Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

how cold do you run your threadripper ? i am curious to see best performance

masterac
Level 8

‎10-23-2017 12:04 PM - last edited on ‎03-06-2024 09:21 PM by Community Admin

i ma able to run my 1950x to 29 degree celcius, it go to 31 sometime but stay most of the time under 30.

i use a EKWB watercooling loops that goes like this

pump > radiator 1 > gpu > radiator 2 > cpu > radiator 3 > reservoir > back to the pump.

radiator 1 is XE 240 60 mm thick
radiator 2 is CE 420 45 mm thick
radiator 3 is CE 280 45 mm thick
0 Kudos
5,614 Views
10 REPLIES 10

TheShowX1
Level 7

‎10-25-2017 05:08 PM

1950x here 128gb ram 3333mhz speed but set at 2133mhz.

Pump CPU Res RAD 360 60mm RES Pump

Pump GPU RES RAD 480 60mm RES Pump

stays at 28 to 29 mostly 30, 31 when oced at 4100mhz
0 Kudos

masterac
Level 8
In response to TheShowX1

‎10-25-2017 09:14 PM

TheShowX1 wrote:
1950x here 128gb ram 3333mhz speed but set at 2133mhz.

Pump CPU Res RAD 360 60mm RES Pump

Pump GPU RES RAD 480 60mm RES Pump

stays at 28 to 29 mostly 30, 31 when oced at 4100mhz



what ram are you using , i cant push mine and i dont know why
0 Kudos

vpkb1998
Level 7
In response to masterac

‎10-26-2017 08:51 AM

I use Enermax TR4 360. My system idles @ 17C @ stock and 22c @ 4Ghz, 1.350/1.375v.
0 Kudos

caknuckles
Level 7
In response to vpkb1998

‎10-27-2017 10:12 AM

vpkb1998 wrote:
I use Enermax TR4 360. My system idles @ 17C @ stock and 22c @ 4Ghz, 1.350/1.375v.


So your room ambient temp is 17c or lower? Sorry but there is no way unless you have your PC in a freezer.

I would suggest in the UEFI to put your overclock enhancement setting to auto, you are not seeing true temps. If I set that to 'enable' mine reads 11c .... lol
0 Kudos

relm56
Level 7
In response to caknuckles

‎10-27-2017 10:23 PM

With the Enermax 360 I am seeing 30 C idle, 53 C under load (Prime95 run). This is at stock settings
0 Kudos

TheShowX1
Level 7
In response to masterac

‎10-26-2017 10:25 AM

masterac wrote:
what ram are you using , i cant push mine and i dont know why



Trident Z RGB 3333mhz CL 16
0 Kudos

caknuckles
Level 7
In response to TheShowX1

‎10-27-2017 10:05 AM

I use a Bykski block and a OCool 30mm 560 rad. Fans at 30% idle at 3.9 is 24c ambient at 21c.

OC 3.9 full out for an hour or so goes to about 45c with fans at 60%, 40c with fans at 85%.
0 Kudos

Arne_Saknussemm
Level 40

‎02-11-2018 01:04 PM

Temps make no sense unless you include ambient.

20 ambient here idles 23 degrees
ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS
0 Kudos

BigJob
Level 10

‎02-12-2018 03:09 AM

I use my ex girlfriend's heart as my cpu cooler, below freezing temps. Overclock done right.
0 Kudos