Results 11 to 12 of 12
Thread: EKFC Titan X (Pascal) waterblock
-
10-21-2017 01:39 AM #11Banned Array JustinThyme PC Specs
JustinThyme PC Specs Laptop (Model) G752VY-DH72 Motherboard Rampage VI Extreme Processor I9 9940X Memory (part number) 64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17 Graphics Card #1 ASUS Strix 2080Ti O11G @ 2.1GHz Graphics Card #2 ASUS Strix 2080Ti O11G @ 2.1Ghz Graphics Card #3 ROG Nvlink Graphics Card #4 Have to feed animals Sound Card External Audioengine D1 24 bit 192kbps DAC Monitor ASUS PG348Q @ 100Hz Storage #1 Intel 905P 480GB U2 flavor Storage #2 Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1 CPU Cooler HeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS Case Phanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM Power Supply Corsair AX 1500i Keyboard ASUS Claymore Mouse ASUS Spatha, Logitech MX Master Headset Sennheiser HD 700 Mouse Pad ASUS ROG Sheath Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub OS Win10 Pro 1809 Network Router NetGear NightHawk X10 Accessory #1 NetGear Prosafe 10GBe Switch Accessory #2 Qnap TVS-682 NAS modded with I7 CPU
- Join Date
- Nov 2013
- Reputation
- 144
- Posts
- 3,855
Moving up in the world I see!
Originally Posted by Nate152
Looking at their design and the fact that there is a picture with an EKWB GPU block with their leds in it Im guessing it will work, will just have to be crafty. I guessing you can still use the Leds but will have to route the wiring under that armor. My bet is have the leds under and insert them in the block as you are seating it.
Or you can pick up 4 inch RGB strips and tape them to another area.
-
10-21-2017 02:28 AM #12ROG Guru: Black Belt Array Korth PC Specs
Korth PC Specs Motherboard ASUS X99 R5E (BIOS2101/1902) Processor Haswell-EP E5-1680-3 SR20H/R2 (4.4GHz) Memory (part number) Vengeance LPX 4x8GB SS DDR4-3000 (CMK32GX4M4C3000C15) Graphics Card #1 NVIDIA Quadro GP100GL/16GB, 16xPCIe3, NVLink1 (SLI-HB) Graphics Card #2 NVIDIA Quadro GP100GL/16GB, 16xPCIe3, NVLink1 (SLI-HB) Sound Card JDS Labs O2+ODAC (RevB), USB2 UAC1 Monitor ASUS PG278Q Storage #1 Samsung 850 PRO 512GB SSDs, 4xSATA3 RAID0 Storage #2 Comay BladeDrive E28 3200GB SSD, 8xPCIe2 CPU Cooler Raijintek NEMESIS/TISIS, AS5, 2xNH-A14 Case Obsidian 750D (original), 6xNH-A14 Power Supply Zalman/FSP ZM1250 Platinum Headset Pilot P51 PTT *modded* OS Arch, Gentoo, Win7x64, Win10x64 Network Router Actiontec T3200M VDSL2 Gateway Accessory #1 TP-Link AC1900 Archer T9E, 1xPCIe Accessory #2 ASUS/Infineon SLB9635 TPM (TT1.2/FW3.19) Accessory #3 ASUS OC Panel I (FW0501)
- Join Date
- Mar 2015
- Reputation
- 152
- Posts
- 2,719
I've found filament LEDs (with or without their insulation) useful for some tricky mounting applications. Or actual SMT LED parts strung between tiny-gauge (like 38AWG magnet-wire or wire-wrap stuff with insulation stripped off) along a length of transparent electrical tape.
Heat output is a trivial concern - they can't even melt or discolour the tape they're stuck onto - unless you have many, many, many of them strung up.
Although hand-soldering them is delicate and tedious work which can drive you mildly insane if you've got a lot of discrete components, lol.
[Edit: Not meant to be interpreted as me prompting observations about my (in)sanity, thank you.]Last edited by Korth; 10-21-2017 at 02:33 AM.
"All opinions are not equal. Some are a very great deal more robust, sophisticated and well supported in logic and argument than others." - Douglas Adams
[/Korth]
Reply With Quote
