11-22-2017 07:06 AM - last edited on 03-06-2024 08:26 PM by ROGBot
11-22-2017 10:14 AM
TorwaK wrote:
Update - Mode 1 has the same issue.
11-22-2017 12:36 PM
Silent Scone wrote:
Try Tweak Mode 1 once again, but increase VCCSA and IO manually to around 1.2v-1.25v
Tweak mode 1 has relaxed memory rules, which is why you're able to pass POST stress tests easier.
11-22-2017 01:10 PM
TorwaK wrote:
I set VCCSA and VCCIO voltages manually. When the system boots up normally it set these voltages around 1.3V automatically. So I manually entered them however it didn't work.
I ran the PC at 5.3Ghz and completed Prime95 (4 hours) and RealBench (2 hours). It's absolutely rock solid. However this cold boot problem due RAM is annoying.
04-17-2018 10:00 AM
TorwaK wrote:
I set VCCSA and VCCIO voltages manually. When the system boots up normally it set these voltages around 1.3V automatically. So I manually entered them however it didn't work.
I ran the PC at 5.3Ghz and completed Prime95 (4 hours) and RealBench (2 hours). It's absolutely rock solid. However this cold boot problem due RAM is annoying.
03-17-2019 09:20 PM
11-22-2017 02:29 PM
11-23-2017 01:10 AM
Shamino wrote:
hi you can workaround this inconsistent booting by going into dram timing, set mrc fast boot to enabled.