11-23-2017 12:16 AM - last edited on 03-05-2024 09:41 PM by ROGBot
11-23-2017 04:23 AM
11-23-2017 06:08 AM
11-23-2017 03:17 PM
11-23-2017 07:28 PM
11-27-2017 02:15 PM
Crysto wrote:
If you want to make sure excessive voltage isn't being applied with your BIOS settings, just open up CPU-Z and if you're under 1.3v you have nothing to worry about, and you can see the behaviour of your CPU speed. MCE (when I last saw it's awful implementation) was resulting in 1.4v+.
*Hopefully* by now ASUS has released a BIOS version that has sensible voltages and doesn't require intricate tweaking to get Intel like behaviour.
11-27-2017 02:44 PM
Dovakhan wrote:
I'm getting 1,344v under 100% load (Prime95, max energy usage option), both with XMP activated and deactivated (MCE always off). Is that voltage adequate?
11-27-2017 03:32 PM
11-27-2017 04:37 PM
11-28-2017 03:42 AM
Starscream wrote:
I have been running into the same issues, although with the Maximus. Here is what I did to finally get better voltages, but my temp is still rather high. With these settings I'm averaging 75C under load with spikes up to about 83C.
Cleared CMOS
Enabled XMP
Say yes at the prompt. (Saying no actually caused my CPU to throttle under load due to lack of power)
At this point in time, even with MCE set to Auto, the highest my clocks are going is 4300 under load. Without load, individual cores will hit 4700. (This is with the latest bios, the previous bios caused all cores to be @ 4700 with MCE on auto.)