AURA v1.05.27 [Report all issues in this thread]

[sevpl]

1.05.28 version not working, it freezes. I have tried everything.
Asus prime deluxe x299, 7820x, G.SKILL Trident Z RGB.

Back to 1.05.25

[namoi]

Where do you guys find the 28 version?
Can't find it on the maximus apex mobo support page.

Sent from my XT1562 using Tapatalk

[trungkien2496]

in version AURA V1.05.28.still LightingService (32) which is using 30%+ CPU constantly,

pls fix it.im using Z370F mobo

p/s : how can i control led Strip standalone without syncing ?

[RaZFiRe]

Motherboard: ASUS ROG B250F Strix
BIOS version: 0810
Processor: i5 7500
OS: Windows 10 x64
Memory kit: 2x4GB DDR4 Corsair Vengeance.
Graphics card: NVIDIA GTX 1060 GIGABYTE Windforce 6G
Mouse: ASUS ROG Pugio
Keyboard: Stock (Normal keyboard)
Cooling solution: 3x Fans.
Aura version: v1.05.27.

The issue I am having is like after a few minutes my AURA sync on my motherboard just stops working and is stuck there until I open the program again. And the music mode synced with my ROG Pugio Mouse gets stuck too when playing after like 3-4 minutes and I have no way whatsoever to run it again as I open AURA software again the Motherboard RGB just acts stuck changing lights from purple to random and gets just stuck, also my mouse just gets stuck on purple color until I unplug and replug the mouse and set the lighting mode from Armoury again.
Please help me with this issue I am really frustrated because of it, help will be really appreciated.
Thanks!

[RaZFiRe]

Motherboard: ASUS ROG B250F Strix
BIOS version: 0810
Processor: i5 7500
OS: Windows 10 x64
Memory kit: 2x4GB DDR4 Corsair Vengeance.
Graphics card: NVIDIA GTX 1060 GIGABYTE Windforce 6G
Mouse: ASUS ROG Pugio
Keyboard: Stock (Normal keyboard)
Cooling solution: 3x Fans.
Aura version: v1.05.27.

The issue I am having is like after a few minutes my AURA sync on my motherboard just stops working and is stuck there until I open the program again. And the music mode synced with my ROG Pugio Mouse gets stuck too when playing after like 3-4 minutes and I have no way whatsoever to run it again as I open AURA software again the Motherboard RGB just acts stuck changing lights from purple to random and gets just stuck, also my mouse just gets stuck on purple color until I unplug and replug the mouse and set the lighting mode from Armoury again.
Please help me with this issue I am really frustrated because of it, help will be really appreciated.
Thanks!

[janci11]

We're sorry. You can't access this item because it is in violation of our Terms of Service.

[Elek1987]

A new version of AURA software is now available.

DOWNLOAD AURA V1.05.27

Read the FAQ

Changelog for v1.05.27:

• Corsair memory kit "CMR" 2x8GB are now detected
• Fix stability issues
• Fix occasional high CPU loading issues
• Adjust effects settings
• Fix issue with Windows 10 Fall Creators Update
• Add support for Fusion 500 Headset

Side note
->For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
-> For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not light on.
-> For the addressable LED, the limit is set at 60 LEDs. We are working on increasing this limit for future version.

Having issues?
Before reporting, make sure to follow the below steps:
-> Have the latest BIOS for your motherboard.
-> Have the latest drivers and firmware installed for all your AURA Sync products.
-> Uninstall previous version of AURA through the Control Panel and reboot your system.

Problem with installing Aura, follow those steps:
1. Run Aura Cleaner tool available here
2. Uninstall Aura through the control panel
3. Shut down your computer completely (from the PSU / power plug).
4. Download the latest version of AURA available.
5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
6. Run "Setup" and reboot your system.

To report an issue
Please provide a detail description of your problem and your system specs, including:
Motherboard:
BIOS version:
Processor:
OS:
Memory kit:
Graphics card:
Mouse:
Keyboard:
Cooling solution:
Aura version:

Hi,

The link you provided here is not working to download,

Could you please provide a valid link?

Thank you

[Mapantz]

For the new version, you need to log in to https://www.asus.com and go to your registered product and choose your operating system. You will then see:

Version 1.05.28
2017/12/06

[Brighttail]

For the new version, you need to log in to https://www.asus.com and go to your registered product and choose your operating system. You will then see:

Version 1.05.28
2017/12/06

Or you can google something like the Rampage 6 Extreme. Normally the first one is the product page. Go to Support. Then go do drivers. Then choose OS and at least for the R6E.

[AkaNe0]

Thanks all for trying out the 1.05.27 version.

AURA 1.05.28 version is now available. Dedicated thread is available here.