AURA v1.05.27 [Report all issues in this thread]

[AkaNe0]

A new version of AURA software is now available.

DOWNLOAD AURA V1.05.27

Read the FAQ

Changelog for v1.05.27:

• Corsair memory kit "CMR" 2x8GB are now detected
• Fix stability issues
• Fix occasional high CPU loading issues
• Adjust effects settings
• Fix issue with Windows 10 Fall Creators Update
• Add support for Fusion 500 Headset

Side note
->For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
-> For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not light on.
-> For the addressable LED, the limit is set at 60 LEDs. We are working on increasing this limit for future version.

Having issues?
Before reporting, make sure to follow the below steps:
-> Have the latest BIOS for your motherboard.
-> Have the latest drivers and firmware installed for all your AURA Sync products.
-> Uninstall previous version of AURA through the Control Panel and reboot your system.

Problem with installing Aura, follow those steps:
1. Run Aura Cleaner tool available here
2. Uninstall Aura through the control panel
3. Shut down your computer completely (from the PSU / power plug).
4. Download the latest version of AURA available.
5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
6. Run "Setup" and reboot your system.

To report an issue
Please provide a detail description of your problem and your system specs, including:
Motherboard:
BIOS version:
Processor:
OS:
Memory kit:
Graphics card:
Mouse:
Keyboard:
Cooling solution:
Aura version:

[JustinThyme]

Awesome,
Ill load it up and see what happens.

[spadizzle]

Not a bug, just an observation. Instead of saying to restart on a document, why not have the "uninstaller" state that when it finishes. I know its nit picking. Other than that, installed just fine and so far so good.

[JustinThyme]

Not operational on X299
I was optimistic when I launched it and saw the MOBO listed again, then it locked slam up. All sections set to random static and have to use task manager to even close it.
Uninstalling......

Edit:
Gee thanks!!!!
RGB 1 is now dead
RGB2 is stuck in green
backplane is dead
armor and I/O shield are red
ROG logo under CPU and ROG EYE are dead

So to cap it off, Green on RGB 2 and red on I/O and armor.....everything else is DEAD!!
Yes its unintalled,
Yes powered down, turned off PSU for 5 minutes then back up.

If I ever get it working to default again hell will freeze over before I install AURA again

Motherboard: RVIE
BIOS version: 1004
Processor: 7900X
OS: Win10 Pro 1703
Memory kit: Corsair CMD64GX4M8X3800C19
Graphics card: Strix 1080Ti OC x2 in SLI (no RGB EK blocks installed
Mouse: Spatha
Keyboard: Claymore core
Cooling solution: EK monoblock on RGB1
Aura version: v1.05.27

Not in list
ASUS HB SLI block on RGB2 with Bitfenix 60CM strip

[AkaNe0]

Not a bug, just an observation. Instead of saying to restart on a document, why not have the "uninstaller" state that when it finishes. I know its nit picking. Other than that, installed just fine and so far so good.

Thanks, I have added your suggestion to the list.

Not operational on X299
I was optimistic when I launched it and saw the MOBO listed again, then it locked slam up. All sections set to random static and have to use task manager to even close it.
Uninstalling......

I sent out a PM.

[JustinThyme]

Thanks, I have added your suggestion to the list.



I sent out a PM.

Replied to PM

[spadizzle]

Thanks, I have added your suggestion to the list.



I sent out a PM.

Ok, after installing everything worked. Then I rebooted! Whoa, I noticed no AURA lights were on anywhere. Immediately launched AURA and tried turning on music:rock again. Nothing happened! :/ and the AURA froze. Tried end tasking and relaunching, didn't work either. I rebooted once more and the same thing happened.

Next restart I was going to uninstall, restart and reinstall. But before I did that, I decided for what ever reason to launch the AURA again. LoL Once it launched and I hit default on it. Rainbow kicked on and I again tried clicking music:rock. AURA Froze. So I restarted and noticed all AURA LED's were off again.

This time I launched AURA and just hit default and did nothing else. Rainbow kicked on and I decided to restart from there. Upon booting the lights stayed on this time. Got fully booted and launched AURA and started selecting between all the Lighting scenarios, was working like a charm, everything! So one last check on everything, SET MUSIC:Rock and restarted.

Got booted again and played music and was changing between all the scenarios again. Working fine now So what I gathered from this.

From the beginning :
Uninstall old version of AURA and restart (per instructions).
Install New AURA and once you launch it, hit default and restart one more time.
Hopefully on your 2nd restart ya'll shouldn't have any issues with it.

P.S. I don't know if hitting default on the old AURA would matter or not, maybe new AURA sets a conflict with the old one?




No longer running the 27 version. It kept freezing and I was trying to force it to go default and it wouldnt even do that. so back to the 25.

[spadizzle]

I'm going back to 25, version 27 has won and I give. After a few more restarts it went to crap again and couldn't recover. uninstall, regcleaned, and cleaned up software and reinstalled 25.

[drgabber]

I'm having the same issue with Aura v1.05.27 that I've had with all the versions after v1.04.29 on my ROG Crosshair VI Hero - Aura 1.05.27 will only detect my G.Skill RGB RAM. It does not detect the motherboard lighting or RGB strips plugged into the motherboard. I had to reboot and shut down a few times before it detected both sticks of RAM.

After uninstalling v1.05.27 and reinstalling v1.04.29, both sticks of RAM, motherboard lighting, and LED strips are all detected and working. I would really like it if the updated versions of Aura worked properly.

[Flint018]

Hi
I was really excited about this update. i thought it'll fix my previous problem but it is still the same.

the problem is somewhat ALL AURA EFFECT w/ Gradient settings suddenly will stop AURA from working while Playing GAMES. ill be stuck in the present colour from where it stopped. after that i tried to re-apply the settings, the mouse wont respond to re-application of settings. this happens sometimes on color cycle but most of the time on settings with gradient effects.

ADDITION: I noticed that when i removed the mouse from AURA sync, everything works fine.

Motherboard: z270f strix gaming mobo
BIOS Version/Date American Megatrends Inc. 1009, 23/07/2017
Processor: i7 7700k
OS: win10 64bit
Memory kit: 4x g.skill tridentz RGB
Graphics card: RX 580 strix 8gb TOP
Mouse: ROG Pugio
Keyboard: Rog Claymore
Cooling solution: Coolermaster 120mm RGB AURA
Aura version: aura v1.05.27
BIOS Version/Date American Megatrends Inc. 1009, 23/07/2017