Results 1 to 9 of 9
  1. #1
    ROG Enthusiast Array
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    40

    Are the screws in the G751JL glued in?

    I'm trying to replace the keyboard palmrest, but I just can't get the screws out. I took the ones out of the back just fine, but the HDD screws and the ones on the DVD drive (for example, at 2:30 here https://www.youtube.com/watch?v=AuhdXBzZODY ) won't come out at all. Additionally they seem very soft becuase the hole is getting warped from only a little force, making it even harder!

    Any advice for getting these off?

  2. #2
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,857

    No glue but they do have locktite.
    First and foremost, get a good set of drivers, not the $2 specials. You need one that fits the hardware correctly and the cheap tools seldom do.

  3. #3
    ROG Enthusiast Array
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    40

    I used a pretty good screwdriver (one I use in the computer lab where I work) and the screws just will not come out. I think I stripped the top of a few of them because they're in so tight. They're either rusted, glued, or too much loctite... I don't know, but it's really pissing me off because I can't install the 90€ keyboard palmrest I ordered.

  4. #4
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    301
    Posts
    7,628

    Now that the heads are stripped it's probably too late but one trick I use is sometimes if you *tighten* threaded things slightly it can get things moving enough to be able to loosen them. Works with screws, bolts, and jelly jars. For the heads that are stripped you'll either have to find a very small screw extractor or just drill them out. Not fun
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  5. #5
    ROG Guru: Gold Belt Array Clintlgm PC Specs
    Clintlgm PC Specs
    Laptop (Model)Asus G752VY DH72
    MotherboardAsus Z97 Pro WiFi and /Z97 Pro A
    ProcessorI7 4790K
    Storage #1512 GB M.2 Samsung 960 Pro
    Storage #21 TB Samsun 850 Pro
    CaseCool Master Haf
    OS Win 8.1 Pro and Win 10 Pro
    Clintlgm's Avatar
    Join Date
    Jul 2012
    Reputation
    105
    Posts
    4,136

    Yes I use a heat on locktited parts, a soldering pencil should be enough for computer screws. I have to say I've never had to remove a screw that small with stripped head, don't envy you in any way.
    G752VY-DH72 Win 10 Pro
    512 GB M.2 Samsung 960 Pro
    1 TB Samsung 850 pro 2.5 format
    980m GTX 4 GB
    32GB DDR 4 Standard RAM

    Z97 PRO WiFi I7 4790K
    Windows 10 Pro
    Z97 -A
    Windows 10 Pro

  6. #6
    Banned Array JustinThyme PC Specs
    JustinThyme PC Specs
    Laptop (Model)G752VY-DH72
    MotherboardRampage VI Extreme
    ProcessorI9 9940X
    Memory (part number)64GB DDR4 8x8 Corsair Dominator Platinum 3800 MHz @ C17
    Graphics Card #1ASUS Strix 2080Ti O11G @ 2.1GHz
    Graphics Card #2ASUS Strix 2080Ti O11G @ 2.1Ghz
    Graphics Card #3ROG Nvlink
    Graphics Card #4Have to feed animals
    Sound CardExternal Audioengine D1 24 bit 192kbps DAC
    MonitorASUS PG348Q @ 100Hz
    Storage #1Intel 905P 480GB U2 flavor
    Storage #2Samsung 850 EVO 1TB X2 in RAID 0, 960 PRO 1TB DIMM.2_1
    CPU CoolerHeatKiller IV PRO and VRM blocks ,Dual D5 PWM serial, 2X 480, 1X 360 RADS
    CasePhanteks Enthoo Elite 8X LL120 PWM, 3X LL140 PWM, 12 SP120 PWM 1x AF140 PWM
    Power SupplyCorsair AX 1500i
    Keyboard ASUS Claymore
    Mouse ASUS Spatha, Logitech MX Master
    Headset Sennheiser HD 700
    Mouse Pad ASUS ROG Sheath
    Headset/Speakers Audioengine A5+ with SVS SB-1000 Sub
    OS Win10 Pro 1809
    Network RouterNetGear NightHawk X10
    Accessory #1 NetGear Prosafe 10GBe Switch
    Accessory #2 Qnap TVS-682 NAS modded with I7 CPU

    Join Date
    Nov 2013
    Reputation
    144
    Posts
    3,857

    Its blue locktite, only a portion is dipped and dry before they install them.

    Those screws are so small I dont believe there is an easy out small enough to get to them.

    Im afraid if the heads are now toast the only thing left is to drill the heads off. Ive had to do this on other apparatus before. Just go slow, use a vaccum to get the metal as its removed and just enough to get the head off where you can remove the drive. Then you can get a hold of the stud with a pair of small vice grips. The other PITA is finding replacement screws.

  7. #7
    ROG Enthusiast Array
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    40

    So this is a bit embarassing but I borrowed a solid titanium screwdriver from somebody in the engineering department and it got those stripped glued screws off with no trouble. No heat, no glue solvent, etc. So uhh, I guess the moral of the story is, don't overthink it when it comes to tools?

  8. #8
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    301
    Posts
    7,628

    Probably your first driver didn't have the right taper to bite into the slots fully. It happens. I sometimes try several bits in my driver set before I find the best fit.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  9. #9
    ROG Guru: Gold Belt Array Clintlgm PC Specs
    Clintlgm PC Specs
    Laptop (Model)Asus G752VY DH72
    MotherboardAsus Z97 Pro WiFi and /Z97 Pro A
    ProcessorI7 4790K
    Storage #1512 GB M.2 Samsung 960 Pro
    Storage #21 TB Samsun 850 Pro
    CaseCool Master Haf
    OS Win 8.1 Pro and Win 10 Pro
    Clintlgm's Avatar
    Join Date
    Jul 2012
    Reputation
    105
    Posts
    4,136

    Yes Justin mentioned that in his first reply quality tools, these tiny little screws in these notebooks can be really difficult If you do strip the head on one.
    G752VY-DH72 Win 10 Pro
    512 GB M.2 Samsung 960 Pro
    1 TB Samsung 850 pro 2.5 format
    980m GTX 4 GB
    32GB DDR 4 Standard RAM

    Z97 PRO WiFi I7 4790K
    Windows 10 Pro
    Z97 -A
    Windows 10 Pro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •