cancel
Showing results for 
Search instead for 
Did you mean: 

128GB working kits with Zenith Extreme and 1950X

erefer
Level 7
Hi there,
Could someone recommend me 128gb kits that ACTUALLY work with this mobo and 1950X?
I am about to buy the 128GB TridentZ RGB DDR4 3600 kit but I don't know for sure if it's working.
Does anyone have the 128GB TridentZ RGB kit or other 128GB set that work without problems?
12,360 Views
16 REPLIES 16

Ljugtomten
Level 9
3600MHz is a waste of money as you'd most likely not be able to run it faster than 3066MHz as of today, if you are able to POST with all sticks.
Perhaps 3200MHz will be obtainable in the future with updates in UEFI and AGESA, I hope so atleast as I also have dual rank memory based on Samsung B-die.

Running 2 of these @ 2933.
CMR64GX4M4C3200C16

G.SKILL TridentZ RGB Series 128GB (8 x 16GB) 288-Pin DDR4 SDRAM DDR4 2933 (PC4 23400) AMD X399 Desktop Memory Model F4-2933C16Q2128GTZRX

Confirmed and working, replaced Corsair Vengeance LED 32GB (4x8GB) DDR4 3200 (PC4-25600) C16 for DDR4 Systems - White LED PC Memory (CMU32GX4M4C3200C16) which constantly caused my computer to shut off.

100% stability with TZRX model ram.

keep in mind, you'll likely be forced into a tighter air cooler or a waterblock, as I had to send back my noctua air cooler and put in my water cooling.


keep in mind, you'll likely be forced into a tighter air cooler or a waterblock, as I had to send back my noctua air cooler and put in my water cooling.

AdayaB, care to elaborate?
Why, because of temps? Or space requirements?

rajpotula - would be fantastic if you could do a couple simulation benchmarks (Flip??) in Houdini and then share the results and .hip file!!
And possibly share the results over on Odforce.net in the Hardware thread (active Houdini community)
Thanks!

legendarypoet wrote:
Running 2 of these @ 2933.
CMR64GX4M4C3200C16


Any special settings? Got one of those, will POST @ 2933, but is unstable in Windows.

masterac
Level 8
what setting are you using for the ram ? i have a 3600mhz and i cant oc it, in cpuz it stay at 1000hz, i am banging my head on the walls

masterac wrote:
what setting are you using for the ram ? i have a 3600mhz and i cant oc it, in cpuz it stay at 1000hz, i am banging my head on the walls



Running at the rated 2933/128GB quad channel 68410

Thank you all for your help guys.
AdayaB you are my hero!
This is the answer I wanted, a working 128gb Ram with this mobo.
Thank you!

Ok, can someone tell me if I should stick with my current 128GB of which only 64GB works and hope that mighty asus will hear my prayers and add support for my ram in near future or should I just buy different set?