Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Strix z370 f-gaimng 4030 Ram Compatibility

mikex999
Level 7

‎11-24-2017 10:41 AM - last edited on ‎03-05-2024 09:43 PM by Community Admin

Just bought the corsair ddr4 4000 CMK8GX4M2B4000C19

On my strix z370 f-gaming/ bios 4030 the xmp profile is unstable. running at 4000 or also lower like 3800 suddenly i got a bosd and windows memoey diagnostics found some issue. This never happen with my old corsair 3000mhz

CAn Asus finally give us a decent bios with mor compatibility? Paid over 250 euros for a no-compatible mb? wtf?
Labels:
0 Kudos
3,949 Views
6 REPLIES 6

Silent_Scone
Super Moderator

‎11-24-2017 11:48 AM

1) Set VVCIO and VCCSA to 1.2v - 1.25v
2) That kit is not on QVL so hasn't been validated for that board. It's good to check the qualified vendor lists before purchasing high binned kits.
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090
0 Kudos

mikex999
Level 7

‎11-24-2017 06:52 PM

ill try. Hope asus will ad more compatibility to qvl because there are few
0 Kudos

Praz
Level 13

‎11-24-2017 09:06 PM

Hello

Unless one is well versed in memory tuning it is best to aim for a couple of bins down from the max memory overclock listed. This is especially true if expecting plug n' play. 3733/3800 speeds are probably a more realistic expectation.
0 Kudos

mikex999
Level 7
In response to Praz

‎11-25-2017 07:20 AM

Praz wrote:
Hello

Unless one is well versed in memory tuning it is best to aim for a couple of bins down from the max memory overclock listed. This is especially true if expecting plug n' play. 3733/3800 speeds are probably a more realistic expectation.


according with microsoft memory diagnostic standard version 3700 is stable, for now:) BHut mu question is, why buy a 4000mhz when it is unstable. ?
0 Kudos

Silent_Scone
Super Moderator
In response to mikex999

‎11-25-2017 08:29 AM

mikex999 wrote:
according with microsoft memory diagnostic standard version 3700 is stable, for now:) BHut mu question is, why buy a 4000mhz when it is unstable. ?


Why indeed. 4000Mhz is indeed possible, but not on all CPU or modules without additional tuning. As Praz has already said, if looking for plug and play it's always best to opt for speeds a notch or two below the maximum rated frequency. Some users will have the nous to dial those speeds in on 4 DIMM boards, others won't. There are no guarantees 🙂
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090
0 Kudos

mikex999
Level 7

‎11-25-2017 01:07 PM

ok thanks, I'm not an overclock expert so I am using your precious adiveses. thanks again.
0 Kudos