AURA v1.05.25 [Report all issues in this thread]

[eviqine]

bios out guys...update

[KeksimusMaximus]

bios out guys...update

bios for what? not for Maximus X Hero

[Walkyrie]

bios out guys...update

If your answer is for me, i got my Z170 PRO Gaming/Aura with last bios (3501)

[eviqine]

bios for what? not for Maximus X Hero

what is ur problem about aura?dont open or u cant find something?

[KeksimusMaximus]

what is ur problem about aura?dont open or u cant find something?

when installing it on fresh, clean freshy fresh Windows 10 64bit pro FCU 1709 system that wasnt tainted with any 3rd party software it will show a "Can't read AsIO.sys (2)" error during installation and then after launching it will not detect motherboard and ram

i can make a fresh install of previous version of Windows 10 64bit pro CU 1703 system and it will install without problem out of the box

[Bunjoman]

AURA V1.05.25 seemed to be working well and I encountered no examples of excessive CPU use. However I found that HWinfo x64 v 558 would now start but not complete gathering hardware details. Aura also failed to start later reporting 'broken frames'. I rather suspect that they were contending for the same bus. I'm still on Windows 1703 and have now uninstalled AURA again.

[eviqine]

again ...its broken..withoute doing nothing....asus plz...update...for Z370F

[Flint018]

Hi,

i have a problem, whenever i play games theres always a time that my aura sync wont work and just gonna stuck in the last color.

then i try to reset the aura sync other light will work but my ROG pugio wont work anymore. I always had to reboot and reinstall the aura for my mice rgb to work.

mobo- z270f
dram-gskill rgb
gpu-rx580
keyboard-claymore
mouse-pugio

[eviqine]

i cant find a solution...only small fixes....still the aura loses the motherboard.....................

[AkaNe0]

I just tried the "AURA Cleaner" tool to reinstall everything properly and now, when I launch Aura software, I immediatly get an error message : "AURA has stopped working" and it opens up a "Doctor Dump" website.

After few cases have been reported, we are working on fixing this issue.

Hi all,

Got a problem on my fresh installed Rig (so no fancy settings or apps, just a clean W10 install with Aura) and of course I enabled SPD writting in the UEFI.

Whatever i tried (via bios or Aura application) my 4x8 Trdient Z RGB doesn't want to turn off when the PC goes to sleep (in fact they just follow the pattern they were before sleeping).
The others motherboard zone follows Aura settings, but the Ram doesn't oO

Specs:
MB :X99 Strix Gaming (with latest Bios and latest Aura)
CPU : 5820K
RAM : 32 GB Trident Z RGB (F4-2400C15Q-32GTZR)
OS: Windows 10 Enterprise LSTB

No idea if that matters but i don't use (yet) the 2 rgb headers so no calibration has been done on those.

Any clues ?

Thanks

To turn off the RAM when PC is going to sleep, you need to do the following:
-> In the AURA software go to the Shut down tab
-> Select Off and apply

Hello

I made a clean install of Windows 10, version 1709 when trying to install Aura getting error AsIO.sys (2) not found.

thank you.

Few users reported the issue with the new Windows creator update. We are working on fixing this issue.

Hi,
I have the following Aura sync compatible devices:

-NZXT Noctis 450 ROG Case
- GammaxxGT RGB Fan
-GSKILL TridentZ Ram
-Asus Claymore Keyboard
-Asus Gladius II Mouse

It all seems to work, but it seems immediately that the claymore colors do not sync to the same timing as everything else.

It also seems after a long period of time, they all go out of sync.

Thoughts?

Thanks,

Santo

Do you have ASUS Armoury installed? If so, try to close Armoury before you launch AURA - make sure it is not runing in the background process. Then Unlinked and linked again the ROG Claymore to AURA.

Make sure to have the latest Claymore firmware as well.

Since the update before last one my Aura Style Software is this:

I don't know if its normal, but i cannot see number or options, I have to imagine the real position!

Please try a fresh clean install of AURA. If the issue is still happening please provide your system information:
MB:
Processor:
OS:
Memory:
VGA:
Cooler:
Mouse:
Keyboard:

AURA V1.05.25 seemed to be working well and I encountered no examples of excessive CPU use. However I found that HWinfo x64 v 558 would now start but not complete gathering hardware details. Aura also failed to start later reporting 'broken frames'. I rather suspect that they were contending for the same bus. I'm still on Windows 1703 and have now uninstalled AURA again.

Thanks for the report. Could you provide your system information:
MB:
Processor:
OS:
Memory:
VGA:
Cooler:
Mouse:
Keyboard:

Hi,

i have a problem, whenever i play games theres always a time that my aura sync wont work and just gonna stuck in the last color.

then i try to reset the aura sync other light will work but my ROG pugio wont work anymore. I always had to reboot and reinstall the aura for my mice rgb to work.

mobo- z270f
dram-gskill rgb
gpu-rx580
keyboard-claymore
mouse-pugio

1. Do you have the latest firmware installed for your Pugio - currently 0149?
2. Do you have the latest BIOS installed for your Strix Z270-F motherboard (BIOS 1009 on 24/10/2017 date)?