cancel
Showing results for 
Search instead for 
Did you mean: 

Question about M.2 and PCIe slots on ASUS Hero VIII Alpha

sebna
Level 7
Hi All,

Just a quick question because I am not sure if I understand the manual correctly.

I have M.2 populated and operating in PCIe mode. According to instructions it means that slot PCIe4_3 will be automatically disabled because M.2 is sharing PCIe lines with it.

But in other part of instruction it also says that if slot PCIe4_3 is operating in 4x mode slots PCIe1_2 and 1_3 will be disabled... so does that mean that if I have populated M.2 slot with NVme drive operating at x4 speed that not only the 4_3 but also 1_2 and 1_3 slots will be disabled effective leaving me with one slot of Vid card operating at full speed x16 and one expansion slot PCIe1_1 operating at 1x speed so just one PCIe expansion slot for whole MB?

I would appreciate clarification.

Thanks.
3,028 Views
2 REPLIES 2

sebna
Level 7
Nobody? Not even staff?

Surly somebody knows?

I am counting on you guys and gals!

Cheers,
seb

Did you not plug the m.2 into the actual m.2 position on the board (not sure what you mean by pcie mode), I also have my 1080 installed in the 16x spot on the board and I do not believe I am not getting 16x though. Any thing you would like me to check?

69082