Results 1 to 6 of 6

Hybrid View

  1. #1
    New ROGer Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    8

    RAID Killing system

    I built my system, fresh install of Windows 10 Pro, installed all the updated drivers and it was running great, Then it was time to setup my RADI1 using 2 4TB drives and that's when things started too happen. The computer would not wake from sleep. When I rebooted it would take five + minutes to restart. If I shutdown the system all the fans would still be on but the screen would be black and I would just hold power button to power it off. Then when it finally started I just let it idle for awhile and then the video card fan ramped up to 100% and I was able to here it in another room, so I held the power button to bower it off nd then I disconnected the 2 RAID drives and everything back to normal. I then tested both hard drives using WD diags and they both based. Put both hard drive back on and now doing the same thing again, Is there a setting in the rad setup that I need to try and change? I have the caching to read only should I try read/wright? I really need help on this new build.

    Specs Below:

    AMD Ryzen 1800x
    Asus Crosshair VI Hero
    CORSAIR Vengeance RGB 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200
    XFX Vega 64 Air Cooled
    Corsair HX1000I
    SAMSUNG 850 EVO 2.5" 1TB SATA III 3D NAND Internal Solid State Drive
    2 4TB Western Digital Black drives in RAID 1 for data

    Thanks,
    Dennis

  2. #2
    ROG Guru: Yellow Belt Array unknownmiscreant PC Specs
    unknownmiscreant PC Specs
    Laptop (Model)Dell E430s (i7)
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 1700X
    Memory (part number)F4-3200C14D-16GFX (Currently clocked 3466MHz)
    Graphics Card #1EVGA GTX1070 FTW
    Sound CardAsus Strix Soar
    Monitor2x Dell U2412M
    Storage #1Intel 540s
    Storage #2Intel 520
    CPU CoolerEK Supremacy Evo
    CaseCorsair 460x
    Power SupplyEVGA 850 G2
    Keyboard Logitech G610 Cherry MX Brown
    Mouse Logitech G502
    Mouse Pad Logitech G640
    Headset/Speakers Custom built sound system
    OS Win 10
    Network RouterNetgear Nighthawk

    Join Date
    Jul 2017
    Reputation
    10
    Posts
    180

    I had the same issues. Mine shut down after a while, as it was flushing changes to disk. Mine never went to sleep with raid setup, fans stayed on and everything.

    Never solved any of it, and I actually disabled raid since it was such a pain in the backside. In terms of data security, you would be better off to keep one drive disconnected, and backup data to it on a regular basis. That way it has much less chance of being hit by ransomware.

    I think you need to disable win10 fast startup and compatibility support module in bios, but don't quote me on that, I have never tried it personally, as I abandoned RAID fairly quickly. I will likely try it again after my exams are over.
    Last edited by unknownmiscreant; 10-22-2017 at 10:09 AM.

  3. #3
    New ROGer Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    8

    Thanks for the info. I do have Win10 fast startup disabled I will give compatibility support module in bios a try. I have also ran into this post on AMD forums https://community.amd.com/thread/214245 even though it is about BSOD. I have not finished reading it all the way throw. Been really busy with work, I will keep you posted.

  4. #4
    ROG Member Array
    Join Date
    Nov 2013
    Reputation
    10
    Posts
    19

    Hello

    Did you get anywhere with this?

    Thanks

  5. #5
    New ROGer Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    8

    Yes I did. From the post in the AMD forum I linked to I found a part and it fixed it. What I did is I changed the driver of AMD RAID storpoint to version 8.2.0-00024. I manually installed it buy going to device manager, update driver for the 2 AMD RAID storpoint, clicked on Browse my computer for drivers, then clicked on let me pick from a list of devices on my computer, then clicked on Have Disk. pointed it to C:/AMD-Chipset-Drivers\Packages\Drivers\SBDrv\RAID_TR\RAID_driver \WT64A folder. Then it updated it to version 8.2.0-00024. It has been stable for 2 days so far.

    I hope this helps.

  6. #6
    ROG Guru: Yellow Belt Array
    Join Date
    Apr 2013
    Reputation
    17
    Posts
    142

    good result and info cookiemonster. thanks for posting.
    AsusCrosshairVIHero - 2700x@4.30Ghz~1.373v
    32Gb G.Skill RGB Trident 16gb3466Mhz + 16gb4266Mhz DDR4@3466mhz
    Titan Xp
    1TbSamsung960EVO M.2 1TbSamsung850EVO SSD Seagate2TB/3Tb CorsairForceGt 64gb
    TTtoughpower1200w80
    Thermaltake Core X71 Tempered glass side panal

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •