Thanks
Ash

[mav571]

On X299-XE Strix is problem with memory sequence
Rainbow
right now Rainbow effect is:
4321 CPU 5678
I think it should be:
1234 CPU 5678
or for the best effect:
Strix (left side of teh MB), memory 1234, ROG (in the middle MB), memory 5678,

This same on Comet. Right one every memory modul is treat like one so it looks stupid.
It is possible to change every memory module order?

[Chrome_N]

Not really a bug - more a feature request. The Crosshair VI Extreme has a lovely backplate with LEDs on the audio jacks. I'd like to have the option to turn ALL lights off when switching off my machine - Aura can only do this for the Aura lights but it should be able to control audio jacks and other mainboard lights as well as the Ethernet jack, too.

[Gofran]

There still doesn't seem to be any options for my horus gk2000 rgb keyboard in the aura software.

Can you tell me if this happpening soon?

Thanks
Ash

i found out that aura does not support horus

[Krogsager]

Sad to see that there's still problems detecting the 16gb kits... T_T

So far so good, though. Had no problems uninstalling/installing this version!

[AkaNe0]

I copied this from another thread:

Aura version 1.05.25 isn't detecting my motherboard or RGB strip lighting, just my G.Skill RGB RAM. The motherboard and RGB strips are flashing a lighting scheme I haven't used in months and the only way I can get it to stop is by turning off RGB lighting in the BIOS. I tried BIOS versions 1601 and 1701. Interestingly, Aura version 1.04.29 works fine and most of the versions between 1.04.29 and 1.05.25 crash when I try to open them.

To be clear, 1.05.25 does not crash like some of the previous versions. The problem now is that it does not detect motherboard or RGB strip lighting on my Crosshair VI motherboard. RGB control of my G.Skill RAM is working.

Any suggestions?

I tried to replicate the issue using a Crosshair with the latest 1701 BIOS and a RGB strip connected on the bottom right of the board, but all was showing up on my system. Can you provide additional screenshot of your AURA software?

There still doesn't seem to be any options for my horus gk2000 rgb keyboard in the aura software.

Can you tell me if this happpening soon?

Thanks
Ash

GK2000 is only AURA RGB and do not support AURA Sync.

On X299-XE Strix is problem with memory sequence
Rainbow
right now Rainbow effect is:
4321 CPU 5678
I think it should be:
1234 CPU 5678
or for the best effect:
Strix (left side of teh MB), memory 1234, ROG (in the middle MB), memory 5678,

This same on Comet. Right one every memory modul is treat like one so it looks stupid.
It is possible to change every memory module order?

Thanks for the suggestion.

well i have still issue with mouse gladius II and this mine second keyboard from this batch H9 when on breathing mode on red dont know if it change if choose another collor but it has some flicker moments then returns to normal only the keyboard flickers nothing else

second vidoe with this issue keyboard is unplugging going back to sync also tried it with armoury thought was going to work but same issue clean install windows 10 only motherboard drivers where installed and aura sync and armoury starting to think if all usb ports are bad or if this an software issue https://drive.google.com/open?id=0B1...FZ6dXI0blJsWXM 2

As I need more details regarding your issue, I will PM you.