Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    New ROGer Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    29

    Zenith Extreme + Enermax Liqtech TR4 360

    For those that have the Zenith Extreme and Enermax Liqtech TR4 360...

    1) Which header did you plug the pump into? CPU_OPT, W_PUMP+, or other? Seems like the cable is way too short to reach W_PUMP+ but I’m not sure it will run properly in CPU_OPT

    2) Can you fit 8 RAM chips? I’ve read reports where on some motherboards, the pump hoses blocked a RAM chip.

  2. #2
    New ROGer Array vpkb1998 PC Specs
    vpkb1998 PC Specs
    MotherboardZenith Extreme X399
    ProcessorRyzen Threadripper 1950X
    Memory (part number)Corsair Vengeance
    Graphics Card #1EVGA Nvidia 1080ti FE
    Storage #1Samsung 960 Pro
    OS Windows 10 Professional

    Join Date
    Oct 2017
    Reputation
    10
    Posts
    17

    I routed the cable around the VRM Heatsink and plugged it into the CPU FAN, no issues. I would rather use the Pump fan but as you know the cable is too short.

    Regarding RAM, you should have no issues installing 8 DIMMs, the water hoses are pretty long and will not get in the way.
    Click image for larger version. 

Name:	IMG_20171130_141410.jpg 
Views:	20 
Size:	1.32 MB 
ID:	69343

  3. #3
    New ROGer Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    29

    Thanks! Appreciate it!

  4. #4
    New ROGer Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    5

    Current Setup

    I also have the same setup but with 128GB RAM via 8 DIMMS. If you get the DIMM fans with your memory kit it will also cool your DIMM.2 NVME module but the room for the video card is tight is it have a metal back plate like the ROG 1080ti OC.

    Let me know how your unit arrives as my radiator arrives with coolant inside its shipping bag which made me think it was leaking from a below zero (frozen) shipping problem.

  5. #5
    New ROGer Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    29

    Curious, did you end up moving the Graphics Card to a different slot?

  6. #6
    New ROGer Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    5

    No, I removed the rubber padding on the RAM fan monting which allowed video card to fit into the first PCIe slot. I installed the video card first then the DIMM fans.

    Since the second PCIe x16 slot also goes to NUMA node 0, I put the 10G NIC there for best performance.
    Last edited by Eric Lajoie; 12-02-2017 at 11:25 PM.

  7. #7
    New ROGer Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    3

    cpu / cpu opt - ignore the "water pump" plug

    I installed the cord coming from the waterblock to the "cpu" pins and the radiator fans to "cpu_opt". It seems to work well.

  8. #8
    New ROGer Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    4

    I also plugged the waterblock pump into the CPUFAN header and the radiator fans to CPUOPT.

    The manual says the CPUFAN header can put out 1A of power, which should be plenty to run the pump.

    Been running this way for a few days and so far no issues.

  9. #9
    ROG Enthusiast Array leyabe PC Specs
    leyabe PC Specs
    MotherboardASUS ROG Zenith Extreme
    ProcessorAMD Threadripper 1950X
    Memory (part number)Team Dark Pro 16GB (4 x 8GB)
    Graphics Card #1AMD RX Vega 64 Liquid-cooled
    Sound CardOn-board
    MonitorAcer XR341CK
    Storage #1250 GB M.2 Samsung 960 EVO
    Storage #21 TB SSD Samsung 850 EVO
    CPU CoolerEnermax Liqtech TR4 360 AIO
    CaseCougar Panzer Max
    Power SupplyCorsair HX1000
    Keyboard G.Skill 780 MX
    Mouse Logitech G900 Chaos Spectrum
    Headset Logitech G330
    Mouse Pad Corsair keyboard + mouse mat
    Headset/Speakers Logitech 2.0 + Logitech 5.1
    OS Win10 X64
    Network RouterTP Link Archer C2600

    Join Date
    Sep 2017
    Reputation
    10
    Posts
    51

    Water block MUST be in the CPU fan header.
    As for the radiator, it doesn't matter. If your cord is too short to reach W_PUMP+, CPU_OPT will achieve just the same result.
    I have run mine for the first month or month and a half in the CPU_OPT but I have since then switched it to W_PUMP+ after re-working my cable management, either one works fine and no noticeable difference (theoretically there should not be any difference either).

  10. #10
    ROG Junior Member Array
    Join Date
    Jan 2017
    Reputation
    10
    Posts
    3

    Quote Originally Posted by vpkb1998 View Post
    I routed the cable around the VRM Heatsink and plugged it into the CPU FAN, no issues. I would rather use the Pump fan but as you know the cable is too short.

    Regarding RAM, you should have no issues installing 8 DIMMs, the water hoses are pretty long and will not get in the way.
    Click image for larger version. 

Name:	IMG_20171130_141410.jpg 
Views:	20 
Size:	1.32 MB 
ID:	69343
    Is your pump going strong? Mine seems failed. Hose near pump is hot, pump itself is definitely hot. Here's my CPU's idle temp and it has been throttling a lot. Room temp is 77'F
    Miniatura de Adjuntos Miniatura de Adjuntos 2018-02-06 15_00_20-HWiNFO64 v5.71-3330 Sensor Status [1 value hidden].jpg  


Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •