Results 1 to 10 of 383

Threaded View

  1. #1
    ROG Guru: Green Belt Array AkaNe0 PC Specs
    AkaNe0 PC Specs
    MotherboardMaximus X Formula
    Memory (part number)G.skill Trident-Z RGB
    Graphics Card #1Strix GTX 1080 Ti
    Power SupplySeasonic PRIME Platinum 1000W
    Keyboard ROG Claymore
    Mouse ROG Pugio
    AkaNe0's Avatar
    Join Date
    Jun 2014

    AURA 1.05.28 & [Report all issues in this thread]

    A new version of AURA software is now available.

    DOWNLOAD AURA v1.05.32.02 Beta

    DOWNLOAD AURA v1.05.28

    Read the FAQ

    Changelog for v1.05.28:
    • Corsair memory kit "CMR" 2x8GB are now detected
    • Fix stability issues
    • Fix occasional high CPU loading issues
    • Adjust effects settings
    • Fix task bar issue
    • Fix issue with Windows 10 Fall Creators Update
    • Add support for Fusion 500 Headset

    Side note
    ->For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
    -> For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not light on.
    -> For the addressable LED, the limit is set at 60 LEDs. We are working on increasing this limit for future version.

    Having issues?
    Before reporting, make sure to follow the below steps:
    -> Have the latest BIOS for your motherboard.
    -> Have the latest drivers and firmware installed for all your AURA Sync products.
    -> Uninstall previous version of AURA through the Control Panel and reboot your system.

    If you are still having problems with installing Aura, follow those steps:

    1. Uninstall Aura through the control panel
    2. Run Aura Cleaner tool available here
    3. Shut down your computer completely (from the PSU / power plug).
    4. Download the latest version of AURA available.
    5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
    6. Run "Setup" and reboot your system.

    To report an issue
    Please provide a detail description of your problem and your system specs, including:
    BIOS version:
    Memory kit:
    Graphics card:
    Cooling solution:
    Aura version:

    Know issues:
    1. Z170-Pro Gaming AURA users have problem with AURA UI being transparent.
    2. Claymore flickering in breathing mode every 2 min
    3. CPU usage / crash for some system configuration
    And don't forget, Keep pushing it !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts