©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

CanalPC · ‎11-25-2017

Hello guys.

They are my prints of Bios config,
Adjust CPU percentage value fix problem of cold bug with bios 1602

My memory is F4-3200C16D-16GTBZ with chips Hynix MFR and timing 16-18-18-18-38 at 3200mhz and i can run at 3333 16-16-16-16-36 without problems i last 3 month.
I'm using stock cooler

I hope to help

CanalPC · ‎11-25-2017

Neoony · ‎11-25-2017

Pictures seem a bit tiny

Too low resolution to actually read them.

This is how it looks

The ones in attachment are not working.

If you want to export all the settings, I think it should be readable in text editor if you export your Saved bios to a FAT32 usb (from within the bios)

CanalPC · ‎11-25-2017

Neoony wrote:
Pictures seem a bit tiny

Too low resolution to actually read them.

This is how it looks

The ones in attachment are not working.

If you want to export all the settings, I think it should be readable in text editor if you export your Saved bios to a FAT32 usb (from within the bios)

In the second post have screenshot with better resolution

Neoony · ‎11-26-2017

CanalPC wrote:
In the second post have screenshot with better resolution

Tried few, they all show up invalid

CanalPC · ‎11-27-2017

Well, i try post 5 pictures separately

Can you see? For me looks good.

CanalPC · ‎11-27-2017

CanalPC · ‎11-27-2017

g_tse · ‎11-28-2017

Hi Canal!

So changing the Digi+ Power Control settings has eliminated the cold boot bug for you?
I am currently running OCCT steady on bios 1701 with a similar P state setup (1800X @ 3800Mhz) and Flare X Ram (F4-3200C14D-16GFX)

CanalPC · ‎12-01-2017

g.tse wrote:
Hi Canal!

So changing the Digi+ Power Control settings has eliminated the cold boot bug for you?
I am currently running OCCT steady on bios 1701 with a similar P state setup (1800X @ 3800Mhz) and Flare X Ram (F4-3200C14D-16GFX)

Yes, for me, solved the problem

Try increase, SOC voltage for 1.15v

Fixed cold bug issues