AURA v1.05.25 [Report all issues in this thread]

[Mapantz]

I just finsished my new build. Ryzen 5 1600x on Asus Strix B350-F, ROG STRIX-GTX1070-O8G-GAMING, Corsair CMR16GX4M2C3000C15, Phanteks Eclipse P400s

I have updated all BIOS, software, windows 10 updates, etc..
Aura 1.05.26 crashes everytime I try to run it. Version 1.05.25 works but it doesnt detect the case or RAM.

[

There's an Aura 1.05.26?

[sethiol]

There's an Aura 1.05.26?

Why, yes, yes there is a .26. Its a beta version trial fix for Corsair 2x8GB memory RGB sets. Aura, for whatever reason, works on almost all other Corsair sets but the 16GB sets. Seems oddly odd, but ehh.

I did discover a semi fix. Shut down the PC, total power off shut down not just "shut down" from windows. Let the PC sit for a few minutes, and then restart. It "works" when it decides to work. I just had the system shut off for just over an hour, powered on, and WAA WAA WAA, Aura crashed.

[AkaNe0]

WOW Finally it worked.. But the two screws you are talking about.. I cant find them to loose the cover.. I ended up loosen the heatshink. But the time i had the power off was enough to it start lightning when i put back power on. Uninstall AURA and reinstall and FINALLY it found it in AURA. THANK YOU SO MUCH.

Glad it worked out!

Here is where are located the screws to remove the I/O cover as well as a picture of the connector to look at for reference. For both Z370-E and Z370-F, screws location is the same.

I just finsished my new build. Ryzen 5 1600x on Asus Strix B350-F, ROG STRIX-GTX1070-O8G-GAMING, Corsair CMR16GX4M2C3000C15, Phanteks Eclipse P400s

I have updated all BIOS, software, windows 10 updates, etc..
Aura 1.05.26 crashes everytime I try to run it. Version 1.05.25 works but it doesnt detect the case or RAM.

Please note that the 1.05.26 is a beta version. A new version will come up soon and will fix the Corsair issue. For now, please use the 1.05.25 version.

FIXED. Two things contributed.
- the rgb LED on the motherboard wasn't actually plugged in
- the bios update fixed the issue with aura not detecting the rgb lighting

Thanks for all the help. I really appreciate it

Great it works now!

[bixsi]

very annoying

what is the problem ?please help me,


I am using asus aura lighting control but an old version.


there was no such problem before

[Brighttail]

So where are we at here? Just really waiting for the new Aura to come out? Honestly I have been late to the party getting my build slowly done, but it is up, everything is installed EXCEPT Aura right now. Seriously, after what I went through to get this computer up and running the LAST thing I want to do is have to tear it apart to have to unplug RGB headers. :/

[capitaltpt]

I've had a problem with every AURA version to date when it comes to addressable LED strips. I'm using CableMod Addressable strips plugged into the addressable header on my Zenith Extreme, but Aura only shows 1 option for "ADD strip" in the drop down. As a result, the entire strip is the same color rather than being able to individually address each LED. No idea if it's something my end or the software. Can anyone confirm? Any ideas?

[AkaNe0]

very annoying
what is the problem ?please help me,
I am using asus aura lighting control but an old version.
there was no such problem before

Check the dedicated thread.

So where are we at here? Just really waiting for the new Aura to come out? Honestly I have been late to the party getting my build slowly done, but it is up, everything is installed EXCEPT Aura right now. Seriously, after what I went through to get this computer up and running the LAST thing I want to do is have to tear it apart to have to unplug RGB headers. :/

I will give a try to AURA 1.05.25 again. For the new version, we need few more days.

I've had a problem with every AURA version to date when it comes to addressable LED strips. I'm using CableMod Addressable strips plugged into the addressable header on my Zenith Extreme, but Aura only shows 1 option for "ADD strip" in the drop down. As a result, the entire strip is the same color rather than being able to individually address each LED. No idea if it's something my end or the software. Can anyone confirm? Any ideas?

Under Static and Strobing effects, the LED of the addressable cannot be controlled in Gradient. However you can do it using the other effects like Yoyo, comet or Starry-night. However, this feature would be nice to have. I have added it into the suggestion list!

[capitaltpt]

Under Static and Strobing effects, the LED of the addressable cannot be controlled in Gradient. However you can do it using the other effects like Yoyo, comet or Starry-night. However, this feature would be nice to have. I have added it into the suggestion list!

It would be nice to do more than just a gradient as well. Ideally, I'd like to be able to turn off specific LEDs on the strip to even out the lighting in my case. I'd like it work the same way the RGB RAM and Backplane on the motherboard work where each is individually selectable and controllable........you know.....addressable

[salada2k]

ASUS Maximus IX Formula w/ Corsair Dominator RGB 4x8GB

v1.05.25: RGB Headers on board work fine. Corsair RAM can only do some effects. Static always works no problem and Aura is stable. Breathing does not work at all on the RAM sticks. Rainbow for example, works, but only for some time. After a while, the RAM sticks stay the same colour and the LED strips dont fade in and out anymore, they just 'snap' to other colours and dont rotate through all the colours, just a couple of colours. At this point the Aura software starts lagging, and only responds to one click every 10 seconds. The only way out of this is to reboot.

[bixsi]

I have updated my bios, but the problem still persists.
Is this a card or LED fault??
Is it an aura software error???
I'm using the new version of Aura

I have to send it to warranty service ? pls help