Hi there!

I am new to these forums since this is my first time building with an Asus board.

I got myself a Ryzen 5 1600 and a be quiet! Dark Rock 3 to have some fun with this STRIX B350-F board and OC it 4GHz with RAM speeds around 3000MHz. I got the GSkill Ripjaws V 3000MHz CL15 btw.
Trough my quest, I found some weird stuff like:
- Not having fixed voltage option on CPU/SOC voltage
- not having the option to enable/disable Spead Spectrum
- not being able to change the setting for the command rate timing of the RAM. Even if I set it to 2T the board ignores it and always sets it to 1T

This is really unfortunate since I lost the silicon lottery and got some Hynix dies and will need all the help I can when tweaking.
Spread Spectrum might be holding me back too since I need 1.28v for 3.8GHz and 1.4v for 3.9GHz stable, all with RAM at 2133MHz to eliminate other variables. Spread Spectrum was key back in the day with my 2500k, taking a 4.3GHz OC from not posting at 1.4v to a 4.5GHz stable at 1.35v

I have the latest 0902 BIOS from the Asus support page.

Anyone experiencing this?
Will there be more settings added, including Spread Spectrum, so we can tweak our system a bit more? Almost every board has this option...

Thanks!