cancel
Showing results for 
Search instead for 
Did you mean: 

I'm fed up with trying to figure out this board!

vpkb1998
Level 7
I've never experience so many anomalies with a MB, very disappoint and annoying considering the price of the board. There's random error codes coming out of the blues: check CPU, RAM, HDD, etc.. Also, what's the point of setting manual voltage when the MB overwrites it? The system seems to be running fine despite these codes so I don't understand what is going on here.
2,035 Views
3 REPLIES 3

C_1
Level 7
There's a few UEFI updates undergoing evaluation in BETA atm. I'd see if those fix some of your issues.

C@mM! wrote:
There's a few UEFI updates undergoing evaluation in BETA atm. I'd see if those fix some of your issues.


I'm on 0801 - after resetting the CMOS, some issues, i.e. Load VGA BIO went away but now the DRAM lit.

vpkb1998 wrote:
I'm on 0801 - after resetting the CMOS, some issues, i.e. Load VGA BIO went away but now the DRAM lit.


6 days into 1950x build- reset cmos twice after 801 bios. had problems initially wih the 3 lock down screws on the 1950x cpu