Results 1 to 10 of 382

Threaded View

  1. #11
    ROG Enthusiast Array
    Join Date
    Feb 2017

    Motherboard: Maximus X Formula Z370
    BIOS version: 1003 (Latest)
    Processor: i7 8700K
    OS: Windows 10 Pro Creators Fall Update (Latest 1709)
    Memory kit: G.SKILL RGB Trident Z RGB 32GB 3600Mhz
    Graphics card: Nvidia 1080 Ti FE
    Mouse: Logitech G700
    Keyboard: Logitech G710+
    Cooling solution: Custom Acrylic Loop
    Aura version: 1.05.28 (Also tried older versions)

    Fresh install of the latest version of Windows 10 is installed.
    I did the whole "Unblock" when extracting, and installed "As Administrator
    It installed, and I shut down in between installing and first opening the program.

    1. The only modes that seem to work are Static, Breathing, and Color Cycle. When I select any other mode, it thinks for a few seconds and then goes back to Color cycle.

    2. My Addressable RGB Strip from CableMods does not light up. It is connected to the first header on the motherboard. It seems to be detected in the software. In the settings menu, it shows ADD Strip, and I changed the "LED Numbers" value to 15. (I am assuming that value is referring to the number of LEDs on the strip. The default was 60)

    3. When I select the DRAM or ADD Strip from the ribbon menu at the top of the window, I am assuming it un-links the component? I get a pop-up that says "Do you want to save the change ?" When I click "Yes", the application hangs and I have to force end the application.

    4. The application seems very very slow to respond, taking several seconds to update or to react to changes I make.

    Hopefully this will get resolved.
    Last edited by Jsunn; 01-15-2018 at 12:53 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts