Results 1 to 10 of 382
-
12-08-2017 02:45 AM #1
AkaNe0 PC Specs Motherboard Maximus X Formula Processor i7-8700K Memory (part number) G.skill Trident-Z RGB Graphics Card #1 Strix GTX 1080 Ti Case OpenBenchtable Power Supply Seasonic PRIME Platinum 1000W Keyboard ROG Claymore Mouse ROG Pugio
- Join Date
- Jun 2014
- Reputation
- 19
- Posts
- 566
AURA 1.05.28 & 1.05.32.02 [Report all issues in this thread]
A new version of AURA software is now available.
DOWNLOAD AURA v1.05.32.02 Beta
DOWNLOAD AURA v1.05.28
Read the FAQ
Changelog for v1.05.28:
- Corsair memory kit "CMR" 2x8GB are now detected
- Fix stability issues
- Fix occasional high CPU loading issues
- Adjust effects settings
- Fix task bar issue
- Fix issue with Windows 10 Fall Creators Update
- Add support for Fusion 500 Headset
Side note
->For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
-> For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not light on.
-> For the addressable LED, the limit is set at 60 LEDs. We are working on increasing this limit for future version.
Having issues?
Before reporting, make sure to follow the below steps:
-> Have the latest BIOS for your motherboard.
-> Have the latest drivers and firmware installed for all your AURA Sync products.
-> Uninstall previous version of AURA through the Control Panel and reboot your system.
If you are still having problems with installing Aura, follow those steps:
1. Uninstall Aura through the control panel
2. Run Aura Cleaner tool available here
3. Shut down your computer completely (from the PSU / power plug).
4. Download the latest version of AURA available.
5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
6. Run "Setup" and reboot your system.
To report an issue
Please provide a detail description of your problem and your system specs, including:
Motherboard:
BIOS version:
Processor:
OS:
Memory kit:
Graphics card:
Mouse:
Keyboard:
Cooling solution:
Aura version:
Know issues:
1. Z170-Pro Gaming AURA users have problem with AURA UI being transparent.
2. Claymore flickering in breathing mode every 2 min
3. CPU usage / crash for some system configurationAnd don't forget, Keep pushing it !
-
12-08-2017 04:34 AM #2
- Join Date
- Nov 2017
- Reputation
- 10
- Posts
- 7
Most stable version so far
Just for the ones that are afraid to try this version, I can tell it has been the most stable one FOR ME so far. I loved that the Wave effect is faster than before, it looks so awesome!!!
Motherboard: Rog Strix B350-F Gaming
BIOS version: 3203
Processor: Ryzen 5 1600
OS: Windows 10 FCU Build 16299
Memory kit: Corsair 2x8GB CMR16GX4M2C3000C15
Graphics card: Rog Strix GTX 1080 Advanced
Mouse: Razer Naga Epic Chroma
Keyboard: Blackwidow Chroma
Cooling solution: Coolermaster AIO
Aura version: 1.05.28
-
12-08-2017 05:27 AM #3
Flint018 PC Specs Motherboard Rog Strix Z270F Processor i7 7700k Memory (part number) G.skill 2400 RGB x4 Graphics Card #1 rog strix rx580 top oc edition 8gb Graphics Card #2 rog strix GTX 1050Ti Monitor ASUS MG248QR CPU Cooler Cooler Master RGB Keyboard Rog Claymore Mouse Rog Pugio Headset Rog Strix Wireless Mouse Pad Rog Whetstone OS Win 10 64bit Accessory #1 Deep Cool RGB Strips x2 Accessory #2 Cooler Master PRO RGB 120mm 5pcs Accessory #3 Cooler master 3 way splitter x3
- Join Date
- Sep 2017
- Reputation
- 10
- Posts
- 47
Still the same since 1.05.25
Hi
Just copy pasted from my last report.
the problem is somewhat ALL AURA EFFECT w/ Gradient settings suddenly will stop AURA from working while Playing GAMES. ill be stuck in the present colour from where it stopped. after that i tried to re-apply the settings, the mouse wont respond to re-application of settings. this happens sometimes on color cycle but most of the time on settings with gradient effects.
I noticed that when i removed the mouse from AURA sync, everything works fine.
When I sync ROG PUGIO this happens unless i un-sync the mouse and restart my pc.
2nd ROG pugio already had my 1st pugio exchange for warranty purposes i told them its defective but it doesnt seems like it.
i hope someday this issue will get fixed, i really like ROG products. planning to buy AURA sync monitor but this issue is holding me back that the monitor will have the same problem.
Motherboard: z270f strix gaming mobo
BIOS Version/Date American Megatrends Inc. 1009, 23/07/2017
Processor: i7 7700k
OS: win10 64bit
Memory kit: 4x g.skill tridentz RGB
Graphics card: RX 580 strix 8gb TOP
Mouse: ROG Pugio
Keyboard: Rog Claymore
Cooling solution: Coolermaster 120mm RGB AURA
Aura version: aura v1.05.28
BIOS Version/Date American Megatrends Inc. 1009, 23/07/2017Last edited by Flint018; 12-11-2017 at 04:39 AM. Reason: typo
-
12-08-2017 05:57 AM #4
- Join Date
- Dec 2017
- Reputation
- 10
- Posts
- 4
I installed the 1.05.28 on my system.It has many bugs and at last it starts to crash. Effects take a while to be done in the pc and then Aura stops working. I return to 1.05.25 , it was working nice with the effects but the problem I had with that version was random crashes of pc . So far so many problems with the Aura's stablity and even installing. Asus team should work harder.
Cpu: 7820x
MB: Asus prime deluxe x299
VGA: Strix 1080ti
RAM: Gskill trident RGB
OS:Win 10 64bit
All the drivers and bios are latestLast edited by Atabak; 12-08-2017 at 05:59 AM.
-
12-08-2017 07:33 AM #5
AkaNe0 PC Specs Motherboard Maximus X Formula Processor i7-8700K Memory (part number) G.skill Trident-Z RGB Graphics Card #1 Strix GTX 1080 Ti Case OpenBenchtable Power Supply Seasonic PRIME Platinum 1000W Keyboard ROG Claymore Mouse ROG Pugio
- Join Date
- Jun 2014
- Reputation
- 19
- Posts
- 566
Thanks AlexGS.
Have you tried the 1.05.28?
I previously reported your case for trying to replicate but we weren't able to. Do you have any other software that controls lighting?
Also if you try to plug the Pugio on different USB port, does the results is the same?
First, please try to uninstall and reinstall AURA to see if this issue still happen. If yes, please let me know:
1) If you are running other lighting software
2) What is your keyboard, mouse and monitor models?
3) Let me know your Win 10 64 bits buildAnd don't forget, Keep pushing it !
-
12-08-2017 08:58 AM #6
- Join Date
- Oct 2017
- Reputation
- 10
- Posts
- 22
Asus Prime Deluxe X299
Bios 0802
7820x
Windows 10 Pro Version 1709
G.SKLILL Trident Z RGB
GeForce GT 710 (temporarily)
Standard mouse
Standard keyboard
Kraken X62
Aura 1.05.28
CAM software for Hue+ nad Kraken not running during and after installation.
Aura inastalled properly but after reboot system lights freeze and in the Aura software I can't change enything.
I'm used this procedure:
CAM software not start automatically.
Uninstall Aura.
Using Aura Cleaner from: https://rog.asus.com/forum/showthrea...l=1#post665136
Shut down, unplug power from PSU.
Install Aura as Administrator.
Reboot.
====
Another question:
Is it possible to set up default options in the aura?
After reboot system, settings return to Rainbow.
I don't know if the Rainbow Gradient works correctly.
For example: in settings it starts from red and ends on blue,
and now it should start again from red but it starts from blue and shows colors in reverse order.Last edited by sevpl; 12-08-2017 at 09:54 AM.
-
12-08-2017 02:04 PM #7
- Join Date
- Dec 2017
- Reputation
- 10
- Posts
- 4
Thanks for your response. I have reinstalled the new version several times and same problem occurs.
1. No other lighting software is installed.Logitech and Razer synapse are installed in my pc.
2. Keyboard is logitech g19s and Mouse is Razer ouroboros which none is Aura compatible, Monitor is Asus Mx27uq
3. Windows 10 fall edition and updated
4.Bios is updated and everything else.
1.05.25 works like charm except some times it causes pc crashes, but the 1.05.28 responds slowley and the Aura itslef crashes and not the pcLast edited by Atabak; 12-08-2017 at 02:08 PM.
-
12-08-2017 02:36 PM #8
Gofran PC Specs Motherboard ROG MAXIMUS XI FORMULA Processor i9-9900K Memory (part number) F4-3200C14D-32gb Graphics Card #1 Asus ROG STRIX GTX 1080 Ti Monitor Dell 2417dg Storage #1 970 evo 500gb Storage #2 951 nvme 500gb CPU Cooler ROG RYUO 240 Power Supply Asus RoG Thor 850W Keyboard Asus claymore Mouse Asus Spatha Mouse Pad Asus rog sheath OS Windows 10 Accessory #1 Phanteks Evolv x
- Join Date
- Mar 2016
- Reputation
- 11
- Posts
- 333
asus rog claymore flickering issue every 2 minute
version Lighting_Control_1.05.22 and Lighting_Control_1.05.16 works fine after that flickering issue starts even the latest version Lighting_Control_1.05.28 is flickering please check this
rog armoury is fully shutdown
-
12-08-2017 03:41 PM #9
- Join Date
- Oct 2017
- Reputation
- 10
- Posts
- 4
Motherboard:Z370F Strix
BIOS version: 0430
Processor: i3 8100
OS: Window 10 Fall Creator
Memory kit: GSkill Trident Z RGB
Graphics card: Strix 970
Mouse: Rival 100
Keyboard: Corsair Strafe RGB
Cooling solution: NZXT X52
Aura version: 1.05.28
-------------------------------------------------------------
AURA V1.05.28.still LightingService (32) which is using 30%+ CPU constantly
pls fix it
and how to control LED Strip Standalone without Syncing with main ?
-
12-08-2017 05:12 PM #10
Flint018 PC Specs Motherboard Rog Strix Z270F Processor i7 7700k Memory (part number) G.skill 2400 RGB x4 Graphics Card #1 rog strix rx580 top oc edition 8gb Graphics Card #2 rog strix GTX 1050Ti Monitor ASUS MG248QR CPU Cooler Cooler Master RGB Keyboard Rog Claymore Mouse Rog Pugio Headset Rog Strix Wireless Mouse Pad Rog Whetstone OS Win 10 64bit Accessory #1 Deep Cool RGB Strips x2 Accessory #2 Cooler Master PRO RGB 120mm 5pcs Accessory #3 Cooler master 3 way splitter x3
- Join Date
- Sep 2017
- Reputation
- 10
- Posts
- 47
[QUOTE=AkaNe@Asus;691153]Thanks AlexGS.
Have you tried the 1.05.28?
I previously reported your case for trying to replicate but we weren't able to. Do you have any other software that controls lighting?
Also if you try to plug the Pugio on different USB port, does the results is the same?
Ow sorry, yes i have 1.05.28 version already, No i dont have anyother lighting controls software, and yes i tried to put on other USB sockets and still the same.
BTW- CPU usage still having a spike especially when playing games it contributes on stopping the lights to change color or to work properly.Last edited by Flint018; 12-08-2017 at 05:22 PM. Reason: additional information